"Wally" The 68 Service Truck - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

n2billet · 01-09-2015, 11:42 PM

Also painted the trans.

n2billet · 01-09-2015, 11:59 PM

Got the motor installed using 73-87 perches and Dirty Dingo Sliders for the 5.3 and Porterbuilt for the 4L60e

**Palf70Step** · 01-10-2015, 10:51 AM

Wally will look really good at Cruising the Coast (I hope).

knomadd · 01-10-2015, 05:11 PM

I love this truck! Been seeing pics in other places, like the T-shirt. I'll be watching.

likaroc13 · 01-10-2015, 11:40 PM

Too cool, & you're doing a great job! Curious what high-temp silver paint you're using?

n2billet · 01-11-2015, 10:39 AM

Quote:

Originally Posted by likaroc13

Too cool, & you're doing a great job! Curious what high-temp silver paint you're using?

It's a Duplicolor high temp paint, I believe it's DE1650

Malamute · 01-11-2015, 10:47 AM

Looks great Keith! I know you told me long ago but what flat black paint are you using on the chassis?

n2billet · 01-11-2015, 11:12 AM

Body worked and started painted some of the stuff under the hood

n2billet · 01-11-2015, 11:12 AM

More

n2billet · 01-11-2015, 11:13 AM

Small stuff

n2billet · 01-11-2015, 11:14 AM

Quote:

Originally Posted by Malamute

Looks great Keith! I know you told me long ago but what flat black paint are you using on the chassis?

If it's a small area, Krylon Industrial semi-flat black 1613

**nlped** · 01-11-2015, 11:16 AM

Keith, what's the story on that paint booth set up? That'd be great for me...

Thanks

n2billet · 01-11-2015, 11:18 AM

I made a bracket to hold the PCM under the dash using factory holes. I also modified the TAC module to bolt on the PCM so it's all together.

n2billet · 01-11-2015, 11:25 AM

Starting to slowly go back together.

n2billet · 01-11-2015, 11:29 AM

I modified the heater box to run my A/C and heater hoses and filled in the blower motor cover.

n2billet · 01-11-2015, 11:31 AM

Heater box back in the truck.

n2billet · 01-11-2015, 11:34 AM

Have most of the front sheet metal back on, still a long way to go.

n2billet · 01-11-2015, 11:38 AM

Quote:

Originally Posted by nlped

Keith, what's the story on that paint booth set up? That'd be great for me...

Thanks

It's a 10x20 portable garage (basically a tent) with lighting on top and in the middle, we also put roofing paper on the floor to keep the paint off the concrete and since it's a little sticky it helps keep the dust down....very low tech but it works

Malamute · 01-11-2015, 11:39 AM

Quote:

Originally Posted by n2billet

If it's a small area, Krylon Industrial semi-flat black 1613

Thanks.

n2billet · 01-11-2015, 11:47 AM

I like to cover the wires coming out on the firewall so this time we tried something a little different than the last ones I've made. I started by making a aluminum ring that bolts to the firewall.

n2billet · 01-11-2015, 12:01 PM

Then I used a blower motor cover off a 67 Nova and bolted it to the ring to hide the wires. I heat shrieked the wires later to make them look a little cleaner.

likaroc13 · 01-11-2015, 01:08 PM

Quote:

Originally Posted by n2billet

It's a Duplicolor high temp paint, I believe it's DE1650

Thanks. You're making nice progress, & it's clean work!

Willys47 · 01-11-2015, 02:41 PM

Thank for sharing your keep it clean Ideas they look real good

**GAc10boy** · 01-11-2015, 02:51 PM

So clean!

northern 85 · 01-11-2015, 03:09 PM

Wow!

01-09-2015, 11:42 PM	#51
n2billet Village Idiot.... Join Date: Jul 2003 Location: Rowlett, Texas Posts: 1,833	Re: "Wally" The 68 Service Truck Also painted the trans. Attached Images __________________ http://www.hubgarage.com/mygarage/n2billet -67 SWB Custom Porterbuilt Front and rear 20/22's Hazel Sold -71 StepSide Porterbuilt Stage 2 with 20/22's Stella Mae Sold

01-09-2015, 11:59 PM	#52
n2billet Village Idiot.... Join Date: Jul 2003 Location: Rowlett, Texas Posts: 1,833	Re: "Wally" The 68 Service Truck Got the motor installed using 73-87 perches and Dirty Dingo Sliders for the 5.3 and Porterbuilt for the 4L60e Attached Images __________________ http://www.hubgarage.com/mygarage/n2billet -67 SWB Custom Porterbuilt Front and rear 20/22's Hazel Sold -71 StepSide Porterbuilt Stage 2 with 20/22's Stella Mae Sold

01-10-2015, 10:51 AM	#53
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 47,522	Re: "Wally" The 68 Service Truck Wally will look really good at Cruising the Coast (I hope). __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

01-10-2015, 05:11 PM	#54
knomadd Registered User Join Date: Jul 2012 Location: Rosenberg, Texas Posts: 3,506	Re: "Wally" The 68 Service Truck I love this truck! Been seeing pics in other places, like the T-shirt. I'll be watching. __________________ -Duane C/10 Club Texas member 1971 Chevy C10 "Brutus" SWB Fleetside 2016 6.0L (L96) 6L90E (driver/project) 1965 Pontiac GTO "Royal Goat" 400/TH400 w/AC (my baby)

01-10-2015, 11:40 PM	#55
likaroc13 Rollin' Old Skool Join Date: Jun 2007 Location: Hattiesburg, MS Posts: 5,371	Re: "Wally" The 68 Service Truck Too cool, & you're doing a great job! Curious what high-temp silver paint you're using? __________________ _____________________________________________ Phillip My Build threads: 1966 Chevy C-10 "Black Betty" shortbed, fleetside, BBW, 327 V8/ Powerglide (under construction) http://67-72chevytrucks.com/vboard/s...ighlight=betty 1997 Chevy Tahoe, 2dr/2wd, mild custom (Daily driver) http://67-72chevytrucks.com/vboard/s...d.php?t=601142 Pics: '66 C-10 https://flic.kr/s/aHsjHWD4h9 '97 Tahoe https://flic.kr/s/aHsjGZ7wKP '93 C-1500 https://flic.kr/s/aHskxdpdnQ '88 S-10 Blazer https://flic.kr/s/aHsjYGx4Md Previous Rides: 1993 Chevy S-10 ext. cab, 4.3L, 4/5 drop (Sold) 1993 Chevy C-1500 short/step Retro-Rod (Sold) 1988 S-10 Blazer 2dr/2wd mild custom (Sold)

01-11-2015, 10:47 AM	#57
Malamute Registered User Join Date: Sep 2011 Location: Louisville, KY Posts: 756	Re: "Wally" The 68 Service Truck Looks great Keith! I know you told me long ago but what flat black paint are you using on the chassis?

01-11-2015, 11:12 AM	#58
n2billet Village Idiot.... Join Date: Jul 2003 Location: Rowlett, Texas Posts: 1,833	Re: "Wally" The 68 Service Truck Body worked and started painted some of the stuff under the hood Attached Images __________________ http://www.hubgarage.com/mygarage/n2billet -67 SWB Custom Porterbuilt Front and rear 20/22's Hazel Sold -71 StepSide Porterbuilt Stage 2 with 20/22's Stella Mae Sold

01-11-2015, 11:12 AM	#59
n2billet Village Idiot.... Join Date: Jul 2003 Location: Rowlett, Texas Posts: 1,833	Re: "Wally" The 68 Service Truck More Attached Images __________________ http://www.hubgarage.com/mygarage/n2billet -67 SWB Custom Porterbuilt Front and rear 20/22's Hazel Sold -71 StepSide Porterbuilt Stage 2 with 20/22's Stella Mae Sold

01-11-2015, 11:13 AM	#60
n2billet Village Idiot.... Join Date: Jul 2003 Location: Rowlett, Texas Posts: 1,833	Re: "Wally" The 68 Service Truck Small stuff Attached Images __________________ http://www.hubgarage.com/mygarage/n2billet -67 SWB Custom Porterbuilt Front and rear 20/22's Hazel Sold -71 StepSide Porterbuilt Stage 2 with 20/22's Stella Mae Sold

01-11-2015, 11:16 AM	#62
nlped Senior Member Join Date: Jul 2009 Location: Hayden, Al. Posts: 4,148	Re: "Wally" The 68 Service Truck Keith, what's the story on that paint booth set up? That'd be great for me... Thanks __________________ Carter 1968 Chevy SWB Fleet... Walt 1963-1/2 Ford Falcon Futura...Martha

01-11-2015, 11:18 AM	#63
n2billet Village Idiot.... Join Date: Jul 2003 Location: Rowlett, Texas Posts: 1,833	Re: "Wally" The 68 Service Truck I made a bracket to hold the PCM under the dash using factory holes. I also modified the TAC module to bolt on the PCM so it's all together. Attached Images __________________ http://www.hubgarage.com/mygarage/n2billet -67 SWB Custom Porterbuilt Front and rear 20/22's Hazel Sold -71 StepSide Porterbuilt Stage 2 with 20/22's Stella Mae Sold

01-11-2015, 11:25 AM	#64
n2billet Village Idiot.... Join Date: Jul 2003 Location: Rowlett, Texas Posts: 1,833	Re: "Wally" The 68 Service Truck Starting to slowly go back together. Attached Images __________________ http://www.hubgarage.com/mygarage/n2billet -67 SWB Custom Porterbuilt Front and rear 20/22's Hazel Sold -71 StepSide Porterbuilt Stage 2 with 20/22's Stella Mae Sold

01-11-2015, 11:29 AM	#65
n2billet Village Idiot.... Join Date: Jul 2003 Location: Rowlett, Texas Posts: 1,833	Re: "Wally" The 68 Service Truck I modified the heater box to run my A/C and heater hoses and filled in the blower motor cover. Attached Images __________________ http://www.hubgarage.com/mygarage/n2billet -67 SWB Custom Porterbuilt Front and rear 20/22's Hazel Sold -71 StepSide Porterbuilt Stage 2 with 20/22's Stella Mae Sold

01-11-2015, 11:31 AM	#66
n2billet Village Idiot.... Join Date: Jul 2003 Location: Rowlett, Texas Posts: 1,833	Re: "Wally" The 68 Service Truck Heater box back in the truck. Attached Images __________________ http://www.hubgarage.com/mygarage/n2billet -67 SWB Custom Porterbuilt Front and rear 20/22's Hazel Sold -71 StepSide Porterbuilt Stage 2 with 20/22's Stella Mae Sold

01-11-2015, 11:34 AM	#67
n2billet Village Idiot.... Join Date: Jul 2003 Location: Rowlett, Texas Posts: 1,833	Re: "Wally" The 68 Service Truck Have most of the front sheet metal back on, still a long way to go. Attached Images __________________ http://www.hubgarage.com/mygarage/n2billet -67 SWB Custom Porterbuilt Front and rear 20/22's Hazel Sold -71 StepSide Porterbuilt Stage 2 with 20/22's Stella Mae Sold



Register or Log In To remove these advertisements.

01-11-2015, 11:47 AM	#70
n2billet Village Idiot.... Join Date: Jul 2003 Location: Rowlett, Texas Posts: 1,833	Re: "Wally" The 68 Service Truck I like to cover the wires coming out on the firewall so this time we tried something a little different than the last ones I've made. I started by making a aluminum ring that bolts to the firewall. Attached Images __________________ http://www.hubgarage.com/mygarage/n2billet -67 SWB Custom Porterbuilt Front and rear 20/22's Hazel Sold -71 StepSide Porterbuilt Stage 2 with 20/22's Stella Mae Sold

01-11-2015, 12:01 PM	#71
n2billet Village Idiot.... Join Date: Jul 2003 Location: Rowlett, Texas Posts: 1,833	Re: "Wally" The 68 Service Truck Then I used a blower motor cover off a 67 Nova and bolted it to the ring to hide the wires. I heat shrieked the wires later to make them look a little cleaner. Attached Images __________________ http://www.hubgarage.com/mygarage/n2billet -67 SWB Custom Porterbuilt Front and rear 20/22's Hazel Sold -71 StepSide Porterbuilt Stage 2 with 20/22's Stella Mae Sold

01-11-2015, 02:41 PM	#73
Willys47 Registered User Join Date: Dec 2007 Location: Nanaimo B.C. Posts: 604	Re: "Wally" The 68 Service Truck Thank for sharing your keep it clean Ideas they look real good __________________ I was hooked on these trucks since 1982 when I drove my budys fathers 1968 Custum GMC 396 automatic dana 60 rear with a power lock diff what a ride more fun then we will we can ever tell!!

01-11-2015, 02:51 PM	#74
GAc10boy Senior Member Join Date: Oct 2013 Location: Marietta, GA Posts: 1,642	Re: "Wally" The 68 Service Truck So clean! __________________ - Robbie UNITED BY TRUCKS - classic truck video content YouTube: www.youtube.com/c/unitedbytrucks Instagram: @united_by_trucks Paw Paw '68 508 Dark Blue Custom C10 Teddy '68 GMC SWB 503 Light Green LS Build Mississippi Mud '75 Skyline Blue Patina SBC Build

01-11-2015, 03:09 PM	#75
northern 85 Registered User Join Date: Mar 2005 Location: Fairfield Maine Posts: 1,759	Re: "Wally" The 68 Service Truck Wow!

Register or Log In To remove these advertisements.