How about some pics of 47-59

[AD51]

Thanks, its on a 02 S10 frame, dropped 4" in the rear, rear fenders are lowered 2" and have 2"ddropped spindals in front.

[MeanYellowZ]

Not sure if I ever posted this one we just finished up...

[hsdropout]

Holy Smokes!................that is scary lookin there MeanYellowZ.
Got more pics.................or better yet, a vid of a burn out?

[mud.man.rj]

Wow, meanyellowz, that is a nice truck, looks sedate outside until the hood is open, how do you keep tires on it, they don't look very wide. I agree we need to see more of it.

[fisherman420]

Sleepers kick A$$! nice ride meanyellowz

[dew468]

finally got the bed painting done.

[Ronald B]

Here is my 1950

[NorCalGal]

[/IMG]



Heres my baby so far!

[HSRACER]

My 53. Fuel injected 383, 700r, 3.42 rear end

[HSRACER]

My wife's 54

[HSRACER]

This is the 57 my avatar picture came from. It was a handful with over 750HP!

[HSRACER]

The fun 1950. We had so much fun with this one driving cross country on a couple power tours. Should have kept it!

[Mackula02]

This are nice... Do you still own 2 of them?

[lower50's]

Originally Posted by tobins 52 gmc

here is my 52 GMC 5 window , first time on the road in about 25 years , 7 years to get to here and maybe a couple more to finish

Love It !!!

[lower50's]

MeanYellowZ Never guessed it would have twin turbo Wicked truck!!

[ratty 46]

HSRACER - That truck is soooooo iconic & is the staple of judgment of all '47-55 trucks.

I believe it had a twin??

R46

[HSRACER]

Macula-- yes I still own 3 trucks and soon to purchase a fourth.

Ratty 46-- which truck were you referring to? And a twin?

[HSRACER]

Is this the twin you were referring to?

[NorCalGal]

I'm going to try posting a pic again.

My project so far / 53 bed shortened 4"/ 17 wheels (for mock up) / 2" drop spindles in front / 3" lowered leafs in rear / ZZ4 crate / beefed up TH350 trans / gear vendors overdrive / 8.8 373 posi rearend.

[58CameoAZ]

Originally Posted by HSRACER

Is this the twin you were referring to?

Nice Truck can you tell us about the rear bumper?
Is that a Fleetside bumper flipped or altered stepside rear bumper
Nice look either way
Allen

[58CameoAZ]

Originally Posted by HSRACER

Is this the twin you were referring to?

Nice Truck can you tell us about the rear bumper?
Is that a Fleetside bumper flipped or altered stepside rear bumper
Nice look either way
Allen

[ratty 46]

HSRACER ... the twin was done in a similar style as the "Deadwood" truck but the signage was a bit different ... If I remember ... a friend did it or you helped. Can't remember exactly. That's what happens when you get old ... first thing to go - memory - second? Can't remember.

[HSRACER]

The grunge truck with the deadwood mortuary signage was done earlier and was in some type of truck magazine. That magazine was where I first saw the truck that we modeled my truck on. I had forgotten about that until you reminded me. Thanks

[HSRACER]

The rear bumper was a fleet side that was flipped so we could bring the exhaust out the center and keep the truck super low. Turned out really well but it was quite a challenge to get the exhaust around all the suspension and gas tank then to the center exit. The bumper itself was easy to flip. It was trimmed a little to bring it closer to the bed width.

[Bernman72]

Originally Posted by HSRACER

Here is my 650 hp 1954. Hope you like it!

Is it fast and hook up? I am building a 1956 chevy with 723hp with ford 9" and four bar.