|
08-21-2015, 07:01 PM
|
#1 |
|
Registered User
Join Date: May 2015
Location: Ponte Vedra Florida
Posts: 27
|
68 C/10 build
I am the second owner of the truck, my mom and dad were the original owners purchasing it shortly after getting married. It was originally a step side 6 cylinder but has seen many transformations over the years and survived catching on fire, me and my two brothers learning how to drive and a whole lot more. I got i from my parents in the early 90's and drove it for a few years after giving it a freshly rebuilt 327. Other projects got in the way and it found its way to the garage where it set for a few years before i decided to start a frame off restoration. Pictures below are over the last 3 years, restoration stalled for awhile for a divorce, job change and move from Georgia to Tennessee. Hope you enjoy.
|
|
|
|
08-21-2015, 07:14 PM
|
#2 |
|
Registered User
Join Date: May 2015
Location: Ponte Vedra Florida
Posts: 27
|
Re: 68 C/10 build
I always wanted a tubular control arm front suspension and decided to try my hand at fabricating one myself and here are some of the results. I will just fork out the dough next time and buy a kit but it was fun anyway. I installed a fat bar rear suspension from No Limit.
|
|
|
|
|
08-21-2015, 07:23 PM
|
#3 |
|
Registered User
Join Date: May 2015
Location: Ponte Vedra Florida
Posts: 27
|
Re: 68 C/10 build
I originally wanted to build a big block but have since change my mind, here are a few picks mocked up with the BB and an ole intake i had laying around. I have recently bought a 6 liter eng. and trans out of a low mileage c2500 and have a Magnuson Supercharger ready to go on top. Should have some pics of the LS sitting in there pretty soon. Stay Tuned!!
|
|
|
|
|
08-21-2015, 10:15 PM
|
#4 |
|
Senior Member
 
Join Date: Jul 2012
Location: Oblong, Illinois
Posts: 7,028
|
Re: 68 C/10 build
Very cool! Great history on the truck too. I am tagging along.
|
|
|
|
|
08-21-2015, 10:27 PM
|
#5 |
|
Registered User
Join Date: Sep 2013
Location: Evansville, IN
Posts: 1,774
|
Re: 68 C/10 build
Nice start. In to watch the progression.
__________________
Ryan 1967 Red Stepside..."Laymond" http://67-72chevytrucks.com/vboard/s...40#post6441840 1972 Medium Olive SWB-Chester http://67-72chevytrucks.com/vboard/s...d.php?t=759628 1967/71 Blue SWB C10..SOLD 1977 SWB K10..my grandpa's.....never should have sold |
|
|
|
|
08-21-2015, 10:36 PM
|
#6 |
|
Registered User
Join Date: May 2009
Location: Monroe, LA
Posts: 2,105
|
Re: 68 C/10 build
I like it too, I'm subscribed!
__________________
Keith SOLD - 1963 C10 Short Fleet 350/700R4 4/6 drop 1967 GMC Super Custom - Short Fleet COPO concept w/427 BBC T-400 w/Doug Nash overdrive 4/6 Drop, Buddy Buckets, etc... Frame Off (In Progress) I call it "Vulgar Display of Power" 1980 Silverado Original paint 49k Original miles 4/6 drop Check out my build thread here: http://67-72chevytrucks.com/vboard/s...=1#post6209941 |
|
|
|
|
08-23-2015, 08:56 PM
|
#7 |
|
Registered User
Join Date: May 2015
Location: Ponte Vedra Florida
Posts: 27
|
Re: 68 C/10 build
Thanks to a good friend of mine for helping me get some of my ideas out of my head so i could see my vision. Not going with this paint scheme at least not for now.
|
|
|
|
|
10-17-2015, 09:38 PM
|
#8 |
|
Registered User
Join Date: May 2015
Location: Ponte Vedra Florida
Posts: 27
|
Re: 68 C/10 build
Its sitting in there now to get the steering linkage finished.
|
|
|
|
|
12-03-2016, 08:54 PM
|
#9 |
|
Registered User
Join Date: May 2015
Location: Ponte Vedra Florida
Posts: 27
|
Re: 68 C/10 build
Finally got it all mocked up.
|
|
|
|
|
12-03-2016, 09:03 PM
|
#10 |
|
Registered User
Join Date: May 2015
Location: Ponte Vedra Florida
Posts: 27
|
Re: 68 C/10 build
Smoothed out a few things and welded up some holes.
|
|
|
|
|
12-03-2016, 09:04 PM
|
#11 |
|
Senior Member
Join Date: Jun 2009
Location: Belews Creek , NC
Posts: 4,220
|
Re: 68 C/10 build
Very nice build and truck history is awesome .. Subscribed !!
__________________
Larry It is easily overlooked that what is now called vintage was once brand new. "Project 68" paypal.me/ldgrant |
|
|
|
|
12-03-2016, 09:06 PM
|
#12 |
|
Registered User
Join Date: May 2015
Location: Ponte Vedra Florida
Posts: 27
|
Re: 68 C/10 build
Floors are done, roof front panel replaced and some rust removed and welded up. The cab is all roughed in now.
|
|
|
|
|
12-29-2016, 09:26 PM
|
#13 |
|
Registered User
Join Date: May 2015
Location: Ponte Vedra Florida
Posts: 27
|
Re: 68 C/10 build
Got the frame painted and ready to go back together.
|
|
|
|
|
12-29-2016, 09:32 PM
|
#14 |
|
Registered User
Join Date: May 2015
Location: Ponte Vedra Florida
Posts: 27
|
Re: 68 C/10 build
Floor pans got a fresh coat of sound deadening. Now to Paint the cab and get it back on the frame.
|
|
|
|
|
12-30-2016, 04:45 PM
|
#15 |
|
Registered User
Join Date: Sep 2011
Location: Ark City, Kansas
Posts: 3,387
|
Re: 68 C/10 build
Look'n Good, Billy Ray!!!
As much as I am a fan of the "old" Chevrolet engines, the LS engine is an awesome engine, just like 1955 all over again, when folks were scrambling through the junk yards for freshly wrecked Chevy's with 265's in them. When have you heard of somebody planting a Triton or a hemi into a Hot Rod, it happens, but rarely!!! |
|
|
|
|
12-30-2016, 10:50 PM
|
#16 | |
|
*************
Join Date: Apr 2005
Location: Pensacola, FL
Posts: 17,859
|
Re: 68 C/10 build
Quote:
 . I have a similar setup in my suburban, let me know if you have any questions.
__________________
Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3 |
|
|
|
|
|
12-31-2016, 06:28 AM
|
#17 |
|
Senior Member
Join Date: Jun 2009
Location: Belews Creek , NC
Posts: 4,220
|
Re: 68 C/10 build
What is the sound deadener you sprayed on the floor boards ?
__________________
Larry It is easily overlooked that what is now called vintage was once brand new. "Project 68" paypal.me/ldgrant |
|
|
|
|
01-05-2017, 10:07 PM
|
#18 |
|
Registered User
Join Date: May 2015
Location: Ponte Vedra Florida
Posts: 27
|
Re: 68 C/10 build
Just a few more pics of things going back together.
|
|
|
|
|
01-05-2017, 10:52 PM
|
#19 |
|
Registered User
Join Date: Feb 2016
Location: China Grove, NC
Posts: 93
|
Re: 68 C/10 build
Looking good. What color did you decide on?
__________________
Boyd -67' C10 SWB FLEETSIDE LS 5.3 4 speed muncie 
|
|
|
|
|
01-05-2017, 11:18 PM
|
#20 |
|
Registered User
Join Date: May 2015
Location: Ponte Vedra Florida
Posts: 27
|
Re: 68 C/10 build
Thanks Boyd. I decided on a purple from house of kolor I planned on shooting the cab and firewall this weekend but I don't think the weather is going to cooperate. Might have to load it up and take it to my brothers shop, he has 2 heated booths.
|
|
|
|
|
01-05-2017, 11:28 PM
|
#21 |
|
Senior Member
Join Date: Jan 2015
Location: Marquette Heights, IL.
Posts: 1,135
|
Re: 68 C/10 build
Looking Good! I really like the story that goes with the truck too.
__________________
Jimmy Hoelzel |
|
|
|
|
01-05-2017, 11:41 PM
|
#22 |
|
Registered User
Join Date: May 2015
Location: Ponte Vedra Florida
Posts: 27
|
Re: 68 C/10 build
Thanks!
|
|
|
|
|
01-07-2017, 05:23 PM
|
#23 |
|
Registered User
Join Date: May 2015
Location: Ponte Vedra Florida
Posts: 27
|
Re: 68 C/10 build
A few more pics of the latest progress.
|
|
|
|
|
01-22-2017, 10:34 PM
|
#24 |
|
Registered User
Join Date: May 2015
Location: Ponte Vedra Florida
Posts: 27
|
Re: 68 C/10 build
I put a little color on the cab. I had to order some more base coat and wasn't able to put any clear on it yet.
|
|
|
|
|
01-23-2017, 01:57 AM
|
#25 |
|
Senior Member
Join Date: Jan 2015
Location: Marquette Heights, IL.
Posts: 1,135
|
Re: 68 C/10 build
WOW!!! That is PURPLE for sure! It will not get lost in a parking lot for sure!
__________________
Jimmy Hoelzel |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
