The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 01-28-2015, 01:22 PM   #1
B-wayne44
Registered User
 
Join Date: Oct 2014
Location: forney, TX
Posts: 13
1984 305 GMC serria carb issue!

I posted in another section about this problem but I figured I'd try here as well. I changed the spark plugs and wires over the Christmas holidays and after I was done I went to crank it and the motor just raced! The carb acted wide open. I got the gapping on the spark plugs right and triple checked all the wires were on there good and in the right spot too. Looked up and down the carb and no missing springs or bent cables.. So I adjusted the dist cap till it would t turn over and slowley kept turning it back till it cranked.. Still the same problem. Looked at all the vacuume hoses and they are all intact. I'm at a loss and have NOO stinkin clue what could be causing this! Any help or suggestions would be highly appreciated!
__________________
1984 GMC c1500

"The Welder"
B-wayne44 is offline   Reply With Quote
Old 01-28-2015, 02:02 PM   #2
geezer#99
Registered User
 
geezer#99's Avatar
 
Join Date: Aug 2009
Location: Bowser
Posts: 13,731
Re: 1984 305 GMC serria carb issue!

When in doubt, post a pic!!
geezer#99 is online now   Reply With Quote
Old 01-28-2015, 02:53 PM   #3
Bigstevex4
Registered User
 
Bigstevex4's Avatar
 
Join Date: Oct 2014
Location: Spearfish South Dakota
Posts: 407
Re: 1984 305 GMC serria carb issue!

carb spring or linkage carb can only race if throttle plate is open.
Bigstevex4 is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:12 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com