new toys on the way! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ocbaud · 02-06-2004, 01:17 AM

polished alum. valve covers

polished alum. timing chain cover

starter 555-10001

waterpump 925-8240

toys toys toys!

low 84 · 02-06-2004, 02:36 AM

nice

but wow, why the expensive starter? your not running 13:1 cr are you?

if you haven't already placed the order i would go to the parts store and buy one with a lifetime warretee. works fine on mine

79BIG10 · 02-06-2004, 03:44 AM

Those valve covers you are going to love. I've got the centerbolt style.

On the starter I'm with Ryan. I'm running 10:1 compression on mine and with a lifetime starter as well. No problems at all (knock on wood).

78SilveradoSWB · 02-06-2004, 04:57 AM

Don't forget to order a new timing pointer to go with the new timing cover.

Why not get a mini-hi-tork starter? They are smaller and not prone to heat soak from your headers.

ocbaud · 02-06-2004, 09:53 AM

i was gonna get a stock style starter for cheaper, but my dad thought i should get a better higher end starter, so he paid for some of it

LOHRTBT · 02-06-2004, 11:22 AM

cOOL... its gonna look nice man!

MylilBowTie · 02-06-2004, 12:32 PM

Not to pick and complain but I would have gotten a Stewart water pump. Stage 1 at least if not stage 2.

79Silv4x4 · 02-06-2004, 04:11 PM

the only thing that i would change would be chrome rather than polished aluminum--that sh!t is tough to maintain.

Low87 · 02-06-2004, 06:37 PM

Quote:

Originally posted by 79Silv4x4
the only thing that i would change would be chrome rather than polished aluminum--that sh!t is tough to maintain.

I'm with you. Eric, polished engine components on a driver are going to be more of a biotch than Dave.

79BIG10 · 02-06-2004, 06:54 PM

Quote:

Originally posted by Low87

I'm with you. Eric, polished engine components on a driver are going to be more of a biotch than Dave.

LMAO!! But to Dave ( aka ANAL ANDY ) it's nothing at all. Remember the grease stains we got on his carpet in the garage from working on Jon's truck? He was out after it with B-12 before we could get the truck out of the garage!!

BTW: Dave's truck is clean only because he's cheating on it with the Trans AM

:p

Blue Beard · 02-07-2004, 12:11 AM

New toys.........don't you know Christmas is past..........

C&C Chevy · 02-07-2004, 01:42 AM

Eric, sweet lookin parts. Can't wait to see the engine come together.

As far as the "keepin it clean" problem. Couldn't Eric just shoot a couple coats of clear on them valve covers.

*1FaastC10* · 02-07-2004, 03:08 AM

Quote:

Originally posted by low 84
nice but wow, why the expensive starter? your not running 13:1 cr are you? if you haven't already placed the order i would go to the parts store and buy one with a lifetime warretee. works fine on mine

Quote:

from www.jegs.com
Our Prostarter Starters are built with full, ball bearing construction, instead of bushings that can prematurely wear out. Weighs only 10.5 pounds. Billet aluminum adapters feature up to 4 [b]adjustable mounting positions (except 555-10002 and 555-10010) allowing more header or oil pan clearance. 4.41:1 gear reduction[/b (others offer 3:1) with cranking power for engines that have as much as 15:1 compression. 80-90 Amp draw. Aluminum solenoid housing is sealed with O-rings for added protection. GM starters come with bolts and shims.

sounds like its got quite a few advantages over the stock reman unit to me.

ocbaud · 02-07-2004, 03:13 AM

all the stuff should be here tuesday.

list is getting shorter by the day

to get:
headers
carb
distributor
alternator
fuel pump
electric fans
misc. little things

02-06-2004, 01:17 AM	#1
ocbaud Garage Queen Material Join Date: Oct 2002 Location: USA Posts: 4,129	new toys on the way! polished alum. valve covers polished alum. timing chain cover starter 555-10001 waterpump 925-8240 toys toys toys!

02-06-2004, 02:36 AM	#2
low 84 Registered User Join Date: Jan 2002 Location: Houston, TX Posts: 2,144	nice but wow, why the expensive starter? your not running 13:1 cr are you? if you haven't already placed the order i would go to the parts store and buy one with a lifetime warretee. works fine on mine __________________ '51 F100, backhalf with a narrowed 9 and coil overs, 18.5" mickeys, monte front clip, +400" sbc in the works '05 1500 Crew Cab RIP '84 swb 5/7 drop, solid cammed 408 w/ fully ported dart heads, th350 w/ 10 inch hughes, 12 bolt w/ 3.73 richmonds and a locker '80 swb 4x4 in progress: 7" lift, 350 th350/np205, d44 and 1.5" ORD tie rod, 14BFF w/discs , armored diff covers, 40" MTR's

02-06-2004, 03:44 AM	#3
79BIG10 I'm back with 2nd truck! Join Date: Feb 2002 Location: Texas Posts: 3,775	Those valve covers you are going to love. I've got the centerbolt style. On the starter I'm with Ryan. I'm running 10:1 compression on mine and with a lifetime starter as well. No problems at all (knock on wood). __________________ 1979 Chevrolet Bonanza Big10 "Tootsie Roll" 1985 Chevrolet Silverado (wife's) Member of the Southern Bowties Club "Don't underestimate how sexy a fat man who drinks to excess can be." Homer Simpson

02-06-2004, 04:57 AM	#4
78SilveradoSWB Senior Member Join Date: Apr 2002 Location: Beaverton, OR Posts: 1,615	Don't forget to order a new timing pointer to go with the new timing cover. Why not get a mini-hi-tork starter? They are smaller and not prone to heat soak from your headers. __________________ Mitch 1978 Chevrolet Silverado C 10 454 BB, TH400

02-06-2004, 11:22 AM	#6
LOHRTBT BeWarE tHe eViL CrAnkTOe! Join Date: Oct 2002 Location: Yukon, OK Posts: 3,605	cOOL... its gonna look nice man! __________________ ~Dave~ You can call me Mike, Mike Oxlong - 1986 Chevy SWB - Stock for now - *1986 Chevy Custom SWB* *Stolen 6/26/05* - 1985 Chevy SWB SOLD - 1999 T/A Some mods www.cardomain.com/id/ramairdave AIM Screenname - Jester84

02-06-2004, 09:53 AM	#5
ocbaud Garage Queen Material Join Date: Oct 2002 Location: USA Posts: 4,129	i was gonna get a stock style starter for cheaper, but my dad thought i should get a better higher end starter, so he paid for some of it

02-06-2004, 12:32 PM	#7
MylilBowTie Right turn Clyde Join Date: Nov 2002 Location: Cincinnati, Ohio Posts: 2,911	Not to pick and complain but I would have gotten a Stewart water pump. Stage 1 at least if not stage 2. __________________ 1974 C25 LWB: 454 4bbl Carb / TH400 / 3.73 1992 Camaro RS 305 TBI

02-06-2004, 04:11 PM	#8
79Silv4x4 Workaholic Join Date: Oct 2002 Location: Katy, TX Posts: 1,589	the only thing that i would change would be chrome rather than polished aluminum--that sh!t is tough to maintain.

02-07-2004, 12:11 AM	#11
Blue Beard Registered User Join Date: Jan 2003 Location: Washington State Posts: 8,834	New toys.........don't you know Christmas is past.......... __________________ 1970 Chev CST 2003 Harley Fatboy 1975 Chevrolet Step Van 1956 Chev Bel Air 1977 Blazer 2WD For Sale $3000.00 1978 Blazer 2WD For Sale $7000.00 1978 Silverado 2005 Monte Carlo

02-07-2004, 01:42 AM	#12
C&C Chevy Registered User Join Date: Feb 2003 Location: Midwest City, OK Posts: 1,001	Eric, sweet lookin parts. Can't wait to see the engine come together. As far as the "keepin it clean" problem. Couldn't Eric just shoot a couple coats of clear on them valve covers. __________________ Robert Current: 1986 SWB Silverado 4.3 / TH400 Past: 1985 SWB Silverado 305 / TH350 - sold 1995 1987 1/2 ton Silverado - FI 350 / 700R4 sold 2007

02-07-2004, 03:13 AM	#14
ocbaud Garage Queen Material Join Date: Oct 2002 Location: USA Posts: 4,129	all the stuff should be here tuesday. list is getting shorter by the day to get: headers carb distributor alternator fuel pump electric fans misc. little things



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.