|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
07-30-2015, 01:59 PM
|
#1 |
|
Registered User
Join Date: Apr 2012
Location: Sunny Youngwood PA
Posts: 463
|
62 C10 Rear End Saddle Spacing
First things first - I checked the FAQ Index, did the search, read multiple posts, etc. etc.
I have a 1962 Chevrolet C10 that has been in the works for some time and in that time I "misplaced" the notes on the original rear end saddle set up. Installed a 73 K10 3.08-1 rear without welding the saddles up until now... Time to set that up and weld the saddles and panhard bar mount. Can anyone provide me with OEM saddle spacing specifications for the original rear? Or simply measure from the backing plate to some point on the saddle and let me know. Thanks in advance! Bob |
|
|
|
07-30-2015, 02:51 PM
|
#2 |
|
Registered User
Join Date: Jan 2015
Location: Anaheim, ca
Posts: 120
|
Re: 62 C10 Rear End Saddle Spacing
I just welded the saddles on my '63 with '90 Suburban rear end. Centered the rear end in the frame, made the saddles/trailing arm/u-bolts equidistant to the axle housing ends on both sides. Admittedly, I winged it...
|
|
|
|
|
07-30-2015, 10:38 PM
|
#3 |
|
Registered User
Join Date: Nov 2006
Location: SOCAL
Posts: 25
|
Re: 62 C10 Rear End Saddle Spacing
I concur...I also winged it
__________________
US Army Veterano |
|
|
|
|
07-31-2015, 12:39 AM
|
#4 |
|
60-66 Nut
  Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,246
|
Re: 62 C10 Rear End Saddle Spacing
You also need to get the pinion angle correct.
__________________
Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE |
|
|
|
|
07-31-2015, 08:42 AM
|
#5 |
|
Registered User
Join Date: Aug 2009
Location: North Carolina
Posts: 127
|
Re: 62 C10 Rear End Saddle Spacing
If you figure it out let me know. I have a 77 rear end in my 62 that had brackets but they were so bad I cut them off.
__________________
84 GMC One ton 4x4 454 4 speed 62 Chevy C10 short fleet plus about 13 previous gm trucks from 1960 to 2000 |
|
|
|
|
07-31-2015, 09:05 AM
|
#6 |
|
Registered User
Join Date: Feb 2013
Location: Columbus, MS
Posts: 443
|
Re: 62 C10 Rear End Saddle Spacing
Same for me. My 60 has had two different 12 bolt rear ends, a 1967 with 3.73's and the current 1965 with 3.08's and I winged it too..
|
|
|
|
|
08-01-2015, 08:51 PM
|
#7 |
|
Registered User
Join Date: May 2012
Location: Murphy, MO
Posts: 172
|
Re: 62 C10 Rear End Saddle Spacing
I should still have my original rear housing if you still want the original specs. Let me know and I'll do my best to measure and post pics if you like.
__________________
'62 C10 LWB fleet side. 283 w/ a T5 |
|
|
|
|
08-01-2015, 11:42 PM
|
#8 |
|
Registered User
Join Date: Mar 2013
Location: Vail, Colorado
Posts: 163
|
Re: 62 C10 Rear End Saddle Spacing
mark the center of the original axle, take the pad measurements and angles from the original axle, then mark center of new axle and duplicate the measurements.
My friends and I do that with Jeep axle swaps and it works well. |
|
|
|
|
| Bookmarks |
|
|
Linear Mode
