F/S swb 4x4 rolling chassis - The 1947 - Present Chevrolet & GMC Truck Message Board Network

swdobbs · 02-18-2004, 01:45 AM

I haven't seen one of these that hasn't been cut up or stripped for parts. Attached are some pics, ignore the cab - someone stored a gutted cab on the frame. We haven't had the grinder out to check the year, but the chassis is a factory swb setup Dana 44 front Eaton rear. Asking $800 obo buyer arranges shipping. I'd be happy to answer any questions as to the condition, provide numbers and additional pics.

swdobbs...

muddyole 69 · 03-07-2004, 07:57 AM

Did you ever figure out what year of truck this thing is for ?

swdobbs · 03-08-2004, 11:40 AM

We think its a 65, factory 3/4 ton 4x4....

swdobbs

swdobbs · 03-08-2004, 11:41 AM

Its a 65, factory 3/4 ton 4x4....

swdobbs

muddyole 69 · 03-08-2004, 10:01 PM

Thanks I wonder what all would be involved in putting 67-72 body on one of these ?

swdobbs · 03-09-2004, 12:30 PM

A one off 3/4 swb 4x4.......the stuff of dreams.

ought to be nothing more that locating the dozen or so clip/cab supports correctly. The box should be the easiest part to chair/square up.

A chaulk pencil, a square and a case of beer.

swdobbs....

kennyw · 03-31-2004, 05:30 PM

Cant be a factory 3/4 ton SWB (because they were not available) but someone could have swapped the axles into the SWB frame...

highboy_04 · 04-15-2004, 02:29 AM

a 67-72 should fit right on there. and no there is no such thing as a swb 3/4 ton(from the factory).

02-18-2004, 01:45 AM	#1
swdobbs Registered User Join Date: Oct 2002 Location: MT Posts: 98	F/S swb 4x4 rolling chassis I haven't seen one of these that hasn't been cut up or stripped for parts. Attached are some pics, ignore the cab - someone stored a gutted cab on the frame. We haven't had the grinder out to check the year, but the chassis is a factory swb setup Dana 44 front Eaton rear. Asking $800 obo buyer arranges shipping. I'd be happy to answer any questions as to the condition, provide numbers and additional pics. swdobbs...

03-07-2004, 07:57 AM	#2
muddyole 69 Senior Member Join Date: Jan 2004 Location: SE Ohio Posts: 1,121	swb chassis Did you ever figure out what year of truck this thing is for ? __________________ hav'n fun be'n me

03-08-2004, 11:40 AM	#3
swdobbs Registered User Join Date: Oct 2002 Location: MT Posts: 98	Chassis year We think its a 65, factory 3/4 ton 4x4.... swdobbs

03-08-2004, 11:41 AM	#4
swdobbs Registered User Join Date: Oct 2002 Location: MT Posts: 98	Chassis year Its a 65, factory 3/4 ton 4x4.... swdobbs

03-08-2004, 10:01 PM	#5
muddyole 69 Senior Member Join Date: Jan 2004 Location: SE Ohio Posts: 1,121	frame Thanks I wonder what all would be involved in putting 67-72 body on one of these ? __________________ hav'n fun be'n me

03-09-2004, 12:30 PM	#6
swdobbs Registered User Join Date: Oct 2002 Location: MT Posts: 98	body swap... A one off 3/4 swb 4x4.......the stuff of dreams. ought to be nothing more that locating the dozen or so clip/cab supports correctly. The box should be the easiest part to chair/square up. A chaulk pencil, a square and a case of beer. swdobbs....

03-31-2004, 05:30 PM	#7
kennyw N9PHW Join Date: Jan 2003 Location: PNW USA Posts: 136	Cant be a factory 3/4 ton SWB (because they were not available) but someone could have swapped the axles into the SWB frame... __________________ "I got it one piece at a time and it didn't cost me a dime..."

04-15-2004, 02:29 AM	#8
highboy_04 Registered User Join Date: Mar 2003 Location: kansas Posts: 1,071	a 67-72 should fit right on there. and no there is no such thing as a swb 3/4 ton(from the factory). __________________ '67 c10 350/th350 Last edited by highboy_04; 04-15-2004 at 02:31 AM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.