Would you use nos power steering hoses. - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

chewychevy67 · 07-30-2015, 07:42 PM

I think I will try them. the rubber looks nice and I believe they were kept nice. if they don't work out ill maby use them for template and surely I can find someone to make new ones if I look hard enough.

**special-K** · 07-30-2015, 07:54 PM

I figure if the rubber isn't checked now when you bend it tight they are still good. The crimp doesn't go bad, it's the rubber it's crimped to. Those will fit tighter with fluid and pressure

**71CHEVYSHORTBED402** · 07-30-2015, 10:28 PM

If Special K says so it's probably so. My thinking was the inside of the hose might be compromised.

**special-K** · 07-31-2015, 11:43 PM

Hey, I ain't the final word on nuffin

. mostly, I just don't see what the big deal is. If they leak, oh well. I figure the concern is the expense. But, it seems Rod's attitude is he wants them right and as he says, if they're bad, he still had to buy them to have ones to model after. That could be done with old shot ones, if he had them. I can't wait to see this truck done!

chewychevy67 · 08-01-2015, 01:04 PM

I can't wait to see it done either. Its taking too long to find all the pieces.lol

**mike16** · 08-02-2015, 08:39 PM

are any of the hose part numbers the same as those for corvette? if so, typically the corvette stuff is very good current quality and if a corvette vendor does not have it he can contact his supplier to see if a "custom" hose can be made up. Suppliers would love to expand thier market.

The rule in general aviation is two years on the shelf and two years firewall forward.

07-30-2015, 07:42 PM	#26
chewychevy67 Registered User Join Date: Jan 2010 Location: Here Posts: 5,698	Re: Would you use nos power steering hoses. I think I will try them. the rubber looks nice and I believe they were kept nice. if they don't work out ill maby use them for template and surely I can find someone to make new ones if I look hard enough.

07-30-2015, 07:54 PM	#27
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,859	Re: Would you use nos power steering hoses. I figure if the rubber isn't checked now when you bend it tight they are still good. The crimp doesn't go bad, it's the rubber it's crimped to. Those will fit tighter with fluid and pressure __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

07-30-2015, 10:28 PM	#28
71CHEVYSHORTBED402 Senior Member Join Date: Feb 2009 Location: Northern Nevada Posts: 7,691	Re: Would you use nos power steering hoses. If Special K says so it's probably so. My thinking was the inside of the hose might be compromised. __________________ Tony 1971 C10 Custom Deluxe SWB 402/400TH A/C I developed an assembly information kit for restoring my truck from nuts and bolts. It's written in Assy. order, short & simple, packed with all OEM hardware ID; castings; part ID; 100s of part numbers; wiring simple - Resource, and trivial too. Much info. applies to all 67-72 GM, A/C vehicles, esp. trucks W/O saying. Full search ability, including to 700+ images of illus., parts, charts, Assy., points of interest, cab, bed, & front clip cart plans- Specials and cores were serviced out and R excluded e.g. front/rear glass, body/paint, engine core, rebuilt hinges, steering box, trans, etc. The project was in-line with long former professions developing process, policy, specs, demo, written for novices, admin., policy, engineers, development, systems & test - Public & govt 2, gross. Sell soft copy cheaply, PM if interested.Build thread:https://67-72chevytrucks.com/vboard/...d.php?t=730025

07-31-2015, 11:43 PM	#29
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,859	Re: Would you use nos power steering hoses. Hey, I ain't the final word on nuffin . mostly, I just don't see what the big deal is. If they leak, oh well. I figure the concern is the expense. But, it seems Rod's attitude is he wants them right and as he says, if they're bad, he still had to buy them to have ones to model after. That could be done with old shot ones, if he had them. I can't wait to see this truck done! __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

08-01-2015, 01:04 PM	#30
chewychevy67 Registered User Join Date: Jan 2010 Location: Here Posts: 5,698	Re: Would you use nos power steering hoses. I can't wait to see it done either. Its taking too long to find all the pieces.lol

08-02-2015, 08:39 PM	#31
mike16 Senior Member Join Date: Dec 2009 Location: bisbee, arizona Posts: 1,609	Re: Would you use nos power steering hoses. are any of the hose part numbers the same as those for corvette? if so, typically the corvette stuff is very good current quality and if a corvette vendor does not have it he can contact his supplier to see if a "custom" hose can be made up. Suppliers would love to expand thier market. The rule in general aviation is two years on the shelf and two years firewall forward.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.