Parting out 78 Blazer! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

alf4444 · 02-17-2004, 02:34 PM

I'm parting out a 78 blazer so if you need anything let me know!

**old Rusty C10** · 02-17-2004, 03:19 PM

what color interior and how are the door panels/dash pad ( if its power windows locks please forget it

Destructo · 02-17-2004, 03:36 PM

Did it have an air pump on it? Also does it still have engine in it? Q-Jet? My friend needs a Q-Jet on his camaro to pass emissions.

alf4444 · 02-17-2004, 03:41 PM

Interior is red and dash has a couple cracks I'll take pics of the rest of the interior if you want.

No air pump and the engine has been spoken for I do I have a qudrajet off my other 78 that needs a quick rebuild (secondaries are sticking) hows $60 plus ride sound.

bigblock73 · 02-17-2004, 08:19 PM

I would like to know the condition and see the drivers side trim piece that goes from the door to the rear of the Blazer...if that makes sense. It is directly below the side window(s).

Also, before someone asks...Are there rear seat belts and what kind of condition are they in? I am asking for Chris (Kaos), he needs a set. (unless he buys MY Blazer

)

Thanks

bigblock73 · 02-17-2004, 08:20 PM

One last question, how is the body...primarily the pass front fender?

**Captkaos** · 02-17-2004, 09:15 PM

Quote:

Originally posted by bigblock73
Also, before someone asks...Are there rear seat belts and what kind of condition are they in? I am asking for Chris (Kaos), he needs a set. (unless he buys MY Blazer )
Thanks

Definitely need the outer seatbelts! Thanks Jeff!

rich-white · 02-17-2004, 10:48 PM

Do you have the console and bucket seats and what kind of shape.

alf4444 · 02-17-2004, 11:34 PM

Rear side panels are gone.

Seatbelt are there and I will attempt to get them out, if you have ever tried you know its not an easy task.

Both front fenders are in good shape but I'm kinda thinkin there aftermarket.

Front seats are stock non reclining k5 seats out of a newer blazer, gray in color no rips or tears but a little dirty. console is the older style without a lock and definately needs a new dye job, it has a small crack on the side but once its in you would never see it and 2 1/4 holes in the front probably from a cb. The mounting bracket for the rear of it is also included.

bigblock73 · 02-18-2004, 12:53 AM

Thanks for lookin, but I will have to pass on the fenders.

danadena1960 · 02-18-2004, 01:53 AM

Does it have a NP203 transfer case? If so, does it have the rubber shift boot and what shape is it in?
How about the door panels?
Thanks,
Dana

alf4444 · 02-18-2004, 12:22 PM

Yes It has the shift boot and its in good shape, door panel aren't in the best shape heres pics for everyone

http://community.webshots.com/album/119293208irZzUv

danadena1960 · 02-18-2004, 12:37 PM

Hey Alf,
Does it have the plate that attaches it to the floor with HiLoc Hi N Lo LoLoc? If it does and the boot does not have any tears, holes, etc. on it, what you want shipped to 30281?
Also, the intrument bezel, what shape is it in, cracks, wear, stereo opening, etc. and how much would you want for that?
As for the door panels, how is the aluminum and the bezels on them? How much would you want for them? (Door panels)
If the boot is in excellent shape and is for a NP203, I would like to snag that from you.
Thanks,
Dana

alf4444 · 02-18-2004, 12:42 PM

Quote:

Originally posted by danadena1960
Hey Alf,
Does it have the plate that attaches it to the floor with HiLoc Hi N Lo LoLoc? If it does and the boot does not have any tears, holes, etc. on it, what you want shipped to 30281?
Also, the intrument bezel, what shape is it in, cracks, wear, stereo opening, etc. and how much would you want for that?
As for the door panels, how is the aluminum and the bezels on them? How much would you want for them? (Door panels)
If the boot is in excellent shape and is for a NP203, I would like to snag that from you.
Thanks,
Dana

I'll check to make sure the boot has no tears but I don't think it does How does $35 shipped sound with everything.

aluminum on the door panels has been zip screwed to the panel and the dash bezel has been cut for a radio.

**Captkaos** · 02-18-2004, 02:07 PM

Let me know on the rear outside seatbelts. zip 35224

danadena1960 · 02-19-2004, 11:38 AM

Hey Alf,
When you find out the shape let me know. I have all of my stuff but the boot has a small tear in it. I'm looking for one in excellent shape.
Thanks,
Dana

Tom Felso Jr · 02-19-2004, 03:10 PM

HI,
Do you still have the console? If so what color and what kind of shape is in it? Thanks
Tom

alf4444 · 02-19-2004, 05:12 PM

heres the console

http://cgi.ebay.com/ws/eBayISAPI.dll...=STRK:MESSE:IT

GMCLS1 · 02-22-2004, 05:22 PM

Does it have a 10, 12 or 14 bolt rear end? What gear ratio is it and is it posi, limited, or open?

**N2TRUX** · 02-23-2004, 11:08 AM

Speaking of seatbelts. If the rear center section has boots like these below I would be very interested...

alf4444 · 02-23-2004, 11:34 AM

It doesn't have boots like in the pic, axel has been spoken for and the tcase boot is ripped.

cochino12 · 02-23-2004, 11:55 AM

is it a.c.? I need a compressor

alf4444 · 02-24-2004, 01:06 PM

No I didn't forget you Capt your belts are currently getting soaked with some PB so I can hopefully get them off without striping the head and giving myself a hernia (sp?).

alf4444 · 02-24-2004, 01:08 PM

Anyone need a pretty good ps door blue outside white inside?

8t42wdburb · 02-27-2004, 01:41 PM

1/2 ton or3/4 ton?

02-17-2004, 02:34 PM	#1
alf4444 Registered User Join Date: Dec 2002 Location: taylorsville, UT Posts: 778	Parting out 78 Blazer! I'm parting out a 78 blazer so if you need anything let me know! __________________ 2011 CCSB GMC 2500HD DMAX 73 GMC 3/4 ton 4x4 96 Chevy 1500 STD Cab Shortbed Z71 Owner of WickedWolfRC.com

02-17-2004, 03:19 PM	#2
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,310	what color interior and how are the door panels/dash pad ( if its power windows locks please forget it __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

02-17-2004, 03:36 PM	#3
Destructo Registered User Join Date: Sep 2003 Location: Lewisville, NC Posts: 1,836	Did it have an air pump on it? Also does it still have engine in it? Q-Jet? My friend needs a Q-Jet on his camaro to pass emissions. __________________ 1985 Scottsdale Shortbed 4x4 Stout 350 with some "upgrades"-700r4-33x12.5" Mud Tires, Warn 8274-50 winch. 2005 Chevrolet Colorado Regular Cab 2wd 4-banger, 5 speed, Street Pack with 3.73 axle.

02-17-2004, 03:41 PM	#4
alf4444 Registered User Join Date: Dec 2002 Location: taylorsville, UT Posts: 778	Interior is red and dash has a couple cracks I'll take pics of the rest of the interior if you want. No air pump and the engine has been spoken for I do I have a qudrajet off my other 78 that needs a quick rebuild (secondaries are sticking) hows $60 plus ride sound. __________________ 2011 CCSB GMC 2500HD DMAX 73 GMC 3/4 ton 4x4 96 Chevy 1500 STD Cab Shortbed Z71 Owner of WickedWolfRC.com

02-17-2004, 08:19 PM	#5
bigblock73 yeller Join Date: Oct 2001 Location: Twin Cities Posts: 13,824	I would like to know the condition and see the drivers side trim piece that goes from the door to the rear of the Blazer...if that makes sense. It is directly below the side window(s). Also, before someone asks...Are there rear seat belts and what kind of condition are they in? I am asking for Chris (Kaos), he needs a set. (unless he buys MY Blazer ) Thanks __________________ Jeff 73-87.com 73-87.com Facebook page 73-87 cab corner 6x9 speaker brackets for sale 67-72 cab corner speaker brackets for sale 47-54 cab corner speaker brackets for sale

02-17-2004, 08:20 PM	#6
bigblock73 yeller Join Date: Oct 2001 Location: Twin Cities Posts: 13,824	One last question, how is the body...primarily the pass front fender? __________________ Jeff 73-87.com 73-87.com Facebook page 73-87 cab corner 6x9 speaker brackets for sale 67-72 cab corner speaker brackets for sale 47-54 cab corner speaker brackets for sale

02-17-2004, 10:48 PM	#8
rich-white Registered User Join Date: Feb 2004 Location: st. Louis Missouri Posts: 414	Do you have the console and bucket seats and what kind of shape.

02-17-2004, 11:34 PM	#9
alf4444 Registered User Join Date: Dec 2002 Location: taylorsville, UT Posts: 778	Rear side panels are gone. Seatbelt are there and I will attempt to get them out, if you have ever tried you know its not an easy task. Both front fenders are in good shape but I'm kinda thinkin there aftermarket. Front seats are stock non reclining k5 seats out of a newer blazer, gray in color no rips or tears but a little dirty. console is the older style without a lock and definately needs a new dye job, it has a small crack on the side but once its in you would never see it and 2 1/4 holes in the front probably from a cb. The mounting bracket for the rear of it is also included. __________________ 2011 CCSB GMC 2500HD DMAX 73 GMC 3/4 ton 4x4 96 Chevy 1500 STD Cab Shortbed Z71 Owner of WickedWolfRC.com

02-18-2004, 12:53 AM	#10
bigblock73 yeller Join Date: Oct 2001 Location: Twin Cities Posts: 13,824	Thanks for lookin, but I will have to pass on the fenders. __________________ Jeff 73-87.com 73-87.com Facebook page 73-87 cab corner 6x9 speaker brackets for sale 67-72 cab corner speaker brackets for sale 47-54 cab corner speaker brackets for sale

02-18-2004, 01:53 AM	#11
danadena1960 Registered User Join Date: Aug 2003 Location: Stockbridge, GA (Suburbs of Atlanta) Posts: 126	Does it have a NP203 transfer case? If so, does it have the rubber shift boot and what shape is it in? How about the door panels? Thanks, Dana __________________ Dana 77 K-20 454 73 SS El Camino 454 68 SS Camaro 327 48 Chevy 216 755 John Deere

02-18-2004, 12:22 PM	#12
alf4444 Registered User Join Date: Dec 2002 Location: taylorsville, UT Posts: 778	Yes It has the shift boot and its in good shape, door panel aren't in the best shape heres pics for everyone http://community.webshots.com/album/119293208irZzUv __________________ 2011 CCSB GMC 2500HD DMAX 73 GMC 3/4 ton 4x4 96 Chevy 1500 STD Cab Shortbed Z71 Owner of WickedWolfRC.com

02-18-2004, 12:37 PM	#13
danadena1960 Registered User Join Date: Aug 2003 Location: Stockbridge, GA (Suburbs of Atlanta) Posts: 126	Hey Alf, Does it have the plate that attaches it to the floor with HiLoc Hi N Lo LoLoc? If it does and the boot does not have any tears, holes, etc. on it, what you want shipped to 30281? Also, the intrument bezel, what shape is it in, cracks, wear, stereo opening, etc. and how much would you want for that? As for the door panels, how is the aluminum and the bezels on them? How much would you want for them? (Door panels) If the boot is in excellent shape and is for a NP203, I would like to snag that from you. Thanks, Dana __________________ Dana 77 K-20 454 73 SS El Camino 454 68 SS Camaro 327 48 Chevy 216 755 John Deere

02-18-2004, 02:07 PM	#15
Captkaos www.73-87chevytrucks.com Join Date: Dec 1999 Location: Birmingham, AL Posts: 6,935	Let me know on the rear outside seatbelts. zip 35224 __________________ Chris Lucas 1973 Chevy C-10 1978 GMC Jimmy (2WD) - SOLD 1987 R10 twin turbo LS 1991 R3500 SRW CrewCab 1985 K5 diesel swapped project 1989 K5 2WD conversion w/ Vette susp Project Captkaos Customs 73-87chevytrucks.com

02-19-2004, 11:38 AM	#16
danadena1960 Registered User Join Date: Aug 2003 Location: Stockbridge, GA (Suburbs of Atlanta) Posts: 126	Hey Alf, When you find out the shape let me know. I have all of my stuff but the boot has a small tear in it. I'm looking for one in excellent shape. Thanks, Dana __________________ Dana 77 K-20 454 73 SS El Camino 454 68 SS Camaro 327 48 Chevy 216 755 John Deere

02-19-2004, 03:10 PM	#17
Tom Felso Jr Registered User Join Date: Jan 2004 Location: Belleville NJ/Dingmans Ferry Pa Posts: 24	78 blazer HI, Do you still have the console? If so what color and what kind of shape is in it? Thanks Tom __________________ 1982 Chevy C20 4wd 1965 Impala wagon (4wd) 1965 Biscayne Wagon (Stock) 1965 ImpalaSS Ragtop 1969 Camaro) 1974 GMC 7500 Dump Truck !992 Chrysler Lebaron Ragtop !993 Ford Mustang GT Ragtop



Register or Log In To remove these advertisements.

02-19-2004, 05:12 PM	#18
alf4444 Registered User Join Date: Dec 2002 Location: taylorsville, UT Posts: 778	heres the console http://cgi.ebay.com/ws/eBayISAPI.dll...=STRK:MESSE:IT __________________ 2011 CCSB GMC 2500HD DMAX 73 GMC 3/4 ton 4x4 96 Chevy 1500 STD Cab Shortbed Z71 Owner of WickedWolfRC.com

02-22-2004, 05:22 PM	#19
GMCLS1 1987 GMC Sierra Classic Join Date: Feb 2004 Location: South Carolina Posts: 121	rear end? Does it have a 10, 12 or 14 bolt rear end? What gear ratio is it and is it posi, limited, or open? __________________ Gary L Hilton jr

02-23-2004, 11:08 AM	#20
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,021	Speaking of seatbelts. If the rear center section has boots like these below I would be very interested... Attached Images __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra"

02-23-2004, 11:34 AM	#21
alf4444 Registered User Join Date: Dec 2002 Location: taylorsville, UT Posts: 778	It doesn't have boots like in the pic, axel has been spoken for and the tcase boot is ripped. __________________ 2011 CCSB GMC 2500HD DMAX 73 GMC 3/4 ton 4x4 96 Chevy 1500 STD Cab Shortbed Z71 Owner of WickedWolfRC.com

02-23-2004, 11:55 AM	#22
cochino12 It followed me home? Join Date: Mar 2003 Location: Yup Posts: 5,751	is it a.c.? I need a compressor __________________ Adam That's why they call it a shortcut Kyle, if it was easy it would just be the way. 86 c-10 SWB 85 CCSB 90 GMC K30 Crew SRW 1985 C30 Dually

02-24-2004, 01:06 PM	#23
alf4444 Registered User Join Date: Dec 2002 Location: taylorsville, UT Posts: 778	No I didn't forget you Capt your belts are currently getting soaked with some PB so I can hopefully get them off without striping the head and giving myself a hernia (sp?). __________________ 2011 CCSB GMC 2500HD DMAX 73 GMC 3/4 ton 4x4 96 Chevy 1500 STD Cab Shortbed Z71 Owner of WickedWolfRC.com

02-24-2004, 01:08 PM	#24
alf4444 Registered User Join Date: Dec 2002 Location: taylorsville, UT Posts: 778	Anyone need a pretty good ps door blue outside white inside? __________________ 2011 CCSB GMC 2500HD DMAX 73 GMC 3/4 ton 4x4 96 Chevy 1500 STD Cab Shortbed Z71 Owner of WickedWolfRC.com

02-27-2004, 01:41 PM	#25
8t42wdburb Registered User Join Date: Feb 2004 Location: washington st Posts: 23	1/2 ton or3/4 ton?

Register or Log In To remove these advertisements.