TX WTB 1967 Bottom Seat Foam and other small parts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Jake1971 · 02-08-2015, 10:29 AM

I am searching for parts for my '71 chevy C10:
1. A bottom seat foam and blue seat cover for my '67 bench that I am using in my '71 chevy C10 Cab. Purchased from engairuph in his F/S thread. Thanks!
2. Three '68-'72 rear tail light harnesses in decent condition. Purchased from cheyenne shortstep and Wyatts Classics. Thanks!
3. Firewall pads inside the cab, under the dash, center and driver's side for my '71 chevy truck with A/C.
4. Inside mirror in very good driver quality. Purchased from DaHos. Thanks!
5. Black rubber mat, low hump.
6. Pair of hood hinges. I have the springs. Purchased from DaHos. Thanks!
7. Blue steel door panel, driver's side. Purchased from Randy teeitup's for sale thread. Thanks!
8. SBC Script valve covers. Purchased from bluek5. Thanks!
9. Blue (522?) carpet, low hump.
10. Medium blue middle seat belt.
11. Driver's and Passenger's front outer fenders, no rot.
Pictures help a lot.
Post in thread, no pm's except for payment/shipping arrangement per forum rules.
I will cover PayPal fees per forum rules.
LMK what you have shipped to 78602. I may be able to travel to pick up local.

Jake1971 · 02-09-2015, 10:11 PM

Ttt

Dads1967 · 02-10-2015, 08:59 AM

Quote:

Originally Posted by Jake1971

I am searching for:
1. A bottom seat foam and blue seat cover for my '67 bench that I am using in my '71 C10.
2. Three '68-'72 rear tail light harnesses in decent condition (hopefully unmolested) (the ones that go from the crossmember to the lights).
3. Firewall insulation pads (left and center ones)
4. Inside mirror in very good driver quality.
5. Black rubber mat and light blue (522?) carpet.
6. Pair of hood hinges. I have the springs.
7. Blue steel door panels.
Pictures help a lot.
These parts do not have to be OEM; aftermarket decent driver quality will suffice as I am not going full restoration.
Ask questions in thread, no pm's except for payment/shipping arrangement.
LMK what you have shipped to 78602. I may be able to travel to pick up local.

I have a pair of blue metal door panels $75 plus shipping. I can get pictures if you are interested.

**DaHos** · 02-10-2015, 09:20 AM

I have:
Seat foam
hood hinges
Fire wall pads (what yr are u needing?)
Rearview mirror also (what style?)

Jake1971 · 02-10-2015, 07:34 PM

Quote:

Originally Posted by Dads1967

I have a pair of blue metal door panels $75 plus shipping. I can get pictures if you are interested.

Interested. Any pitting? Pictures please.

Quote:

Originally Posted by DaHos

I have:
Seat foam
hood hinges
Fire wall pads (what yr are u needing?)
Rearview mirror also (what style?)

The bottom seat foam should fit 67-72.
Hood hinges - I have a pair but they are worn out and the hood does not close at the cowl cover (loose rivets).
Fire wall pads are for my '71 cab that am converting to factory A/C.
Rearview mirror - OEM for '71 that screws to the cab, not glued to windshield and not cloudy around the edges (mine is so bad it will not pass inspection).
Prices and pictures please.

Dads1967 · 02-10-2015, 10:34 PM

Quote:

Originally Posted by Jake1971

Interested. Any pitting? Pictures please.

The bottom seat foam should fit 67-72.
Hood hinges - I have a pair but they are worn out and the hood does not close at the cowl cover (loose rivets).
Fire wall pads are for my '71 cab that am converting to factory A/C.
Rearview mirror - OEM for '71 that screws to the cab, not glued to windshield and not cloudy around the edges (mine is so bad it will not pass inspection).
Prices and pictures please.

Here's a few pictures

Brownjacketarms · 02-11-2015, 01:36 AM

These?

Jake1971 · 02-11-2015, 07:45 PM

Quote:

Originally Posted by Dads1967

Here's a few pictures

These are the correct color. I can't tell if the screw holes are enlarged. Can I get a close up picture of the holes?

Quote:

Originally Posted by Brownjacketarms

These?

Can I get a close up picture of the screw holes?

Dads1967 · 02-11-2015, 09:41 PM

Here is a few picture of the holes. Now of them seem to be enlarged. One hole in the first picture looks like it was cut with a die grinder.

Josh

Dads1967 · 02-11-2015, 09:44 PM

Quote:

Originally Posted by Jake1971

These are the correct color. I can't tell if the screw holes are enlarged. Can I get a close up picture of the holes?

Can I get a close up picture of the screw holes?

Paul- since 1 hole has been cut with a die grinder I will take $50 for the panels plus shipping if you want them.

Josh

Brownjacketarms · 02-11-2015, 10:06 PM

Quote:

Originally Posted by Jake1971

These are the correct color. I can't tell if the screw holes are enlarged. Can I get a close up picture of the holes?

Can I get a close up picture of the screw holes?

This is what I got

Brownjacketarms · 02-11-2015, 10:07 PM

Quote:

Originally Posted by Brownjacketarms

This is what I got

Other side

Jake1971 · 02-12-2015, 07:39 PM

Quote:

Originally Posted by Dads1967

Paul- since 1 hole has been cut with a die grinder I will take $50 for the panels plus shipping if you want them.
Josh

Thank you Josh, I will pass.

**DaHos** · 02-12-2015, 07:54 PM

I got the foam down and don't feel its worth the shipping, DS is not as good as I thought. Also the rear view mirrors do have some silver spotting and I only have the heads no arms.

Best I can do ya for is a set of good hood hinges with tight studs and rivets. $50 shipped for the pair. LMK, D'

Jake1971 · 02-12-2015, 08:06 PM

Quote:

Originally Posted by DaHos

I got the foam down and don't feel its worth the shipping, DS is not as good as I thought. Also the rear view mirrors do have some silver spotting and I only have the heads no arms.

Best I can do ya for is a set of good hood hinges with tight studs and rivets. $50 shipped for the pair. LMK, D'

I have a decent mirror arm. Pictures of the heads and hinges?

Jake1971 · 02-13-2015, 09:16 PM

Ttt

**DaHos** · 02-14-2015, 12:24 PM

Hood hinges and mirror. $60 shipped for the mirror head and best pair of hinges.

Jake1971 · 02-14-2015, 07:48 PM

Quote:

Originally Posted by DaHos

Hood hinges and mirror. $60 shipped for the mirror head and best pair of hinges.

How's the other mirror head with the chrome?

**DaHos** · 02-14-2015, 08:18 PM

Quote:

Originally Posted by Jake1971

How's the other mirror head with the chrome?

There is some silver spotting on one end and the nightime lever is seized. Stainless will polish nice, rubber surround needs a good cleaning..

Jake1971 · 02-15-2015, 08:58 PM

Quote:

Originally Posted by Brownjacketarms

This is what I got

Thank you for the pictures, the holes seem to be enlarged so I will pass.

Jake1971 · 02-15-2015, 09:10 PM

Quote:

Originally Posted by DaHos

Hood hinges and mirror. $60 shipped for the mirror head and best pair of hinges.

Quote:

Originally Posted by DaHos

There is some silver spotting on one end and the night time lever is seized. Stainless will polish nice, rubber surround needs a good cleaning..

I will take your best hinges and the black mirror since the night time lever is seized. PM your PayPal?

Jake1971 · 02-18-2015, 11:13 PM

Ttt

Jake1971 · 02-20-2015, 08:32 PM

Ttt

Jake1971 · 02-20-2015, 10:53 PM

Hey DaHos, I sent payment by PayPal on 2-16-15.
Any news about shipping?

**DaHos** · 02-21-2015, 12:07 AM

Quote:

Originally Posted by Jake1971

Hey DaHos, I sent payment by PayPal on 2-16-15.
Any news about shipping?

Parts shipped and PM'ed tracking# on the 18th.

02-08-2015, 10:29 AM	#1
Jake1971 Registered User Join Date: Oct 2013 Location: Bonnerdale, AR Posts: 699	WTB 1967 Bottom Seat Foam and other small parts I am searching for parts for my '71 chevy C10: 1. A bottom seat foam and blue seat cover for my '67 bench that I am using in my '71 chevy C10 Cab. Purchased from engairuph in his F/S thread. Thanks! 2. Three '68-'72 rear tail light harnesses in decent condition. Purchased from cheyenne shortstep and Wyatts Classics. Thanks! 3. Firewall pads inside the cab, under the dash, center and driver's side for my '71 chevy truck with A/C. 4. Inside mirror in very good driver quality. Purchased from DaHos. Thanks! 5. Black rubber mat, low hump. 6. Pair of hood hinges. I have the springs. Purchased from DaHos. Thanks! 7. Blue steel door panel, driver's side. Purchased from Randy teeitup's for sale thread. Thanks! 8. SBC Script valve covers. Purchased from bluek5. Thanks! 9. Blue (522?) carpet, low hump. 10. Medium blue middle seat belt. 11. Driver's and Passenger's front outer fenders, no rot. Pictures help a lot. Post in thread, no pm's except for payment/shipping arrangement per forum rules. I will cover PayPal fees per forum rules. LMK what you have shipped to 78602. I may be able to travel to pick up local. __________________ 1971 Bone Stock C10 project "Jake" 1997 Sierra SLT factory short bed "Silver Bullet" Last edited by Jake1971; 04-14-2015 at 07:26 PM. Reason: Updates

02-09-2015, 10:11 PM	#2
Jake1971 Registered User Join Date: Oct 2013 Location: Bonnerdale, AR Posts: 699	Re: WTB 1967 Bottom Seat Foam and other small parts Ttt __________________ 1971 Bone Stock C10 project "Jake" 1997 Sierra SLT factory short bed "Silver Bullet"

02-10-2015, 09:20 AM	#4
DaHos Senior Member Join Date: Sep 2011 Location: Owosso, Michigan Posts: 2,859	Re: WTB 1967 Bottom Seat Foam and other small parts I have: Seat foam hood hinges Fire wall pads (what yr are u needing?) Rearview mirror also (what style?) __________________ 1967 C10 SWB Owner - Rustbelt Restorations

02-11-2015, 01:36 AM	#7
Brownjacketarms Registered User Join Date: Apr 2014 Location: OC CA Posts: 158	Re: WTB 1967 Bottom Seat Foam and other small parts These? Attached Images

02-11-2015, 09:41 PM	#9
Dads1967 Registered User Join Date: Apr 2014 Location: Walkerton, IN Posts: 290	Re: WTB 1967 Bottom Seat Foam and other small parts Here is a few picture of the holes. Now of them seem to be enlarged. One hole in the first picture looks like it was cut with a die grinder. Josh Attached Images

02-12-2015, 07:54 PM	#14
DaHos Senior Member Join Date: Sep 2011 Location: Owosso, Michigan Posts: 2,859	Re: WTB 1967 Bottom Seat Foam and other small parts I got the foam down and don't feel its worth the shipping, DS is not as good as I thought. Also the rear view mirrors do have some silver spotting and I only have the heads no arms. Best I can do ya for is a set of good hood hinges with tight studs and rivets. $50 shipped for the pair. LMK, D' __________________ 1967 C10 SWB Owner - Rustbelt Restorations

02-13-2015, 09:16 PM	#16
Jake1971 Registered User Join Date: Oct 2013 Location: Bonnerdale, AR Posts: 699	Re: WTB 1967 Bottom Seat Foam and other small parts Ttt __________________ 1971 Bone Stock C10 project "Jake" 1997 Sierra SLT factory short bed "Silver Bullet"

02-14-2015, 12:24 PM	#17
DaHos Senior Member Join Date: Sep 2011 Location: Owosso, Michigan Posts: 2,859	Re: WTB 1967 Bottom Seat Foam and other small parts Hood hinges and mirror. $60 shipped for the mirror head and best pair of hinges. Attached Images __________________ 1967 C10 SWB Owner - Rustbelt Restorations

02-18-2015, 11:13 PM	#22
Jake1971 Registered User Join Date: Oct 2013 Location: Bonnerdale, AR Posts: 699	Re: WTB 1967 Bottom Seat Foam and other small parts Ttt __________________ 1971 Bone Stock C10 project "Jake" 1997 Sierra SLT factory short bed "Silver Bullet"

02-20-2015, 08:32 PM	#23
Jake1971 Registered User Join Date: Oct 2013 Location: Bonnerdale, AR Posts: 699	Re: WTB 1967 Bottom Seat Foam and other small parts Ttt __________________ 1971 Bone Stock C10 project "Jake" 1997 Sierra SLT factory short bed "Silver Bullet"

02-20-2015, 10:53 PM	#24
Jake1971 Registered User Join Date: Oct 2013 Location: Bonnerdale, AR Posts: 699	Re: WTB 1967 Bottom Seat Foam and other small parts Hey DaHos, I sent payment by PayPal on 2-16-15. Any news about shipping? __________________ 1971 Bone Stock C10 project "Jake" 1997 Sierra SLT factory short bed "Silver Bullet"



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.