OR 1972 C10 Parting

[hdff]

Originally Posted by DLTruck1973

Hi Keith,

The trim on this thread is cab forward and upper belt trim. I do have the box side trim from another truck that is for a 127 inch wheel base bed. I would sell the two bed pieces (left and right) for $30.00 each so the complete set of upper belt trim is $150.00 plus the shipping. This would ship in a tube to prevent damage.

I will get you a quote on everything else other than the trim.

Thank you,
Thomas

ok I think i'll pass on the belt trim for now but thanks.
but let me know the shipping and payment method on the rest of the stuff.........

[DLTruck1973]

Originally Posted by hdff

ok I think i'll pass on the belt trim for now but thanks.
but let me know the shipping and payment method on the rest of the stuff.........

PM on the way with total and payment information.

Thank you,
Thomas

[kingstrider]

Originally Posted by DLTruck1973

Here are photos of the wiper arms and the best set of lenses I have currently. These lenses are $15.00 each and are nice for a driver, no cracks and decent color.

Let me know and I will get you a shipping quote with your zip code.

Thank you,
Thomas

I'll pass on the wiper arms but I will take those other lenses for sure! What do the housings look like? Shipping will be to 20871. Thank you!

[tll74]

Chevy's rule

[DLTruck1973]

Originally Posted by uaengineer

That's good. I'm interested in the other set of door panels. Just send me a price and pic when you get time. I also posted on the heat stove post if you want to combine.

For the visors and heat stove, the total with shipping will be $95.00.

Let me know and I will send you a PM with payment information.

Thank you very much,
Thomas

[TBONE1964]

Originally Posted by tll74

Chevy's rule

I second that

[DLTruck1973]

Originally Posted by kingstrider

I'll pass on the wiper arms but I will take those other lenses for sure! What do the housings look like? Shipping will be to 20871. Thank you!

I can set you up with a nice decent set of usable housings with no stripped out holes and good pig tails at $12.50 each. You want the good $15.00 each lenses, correct? I can ship all for $13.00 so your total will be $68.00.

Let me know and I can PM you payment information.

Thank you,
Thomas

[DLTruck1973]

Originally Posted by 1adam12

I would like the fan shroud shipped to 95206 is there 2 of them?

The fan shroud will be $45.00 plus $25.50 shipping to your zip code for a total of $70.50.

I do have another small block no air shroud in the same nice condition.

Let me know and I can send you a PM with payment information.

Thank you,
Thomas

[DLTruck1973]

Originally Posted by 46stude

Need the LH (drivers) upper door trim & both parking light lenses. Shipping to 78382?

$40 for the parts and $33.00 for shipping so $73.00 total.

I pack the trim very well to prevent damage in shipping. It will be two packages.

Let me know and I will send PM with payment information.

Thank you,
Thomas

[Mr Handy]

brake/clutch pedal assembly...$ 45.00
2wd 4 speed (SM465) floor hump...$ 35.00
4 speed (SM465) shift handle with boot and ring and handle, very minor tear in boot, under fold...$ 40.00
complete clutch pedal linkage from clutch pedal to throw out fork, including the frame bracket and return spring...$65.00
clutch/brake pedal stop bracket...$ 10.00
steering column, black for 4 speed, decent driver condition...$85.00
Complete drive line with center bearing bracket for 127 inch wheel base, small block with SM465 trans. Comes with bracket for cross member...$ 75.00
1 small block 4 speed transmission cross members nice and clean...$ 65.00

Zip for business address is 34677

[DLTruck1973]

Originally Posted by Mr Handy

brake/clutch pedal assembly...$ 45.00
2wd 4 speed (SM465) floor hump...$ 35.00
4 speed (SM465) shift handle with boot and ring and handle, very minor tear in boot, under fold...$ 40.00
complete clutch pedal linkage from clutch pedal to throw out fork, including the frame bracket and return spring...$65.00
clutch/brake pedal stop bracket...$ 10.00
steering column, black for 4 speed, decent driver condition...$85.00
Complete drive line with center bearing bracket for 127 inch wheel base, small block with SM465 trans. Comes with bracket for cross member...$ 75.00
1 small block 4 speed transmission cross members nice and clean...$ 65.00

Zip for business address is 34677

Ok, I will work on shipping quote. May be Monday before I can get it worked up. 34677 to a business, correct?

I will check freight with a pallet and UPS with multiple packages and see which is more economical for you.

I will get back with you soon,.

Thank you,
Thomas

[chastain90]

Originally Posted by DLTruck1973

The bow tie is pending. I can send the inner door handles and window cranks for $7.00 shipping so $37.00 total. Let me know and I will send you payment information on a PM.

Thank you,
Thomas

Ok I will wait to see if bowtie gets taken but sounds good on the handles.

[DLTruck1973]

Originally Posted by Mr Handy

brake/clutch pedal assembly...$ 45.00
2wd 4 speed (SM465) floor hump...$ 35.00
4 speed (SM465) shift handle with boot and ring and handle, very minor tear in boot, under fold...$ 40.00
complete clutch pedal linkage from clutch pedal to throw out fork, including the frame bracket and return spring...$65.00
clutch/brake pedal stop bracket...$ 10.00
steering column, black for 4 speed, decent driver condition...$85.00
Complete drive line with center bearing bracket for 127 inch wheel base, small block with SM465 trans. Comes with bracket for cross member...$ 75.00
1 small block 4 speed transmission cross members nice and clean...$ 65.00

Zip for business address is 34677

OK, I did some work here and got you a shipping quote for both UPS and freight.

I can do everything UPS in multiple packages for packages for $135.00. Freight came out to be $235.00.

The parts total came to $410 but we can give you everything for $400.00 even. The grand total with shipping is $535.00 UPS or add $100.00 if you wanted it freight shipped.

I can get this ready to go on Monday for you., Send me a PM and I will give you payment information if interested.

Thank you,
Thomas

[46stude]

Originally Posted by DLTruck1973

$40 for the parts and $33.00 for shipping so $73.00 total.

I pack the trim very well to prevent damage in shipping. It will be two packages.

Let me know and I will send PM with payment information.

Thank you,
Thomas

Good used is better than cheap repro, right? lol

I'll take the parts. Send me a PM w/ info for mailing a Postal MO.

[Nick92087]

Do you still have all the parts for the IFS?

[DLTruck1973]

Originally Posted by 46stude

Good used is better than cheap repro, right? lol

I'll take the parts. Send me a PM w/ info for mailing a Postal MO.

PM on the way.

Thank you,
Thomas

[DLTruck1973]

Originally Posted by Nick92087

Do you still have all the parts for the IFS?

"
Complete disc brake conversion, includes, cross member, coils, upper and lower control arms, spindles, rotors with bearings, dust shields, calipers, idler arm, inner and outer tie rods. Center link not in the photo but will make one available with the sale...$ 250.00"

Yes this is still available.

Thank you,
Thomas

[hdff]

Originally Posted by DLTruck1973

PM on the way with total and payment information.

Thank you,
Thomas

payment sent by paypal for the air cleaner, spacer,bow tie and cranks

Originally Posted by DLTruck1973

Hi Keith,

The trim on this thread is cab forward and upper belt trim. I do have the box side trim from another truck that is for a 127 inch wheel base bed. I would sell the two bed pieces (left and right) for $30.00 each so the complete set of upper belt trim is $150.00 plus the shipping. This would ship in a tube to prevent damage.

I will get you a quote on everything else other than the trim.

Thank you,
Thomas

still got this trim on my mind, but isn't 127" for a long bed? I have a short bed

[Chevy Fan Always]

Originally Posted by DLTruck1973

Manifold will be $125.00 plus $40.00 to ship, so total is $165.00.

Here are some photos with the part numbers.

Thank you,
Thomas

Sorry to keep bothering you, do you know if the heat shield ( i found on) will work with those injector bumps on the manifold? I want to wait just a little longer till I find out for sure. And do you know what shipping on the sway bar would be to 44805?

Mike Wilson

[DLTruck1973]

Originally Posted by Chevy Fan Always

Sorry to keep bothering you, do you know if the heat shield ( i found on) will work with those injector bumps on the manifold? I want to wait just a little longer till I find out for sure. And do you know what shipping on the sway bar would be to 44805?

Mike Wilson

Hi Mike,

http://67-72chevytrucks.com/vboard/s...d.php?t=670605

This heat stove is the one that goes with the manifolds I am selling. Both are correct for a 72 C10 from the factory. The heat stove in the link is sold pending payment but should give you a reference to what is correct. I have seen these heat stoves with holes for the injector tubes before but not sure if you need one with holes to run the manifolds. Also when looking for a heat stove, remember that 2wd and 4wd heat stoves are different.

Hope this helps,
Thomas

[DLTruck1973]

Originally Posted by hdff

payment sent by paypal for the air cleaner, spacer,bow tie and cranks



still got this trim on my mind, but isn't 127" for a long bed? I have a short bed

Hi Keith, yes the trim I have is for a long bed but it can be cut down which is what a lot of people do as the short bed trim is so much harder to find. You would be cutting 12 inches off the rear side of it to make it work for a 115 inch wheel base truck.

I also received your payment for the other parts and will ship on Monday.

Let me know and thank you,
Thomas

[kingstrider]

Originally Posted by DLTruck1973

I can set you up with a nice decent set of usable housings with no stripped out holes and good pig tails at $12.50 each. You want the good $15.00 each lenses, correct? I can ship all for $13.00 so your total will be $68.00.

Let me know and I can PM you payment information.

Thank you,
Thomas

Thanks Thomas, that works and yes I want the good lenses. Send me a PM and we'll go from there.
John

[Chevy Fan Always]

Originally Posted by DLTruck1973

Hi Mike,

Complete sway bare with frame brackets is $50.00 plus shipping.

Let me know.

Thank you,
Thomas

I will take the manifolds. if I take the sway bar what would the total be for sipping with it added?

44805
Mike

[DLTruck1973]

Originally Posted by kingstrider

Thanks Thomas, that works and yes I want the good lenses. Send me a PM and we'll go from there.
John

PM sent,

Thank you,
Thomas

[DLTruck1973]

Originally Posted by Chevy Fan Always

I will take the manifolds. if I take the sway bar what would the total be for sipping with it added?

44805
Mike

Hi Mike,

I will figure out a shipping quote for everything on Monday. It may be better in two packages but I will let you know for sure.

Thank you very much,
Thomas