![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Registered User
Join Date: May 2014
Location: Mobile, AL
Posts: 422
|
Anybody ever made a uh....shlong bed? Fleet side between a short and long bed.
Just wondering if anyone has made a fleet side longbed a little shorter? Short beds aren't my taste and long beds are a little too long. I believe the normāl cut down method is 8 under cab and 12 off rear. I'm thinking maybe 4 under cab and 6 off rear. Center the wheels. Anybody ever done it? Custom drive shafts are pretty cheap. Any reason this wouldn't work? Feel feel to tell me if I'm missing something obvious here! A pic would be awesome.
|
![]() |
![]() |
![]() |
#2 |
Senior Member
Join Date: Sep 2004
Location: Wakaw, Sask, Canada
Posts: 3,180
|
Re: Anybody ever made a uh....shlong bed? Fleet side between a short and long bed.
Thats a very interesting idea, actually.
__________________
"You can take the man out of PA, but you can't take PA out of the man" |
![]() |
![]() |
![]() |
#3 |
Senior Member
![]() Join Date: Feb 2002
Location: Tucson, AZ USA
Posts: 7,271
|
Re: Anybody ever made a uh....shlong bed? Fleet side between a short and long bed.
I'm sure I saw a stretch-Blazer once. It was about 120 -127" in wheelbase, had fleetsides and a skillfully intermeshed removable cap. The tell was the jc whitney van porthole window near the rear, aft of the usual trapezoidal side window. A buddy who grew up in Detroit said he saw one there and it was called "The Cheyenne''. He thought it was a production model, but insider GM sources have denied the possibility. Maybe just a 'custom' or one-off.
I've also seen "Trazers" -- Blazer-short bed but a separate cab from the bed. About 109 -105" wheelbase. Usually no top. I even saw a "Twuk" once, with a shortened stepside bed on a 105" [or shorter] K/5 frame. Painted daisy yellow, with a "Tweety Bird" decal in the '67 small rear window. I think it's a local junkyard's pet project. It would not be much harder to splice the frame rails to whatever length you want, but when you move the frame dimensions to other than factory lengths, you compound your body work tasks. The longer the frame, the more stability at higher speeds, especially for towing. The shorter the length, the more manueverability in tight spaces like dodgy rock trails or dense urban streets. Also a lighter weight rig, but still a platform for a full-sized engine.
__________________
Every 25 years I like to rebuild that 292, whether it needs it or not. Last edited by '68OrangeSunshine; 05-16-2015 at 05:49 AM. |
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Aug 2012
Location: tucson,az
Posts: 274
|
Re: Anybody ever made a uh....shlong bed? Fleet side between a short and long bed.
I think a few people have done a 7 foot bed. looks good actualy.
someone on here has done it. bpatrol |
![]() |
![]() |
![]() |
#5 |
Registered User
Join Date: May 2014
Location: Mobile, AL
Posts: 422
|
Re: Anybody ever made a uh....shlong bed? Fleet side between a short and long bed.
Thanks guys, I'm still looking but haven't seen any 67-72s. I saw an older one, I think it was a 66. I think I'm gonna go with a 7 footer but I'll keep researching as it will be a while before I can get started. Got finals Monday then I graduate and get to find a job where I can make some decent money and get out of this damn rental and buy a place with a garage. Can't wait! I'm so tired of digging around in a gravel/mud driveway looking for dropped bolts lmao. Anybody who's been in this situation knows what I'm talking about!
|
![]() |
![]() |
![]() |
#6 |
Registered User
Join Date: Feb 2011
Location: Modesto, CA
Posts: 2,188
|
Re: Anybody ever made a uh....shlong bed? Fleet side between a short and long bed.
There's no reason it couldn't be done. I'd put it in photoshop and do some visuals before I committed to cutting it up. I've seen some trucks with only the front half of the bed lopped off and asthetically it's very obvious something is askew. It'd be interesting to see a medium bed truck. Best of luck!
|
![]() |
![]() |
![]() |
#7 |
Registered User
Join Date: May 2014
Location: Mobile, AL
Posts: 422
|
Re: Anybody ever made a uh....shlong bed? Fleet side between a short and long bed.
Yea I know what you mean. I won't be just cutting off the front of the bed, the better cut downs I have seen they have taken sections out of the front and rear, then centered the wheel well. I think a bed cut down would actually work better when your only taking a foot out too, only problem being that I've never seen it before ānd might have to figure it out myself. I figure worse case scenario it ends up as a short bed and could end up needing to buy a new bed. Good thing is I've got lots of time to plan as I'm waiting till I move.
|
![]() |
![]() |
![]() |
#8 |
Registered User
Join Date: Aug 2012
Location: Ringgold GA
Posts: 149
|
Re: Anybody ever made a uh....shlong bed? Fleet side between a short and long bed.
The flatbed I just built for my 67 is 7'
__________________
67 C10 swb bored out 350 granny 4 speed I come from a long line of moonshiners |
![]() |
![]() |
![]() |
#9 |
Registered User
Join Date: Dec 2007
Location: Nanaimo B.C.
Posts: 604
|
Re: Anybody ever made a uh....shlong bed? Fleet side between a short and long bed.
I took 12" out of the front the box
__________________
I was hooked on these trucks since 1982 when I drove my budys fathers 1968 Custum GMC 396 automatic dana 60 rear with a power lock diff what a ride more fun then we will we can ever tell!! |
![]() |
![]() |
![]() |
#10 |
Registered User
Join Date: Dec 2007
Location: Nanaimo B.C.
Posts: 604
|
Re: Anybody ever made a uh....shlong bed? Fleet side between a short and long bed.
one more
__________________
I was hooked on these trucks since 1982 when I drove my budys fathers 1968 Custum GMC 396 automatic dana 60 rear with a power lock diff what a ride more fun then we will we can ever tell!! |
![]() |
![]() |
![]() |
#11 |
Account Suspended
![]() Join Date: Aug 2005
Location: Southern UT
Posts: 906
|
Re: Anybody ever made a uh....shlong bed? Fleet side between a short and long bed.
A few years ago there was one on here that had the long bed chopped in the back. Then you only have to bob the back to the bed and the ends of the frame. IMHO the proportions were out of whack.
|
![]() |
![]() |
![]() |
#12 |
Registered User
Join Date: May 2014
Location: Mobile, AL
Posts: 422
|
![]()
Thanks for the pic willys! I really like the length of that bed. I think I will try to get my wheels a little further back. That's a nice truck though and after seeing that pic I really think a 7 footer is the way to go.
|
![]() |
![]() |
![]() |
#13 |
Senior Member
Join Date: Sep 2004
Location: Wakaw, Sask, Canada
Posts: 3,180
|
Re: Anybody ever made a uh....shlong bed? Fleet side between a short and long bed.
I have always wondered why the rear wheels arent centered in the opening on 67-72s...GM obviously thought it was a good idea.
__________________
"You can take the man out of PA, but you can't take PA out of the man" |
![]() |
![]() |
![]() |
#14 |
Registered User
Join Date: May 2014
Location: Mobile, AL
Posts: 422
|
Re: Anybody ever made a uh....shlong bed? Fleet side between a short and long bed.
Yea bugs me too, I don't get it! Wonder if they had a reason, can't imagine what it would be.
|
![]() |
![]() |
![]() |
#15 | |
The Older Generation
![]() ![]() ![]() Join Date: Aug 2006
Location: Montezuma, Iowa
Posts: 25,491
|
Re: Anybody ever made a uh....shlong bed? Fleet side between a short and long bed.
Quote:
You are backwards on your figures. Normal to make a short bed is 12" under the cab and 8" off the rear.... LockDoc
__________________
Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 - |
|
![]() |
![]() |
![]() |
#16 |
Cruzin
Join Date: Dec 2009
Location: on the road
Posts: 2,835
|
Re: Anybody ever made a uh....shlong bed? Fleet side between a short and long bed.
I've seen some photoshops of it and really like it. Comes up on here time to time, I like being different.
__________________
Lime Wife's 67https://www.google.com/url?sa=t&rct=...wZEMODaS2d94u8 Back to the Fifties 59 https://www.google.com/url?sa=t&rct=...NAeStpydfrcj_U Proverbs 3:5,6 "Thanks to the Interstate Highway System, it is now possible to travel across the country from coast to coast without seeing anything."Charles Kuralt In memory of our first baby daughter, daddy and mommy love you. Danica Grace 6/26/14
|
![]() |
![]() |
![]() |
#17 |
Registered User
Join Date: May 2014
Location: Mobile, AL
Posts: 422
|
![]()
Thanks doc, that could of ended bad! Jk sometimes I ramble, I'll make sure I get it figured out and it'll be down on paper before a ever pic up a tool . At this point I'm in the pre-research stage where I'm just shooting the sheet lol. I always spreciate advice though.
|
![]() |
![]() |
![]() |
Bookmarks |
|
|