Fan shroud/Radiator mount Question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**IronCanine** · 03-22-2015, 04:12 PM

Reinstalling my radiator and fan shroud. Please note part #7 in attached Assembly Manual pic. I am missing this component. I don't see how it works with the shroud clips in place. Is it an either/or situation? Since I have clips, would I not have that piece? Or has this part been lost somewhere along the way? Any guidance (especially with pics) appreciated. 1970 4WD.

Thanks...

Brad

hemi43 · 03-22-2015, 10:46 PM

I'll check mine tomorrow. BTW, which manual did you use to get that diagram. I'm looking for a body manual but not sure which one to get.
Dan

hemi43 · 03-22-2015, 10:59 PM

Here ya go !! Looks like mine is missing too. I have a feeling it's just a rubber seal to keep debris from getting sucked in by the fan. It looks thick in the drawing, but may have been made from thin rubber. IMO

**Steven B** · 03-23-2015, 11:03 AM

The only time I have seen part #7 was on a BB 2wd radiator shroud. Mine was on a Longhorn.

**IronCanine** · 03-23-2015, 03:10 PM

Thanks to you both...a picture is worth a thousand words as they say. Feel better about my set up now.

72K5CSTDarkOlive · 03-23-2015, 04:56 PM

I'll post a pic later tonight of the clip that I pulled off my shroud to see if that helps

03-22-2015, 04:12 PM	#1
IronCanine I'm trying.... Join Date: Oct 2013 Location: Athens, GA Posts: 2,746	Fan shroud/Radiator mount Question Reinstalling my radiator and fan shroud. Please note part #7 in attached Assembly Manual pic. I am missing this component. I don't see how it works with the shroud clips in place. Is it an either/or situation? Since I have clips, would I not have that piece? Or has this part been lost somewhere along the way? Any guidance (especially with pics) appreciated. 1970 4WD. Thanks... Brad Attached Images __________________ 1970 K20 Z62 https://67-72chevytrucks.com/vboard/...56#post9334756 1970 Blazer http://67-72chevytrucks.com/vboard/s...d.php?t=645076 1969 K10 SWB CST http://67-72chevytrucks.com/vboard/s...52#post8520352 1971 K20 Z84 https://67-72chevytrucks.com/vboard/...90#post9047290 1946 B.F. Avery Model A Tractor http://67-72chevytrucks.com/vboard/s...55#post8292555 "Sometimes I wonder if zander208 was even real..."

03-22-2015, 10:46 PM	#2
hemi43 Registered User Join Date: Mar 2015 Location: Ontario Canada Posts: 1,526	Re: Fan shroud/Radiator mount Question I'll check mine tomorrow. BTW, which manual did you use to get that diagram. I'm looking for a body manual but not sure which one to get. Dan

03-22-2015, 10:59 PM	#3
hemi43 Registered User Join Date: Mar 2015 Location: Ontario Canada Posts: 1,526	Re: Fan shroud/Radiator mount Question Here ya go !! Looks like mine is missing too. I have a feeling it's just a rubber seal to keep debris from getting sucked in by the fan. It looks thick in the drawing, but may have been made from thin rubber. IMO Attached Images

03-23-2015, 11:03 AM	#4
Steven B Senior Member Join Date: Jan 2000 Location: LHC, AZ Posts: 385	Re: Fan shroud/Radiator mount Question The only time I have seen part #7 was on a BB 2wd radiator shroud. Mine was on a Longhorn. __________________ 70 Jimmy 4x4 71 GMC 2500 Too bad stupidity isn't painful

03-23-2015, 03:10 PM	#5
IronCanine I'm trying.... Join Date: Oct 2013 Location: Athens, GA Posts: 2,746	Re: Fan shroud/Radiator mount Question Thanks to you both...a picture is worth a thousand words as they say. Feel better about my set up now. __________________ 1970 K20 Z62 https://67-72chevytrucks.com/vboard/...56#post9334756 1970 Blazer http://67-72chevytrucks.com/vboard/s...d.php?t=645076 1969 K10 SWB CST http://67-72chevytrucks.com/vboard/s...52#post8520352 1971 K20 Z84 https://67-72chevytrucks.com/vboard/...90#post9047290 1946 B.F. Avery Model A Tractor http://67-72chevytrucks.com/vboard/s...55#post8292555 "Sometimes I wonder if zander208 was even real..."

03-23-2015, 04:56 PM	#6
72K5CSTDarkOlive Registered User Join Date: Aug 2013 Location: Central Coast, CA Posts: 774	Re: Fan shroud/Radiator mount Question I'll post a pic later tonight of the clip that I pulled off my shroud to see if that helps __________________ My Build Thread 72 K5 http://67-72chevytrucks.com/vboard/s...d.php?t=628612 Build version 2.0: 72 K5 6.0 LQ9, 4L80e, NP205 http://67-72chevytrucks.com/vboard/s...d.php?t=793192 ____________________________________________ 1972 CST K5 Blazer Dark Olive



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.