front rotors & calipers for 70 K-10 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

original condor · 08-16-2015, 11:08 AM

I have a 70 k-10 with front discs on an open knuckle 44. Don't find any listings for rotors and calipers to fit a 70. Do I use 71/72 parts to replace these components? Many thanks.........Steve

**davischevy** · 08-16-2015, 12:24 PM

Front discs weren't available on the 70 K10, so I would have to assume the 71-72 Dana 44 would be the place to start referencing for parts.

**too much stuff** · 08-16-2015, 08:35 PM

Quote:

Originally Posted by davischevy

Front discs weren't available on the 70 K10, so I would have to assume the 71-72 Dana 44 would be the place to start referencing for parts.

This is correct...

franken · 08-16-2015, 08:39 PM

73 and up D44s bolt in as well and are more common. Not sure whether there are differences, but I'd compare old and new parts before buying.

**derotoreut** · 08-16-2015, 08:54 PM

Be nice if there were brake kits for this application. Anyone hear/know of any? I also have a 70 K10 with open knuckle design. If I can't find anything I may be on the look out for a mid 70's D44.

**davischevy** · 08-16-2015, 09:36 PM

We were given a Dana 44 out of a 75 Wagoneer. I haven't gone after it yet. Anybody know if there are differences between D44's in vehicle manufacturers.

stacerbob · 08-16-2015, 09:58 PM

The wagoneer should have GM calipers and rotors on it. The knuckles will bolt on but not sure of the steering arm length or height

**davischevy** · 08-16-2015, 10:19 PM

My uncle gave us a D44 laying behind his shop. Somebody had already "borrowed' the caliper brackets.

08-16-2015, 11:08 AM	#1
original condor Registered User Join Date: Oct 2013 Location: Lompoc Ca, Posts: 22	front rotors & calipers for 70 K-10 I have a 70 k-10 with front discs on an open knuckle 44. Don't find any listings for rotors and calipers to fit a 70. Do I use 71/72 parts to replace these components? Many thanks.........Steve __________________ 70 Custom K-10 LWB w/ mild build 350 Sm465 & 205 +GM truck 12 bolt rear Dana 44 up front....3.08 ratio 33" 12.50 15 on 8" rims 46" front leafs 52" rear leafs

08-16-2015, 12:24 PM	#2
davischevy Senior Member Join Date: Sep 2008 Location: Harrison, Arkansas Posts: 9,860	Re: front rotors & calipers for 70 K-10 Front discs weren't available on the 70 K10, so I would have to assume the 71-72 Dana 44 would be the place to start referencing for parts. __________________ other Larry Build thread, Arkansas K10 https://67-72chevytrucks.com/vboard/...=755797&page=5 The ability to speak several languages is an asset, but the ability to keep your mouth shut in any language is priceless.

08-16-2015, 08:39 PM	#4
franken Registered User Join Date: Jun 2013 Location: Somewhere Posts: 3,123	Re: front rotors & calipers for 70 K-10 73 and up D44s bolt in as well and are more common. Not sure whether there are differences, but I'd compare old and new parts before buying.

08-16-2015, 08:54 PM	#5
derotoreut Roto Reuter thats the name... Join Date: Feb 2010 Location: Darien, NY Posts: 1,853	Re: front rotors & calipers for 70 K-10 Be nice if there were brake kits for this application. Anyone hear/know of any? I also have a 70 K10 with open knuckle design. If I can't find anything I may be on the look out for a mid 70's D44. __________________ ~ Dan My 70 K10 SWB build:http://67-72chevytrucks.com/vboard/s...d.php?t=782232 My 71 SWB build:http://67-72chevytrucks.com/vboard/s...d.php?t=651394 1970 SWB Fleet K10 4X4, 5.3L LM7, 4L60E, Dakota Digital RTX, Vintage Air, Ididit tilt 1971 SWB Fleet C10 - Original SWB Arizona truck, new custom restoration project "Kick out your motor and drive while you're still alive - kick it out!" - Heart 1977

08-16-2015, 09:36 PM	#6
davischevy Senior Member Join Date: Sep 2008 Location: Harrison, Arkansas Posts: 9,860	Re: front rotors & calipers for 70 K-10 We were given a Dana 44 out of a 75 Wagoneer. I haven't gone after it yet. Anybody know if there are differences between D44's in vehicle manufacturers. __________________ other Larry Build thread, Arkansas K10 https://67-72chevytrucks.com/vboard/...=755797&page=5 The ability to speak several languages is an asset, but the ability to keep your mouth shut in any language is priceless.

08-16-2015, 09:58 PM	#7
stacerbob BODY SHOP SUPPLIES INC. Join Date: Oct 2006 Location: NE Arkansas Posts: 198	Re: front rotors & calipers for 70 K-10 The wagoneer should have GM calipers and rotors on it. The knuckles will bolt on but not sure of the steering arm length or height

08-16-2015, 10:19 PM	#8
davischevy Senior Member Join Date: Sep 2008 Location: Harrison, Arkansas Posts: 9,860	Re: front rotors & calipers for 70 K-10 My uncle gave us a D44 laying behind his shop. Somebody had already "borrowed' the caliper brackets. __________________ other Larry Build thread, Arkansas K10 https://67-72chevytrucks.com/vboard/...=755797&page=5 The ability to speak several languages is an asset, but the ability to keep your mouth shut in any language is priceless.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.