|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
06-02-2015, 05:56 PM
|
#1 |
|
Registered User
 
Join Date: May 2012
Location: Anton, Texas
Posts: 2,364
|
Inline 6 292 a/c bracket
I have been ask by a few members about an a/c bracket that I made for my 292 six , hope these pic's help kinda gives the size and shape of the bracket. the smaller the dist. the lower you can make the bracket. the slots on the top bracket is so the compressor belt can adjust, or you could mount a idler pulley some where if you wanted to , ole dollor is gone and I cant take any new pic's , this is what I have found so far , hope it helps... Don
two brackets bolt to the side of the head between the spark plugs. top plate welded to them , and gussets from the top to the side brackets , slots cut in the top bracket to slide the sanden compressor to tighten the a/c belt, 4L brackets to hold the compressor to the top mount ..... |
|
|
|
06-02-2015, 07:10 PM
|
#2 |
|
Senior Member
Join Date: Feb 2002
Location: Tucson, AZ USA
Posts: 7,436
|
Re: Inline 6 292 a/c bracket
Sorry to hear Ole Dollar is gone.
Thanks for the bracket ideas.
__________________
Every 25 years I like to rebuild that 292, whether it needs it or not. |
|
|
|
|
06-02-2015, 07:30 PM
|
#3 | |
|
Registered User
Join Date: May 2012
Location: Anton, Texas
Posts: 2,364
|
Re: Inline 6 292 a/c bracket
Quote:
|
|
|
|
|
|
06-02-2015, 09:30 PM
|
#4 |
|
Registered User
Join Date: Sep 2013
Location: Gonzales, La
Posts: 1,441
|
Re: Inline 6 292 a/c bracket
Much appreciate the photos and info you've provided for myself. Thanks again Ol Dollor.
__________________
MyToys: Goldilocks the "Ol School Survivor" 1968 C10, SWB Stepside, 08/15 TOTM, 250 CI 6 cylinder, 3 on the tree, 3.73 rear, 3/5 static drop, 23,500 original miles. Samson the 1970 CST10, LWB, 462Ci, Turbo 350 tranny, 3.08 rear gear, PB, PS, A/C, AM/FM, 2/4 Drop. Brutus the 1998 Camaro Z28, 33,500 original miles, LS1, 519 RWHP/497 RWTQ. Member of the Louisiana Classic Truck Club, LCTC Member of the Louisiana C10 Club Member of the Baton Rouge Drifters Car Club |
|
|
|
|
06-02-2015, 10:49 PM
|
#5 | |
|
Registered User
Join Date: May 2012
Location: Anton, Texas
Posts: 2,364
|
Re: Inline 6 292 a/c bracket
Quote:
|
|
|
|
|
|
06-03-2015, 05:21 PM
|
#6 |
|
Registered User
Join Date: Feb 2012
Location: So. Cali.
Posts: 2,656
|
Inline 6 194/230/250/292 A/C bracket
Thanx ! .
I don't know how to weld & I'm a messy Fabricator so I'd like to find some for my truck . Is that a Sanden series 5 or 7 compressor ? . Please keep the photos and ideas coming ! . FWIW , my '69 C/10 has the extended ATF & Engine Oil dipsticks from a G Series Van that come all the way forward to the radiator so there's clearance issues , I know these vans were sold with AC so I'm hoping to find a set some where , I don't mind taking them off the junker in the Desert..... (hint) . TIA ,
__________________
-Nate Geezer '49 3100 235 W/ Muncie SM420 SOLD '69 C/10 shortbed sidemount survivor 250 L6 W/ 350TH 
|
|
|
|
|
06-03-2015, 06:21 PM
|
#7 | |
|
Registered User
Join Date: May 2012
Location: Anton, Texas
Posts: 2,364
|
Re: Inline 6 194/230/250/292 A/C bracket
Quote:
|
|
|
|
|
|
| Bookmarks |
|
|
Linear Mode
