TX Parting out a 69 longbed truck

[ekgguy]

Originally Posted by HSRACER

It is looking more and more like I will be parting out the other truck. You can come see it on the 4th of July if you like to know if it is better than yours.

PM Sent

[CAJ1971]

I'm looking for all the linkage for 3 on tree if you have it.

[HSRACER]

Originally Posted by CAJ1971

I'm looking for all the linkage for 3 on tree if you have it.

I do have those. 65 plus shipping for the 2 rods with the special adjusting nuts on the ends. Is there any other pieces you need?

[CAJ1971]

Originally Posted by HSRACER

I do have those. 65 plus shipping for the 2 rods with the special adjusting nuts on the ends. Is there any other pieces you need?

Actually I bumped my head for a second. I don't need the linkage for the shifting. I need everything for the clutch linkage besides the pedal and fork. My shifter has been relocated to the floor. Sorry for the confusion.
Posted via Mobile Device

[HSRACER]

Originally Posted by CAJ1971

Actually I bumped my head for a second. I don't need the linkage for the shifting. I need everything for the clutch linkage besides the pedal and fork. My shifter has been relocated to the floor. Sorry for the confusion.
Posted via Mobile Device

Ok I have those as well. The pivot bracket, the clutch rod that goes to the pedal assembly, the rod that goes to the clutch fork, and the angle shaped pivot that goes on the clutch rod at the fork. 75 plus shipping for those. Do you need the clutch fork and the throw out bearing?

[HSRACER]

Originally Posted by CAJ1971

Actually I bumped my head for a second. I don't need the linkage for the shifting. I need everything for the clutch linkage besides the pedal and fork. My shifter has been relocated to the floor. Sorry for the confusion.
Posted via Mobile Device

Also you will need the pivot ball that attaches to the engine. I know I have one for a v8 but will need to remove one if yours is an inline 6

[jim-bob]

Originally Posted by HSRACER

I have some large truck mirrors on the truck I am going to part out for 60 bucks and a set on new in the box aftermarket mirrors for 100.

do you still happen to have these mirrors?

[HSRACER]

Originally Posted by jim-bob

do you still happen to have these mirrors?

Sorry, I sold them all

[zteca]

Do you have brake booster linkage? If so how much to 75214?

Thanks,

[ludwigmace]

Any chance you'd have a windshield wiper motor mount in good shape?

It'd look like this guy here:
http://67-72chevytrucks.com/vboard/s...8&postcount=73

[drewbert41]

Interior door handles still available by chance?

[cxune]

I'm really in need of a the part out of a 5 lug drum brake setup that has the adjuster gear on it.. not sure what this is called.. the piece at the bottom that fits between both shoes? It's for a '71. I tried to use the same part out of a 5 lug '87 and it was alot larger than the one I need.

Also, if you would sell them seperately and you know they are in ok shape, how much would you sell a set of springs?

I'm local, and if those items work out I'm interested in buying your glass as well.

Thanks-

[mikemikeska]

do you still have the shift rods available and are they for the Saginaw trans. if so I will take them .

[HSRACER]

Originally Posted by ludwigmace

Any chance you'd have a windshield wiper motor mount in good shape?

It'd look like this guy here:
http://67-72chevytrucks.com/vboard/s...8&postcount=73

Sorry for the huge delay on the response! But the good news is I have that exact piece that I cut out of a bad cab. 35 dollars plus the shipping. Let me know

[HSRACER]

Originally Posted by cxune

I'm really in need of a the part out of a 5 lug drum brake setup that has the adjuster gear on it.. not sure what this is called.. the piece at the bottom that fits between both shoes? It's for a '71. I tried to use the same part out of a 5 lug '87 and it was alot larger than the one I need.

Also, if you would sell them seperately and you know they are in ok shape, how much would you sell a set of springs?

I'm local, and if those items work out I'm interested in buying your glass as well.

Thanks-

Call or text me at 713 410 6715 and we can see what I have. I have two windshields also. One is clean and one has a small fish eye on it behind the mirror.

[HSRACER]

Originally Posted by drewbert41

Interior door handles still available by chance?

Yes I have some.

[HSRACER]

Originally Posted by zteca

Do you have brake booster linkage? If so how much to 75214?

Thanks,

I have this piece and the rest of the heavy duty booster and master cylinder. I am trying to sell them together for now.

[HSRACER]

Originally Posted by mikemikeska

do you still have the shift rods available and are they for the Saginaw trans. if so I will take them .

I have shift rods from three on the tree transmissions. I sold all the transmissions so I am not sure what brands the were. Is the three speed rods what you are looking for?

[lsjrl07]

Interested in trailing arms and 6-lug rear axle if you have one...

[HSRACER]

Originally Posted by lsjrl07

Interested in trailing arms and 6-lug rear axle if you have one...

I have some trailing arms and a leaf spring 6 lug axle. Let me know if you want either