|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
08-25-2015, 11:00 PM
|
#1 |
|
Registered User
Join Date: May 2010
Location: Shoals, AL
Posts: 299
|
Worried about control arm shaft torque
I put new poly bushings in. Installed the control arms and now I am torquing the shaft nuts. 115 upper & lower. Does that sound right? Pass side looked good. Driver side upper has me concerned. When I got them to 115, the nuts were hardly touching the bushings, I mean I could spin them around the shaft. What gives?
|
|
|
|
08-26-2015, 07:33 AM
|
#2 |
|
Registered User
Join Date: Dec 2004
Location: Highland, IN
Posts: 2,326
|
Re: Worried about control arm shaft torque
I could be wrong on this, but tighten the back nuts and then the front, then torque
__________________
Chris _______________________________ 1979 Chevy Stepside SPORT 2018 Chevy Silverado, 39 years apart  My build 2008-2016. http://m.imgur.com/a/bURrE |
|
|
|
|
08-26-2015, 08:26 AM
|
#3 |
|
Registered User
Join Date: May 2010
Location: Shoals, AL
Posts: 299
|
Re: Worried about control arm shaft torque
I don't see how that would matter seeing how I have them mounted on the truck. I did not torque them while they were off. Maybe someone else will chim in.
|
|
|
|
|
08-26-2015, 12:35 PM
|
#4 |
|
Registered User
Join Date: May 2010
Location: Shoals, AL
Posts: 299
|
Re: Worried about control arm shaft torque
Anyone?
|
|
|
|
|
08-26-2015, 01:40 PM
|
#5 | |
|
Registered User
Join Date: Jun 2015
Location: Richmond,KY and Knoxville,TN
Posts: 1,584
|
Re: Worried about control arm shaft torque
Quote:
Control arm bushings are 115 ft lbs Lower control arm shaft u bolts 80 ft lbs That is per GM Torque Specs. |
|
|
|
|
|
08-26-2015, 07:51 PM
|
#6 |
|
Registered User
Join Date: Jul 2009
Location: San Jose Ca
Posts: 2,871
|
Re: Worried about control arm shaft torque
I had to trim my poly bushings about 1/16'' to get the washers to touch the bushing when torqued down properly. Don't go to far or you will crush the bushing and clamp down on the arm.
__________________
David Used parts build: http://67-72chevytrucks.com/vboard/s...d.php?t=638991 My brother's Nova: http://www.67-72chevytrucks.com/vboa...d.php?t=727985 Rear suspension rework: http://www.67-72chevytrucks.com/vboa...d.php?t=750557 Instagram: myfabguy |
|
|
|
|
| Bookmarks |
|
|
Linear Mode
