New Product: Shortened rear wheel tubs for Slammed rear trucks

[BigShoe24]

These look really nice. Would it be possible to take a few pictures with a measuring tape on them? I'm interested to see over height, width and length. Just trying to gauge whether they'll clear my tire. Also, how are you attaching to bed side; just mounting it flush against it with perhaps a little rubber trim in between?

[Hart_Rod]

Originally Posted by BigShoe24

These look really nice. Would it be possible to take a few pictures with a measuring tape on them? I'm interested to see over height, width and length. Just trying to gauge whether they'll clear my tire. Also, how are you attaching to bed side; just mounting it flush against it with perhaps a little rubber trim in between?

Shoot me a text and I'll send you some pictures 850-291-0499. Rob

[Hart_Rod]

Originally Posted by BigShoe24

These look really nice. Would it be possible to take a few pictures with a measuring tape on them? I'm interested to see over height, width and length. Just trying to gauge whether they'll clear my tire. Also, how are you attaching to bed side; just mounting it flush against it with perhaps a little rubber trim in between?

I offer two versions of the tubz. One is 1" wider than stock (CT41s) and the other is 4" wider than stock (CT44's). Both versions are 7.5" tall and the same length as a factory wheel tubs. They have a lip than can be bolted to the bedside just like the factory wheel tubz. The bodylines also line up for a factory look. Here are some pictures of the with a tape measure. Thanks for your inquiry and let me know if you have any other questions.

[Hart_Rod]

Originally Posted by BigShoe24

These look really nice. Would it be possible to take a few pictures with a measuring tape on them? I'm interested to see over height, width and length. Just trying to gauge whether they'll clear my tire. Also, how are you attaching to bed side; just mounting it flush against it with perhaps a little rubber trim in between?

PM sent.

[Hart_Rod]

Another beautifully completed bed!!!

[Hart_Rod]

UPDATED PRICING!!!!

Due to some streamlining in our build process, we have been able to reduce the cost of production. Soooooo, I'm going to pass that on to our customers!!!

New prices:
CT41's - $469 + Shipping (10" wide wheel and tire)
CT44's - $539 + Shipping (12" wide wheel and tire)
CT47's - please inquire (15" wide wheel and tire)

[SierraMtns]

Originally Posted by Hart_Rod

UPDATED PRICING!!!!

Due to some streamlining in our build process, we have been able to reduce the cost of production. Soooooo, I'm going to pass that on to our customers!!!

New prices:
CT41's - $469 + Shipping (10" wide wheel and tire)
CT44's - $539 + Shipping (12" wide wheel and tire)
CT47's - please inquire (15" wide wheel and tire)

WOW...very cool. Not to many business do this anymore. Thank you.

[Hart_Rod]

Originally Posted by SierraMtns

WOW...very cool. Not to many business do this anymore. Thank you.

Thanks! Well, I really don't consider myself a business. I'm just trying to contribute a small part to our hobby and to help reduce the frustration and aggravation that we all encounter when building our projects, .

[smashmix]

I might just have to get these for my69

[Hart_Rod]

Originally Posted by smashmix

I might just have to get these for my69

Sounds good! What size do you need?

[smashmix]

I'm looking at running a 24 x 12 wheel so not sure what size the bed will be raised also
Posted via Mobile Device

[Hart_Rod]

Originally Posted by smashmix

I'm looking at running a 24 x 12 wheel so not sure what size the bed will be raised also
Posted via Mobile Device

How tall is your tire? These will accommodate a 32" tall tire. That's about as tall as you can go, unless you cut the bed lip. The bed will be raised approximately 11". You'll need the CT44's. I've got them in stock and ready to ship. Let me know.

[Hart_Rod]

Bump!

[blake's first]

Here is another new product .....

[smashmix]

Wow that gauge cluster is we some how much for that

[blake's first]

Originally Posted by smashmix

Wow that gauge cluster is we some how much for that

I don't know if they are priced yet But you can call and check 916-373-9783. Marquez Design

[smashmix]

Do they have a website by any chance
Posted via Mobile Device

[blake's first]

Originally Posted by smashmix

Do they have a website by any chance
Posted via Mobile Device

Yes it's Marquezdesign. Com. But they won't be on there they are new but you can email them and find out

[nlped]

Finally saw your Chubtubz & I gotta say I liked them. They look just like the metal ones in Betty. I asked "Big Willie" if those were yours too.

[Hart_Rod]

Originally Posted by nlped

Finally saw your Chubtubz & I gotta say I liked them. They look just like the metal ones in Betty. I asked "Big Willie" if those were yours too.

Thanks! Glad you like them, !

[Hart_Rod]

Here's some mounted CT47's !

[Hart_Rod]

I'm running a Black Friday sale until the end of November, .

CT41's - $450 + shipping
CT44's - $525 + shipping
CT47's - Please enquire

These prices are good on all ChubTubz ordered by the end of November! You can text for more information or to order @8502910499. Please follow me on Instagram also, hart_rod_chubtubz.

Thanks, .

[ptc]

Hi Rob,

I dont see any reason why you couldnt run these tubz on any type of bed (fleet or step) or year of truck. I mean with the fiberglass being so amiable to modification the sky is the limit really. Step side beds are completely flat on the inside except for a couple bullets impressed in the them but that could be easily filled.

I wish I would have seen these before I custom built my own steel wheel tubs!!! these would have worked great for my big PHAT tires!!!!

I would open up your sales to all truck models....

[Hart_Rod]

Originally Posted by ptc

Hi Rob,

I dont see any reason why you couldnt run these tubz on any type of bed (fleet or step) or year of truck. I mean with the fiberglass being so amiable to modification the sky is the limit really. Step side beds are completely flat on the inside except for a couple bullets impressed in the them but that could be easily filled.

I wish I would have seen these before I custom built my own steel wheel tubs!!! these would have worked great for my big PHAT tires!!!!

I would open up your sales to all truck models....

Thanks PTC!! And you are correct they will work on practically any truck with a raised bed floor. They will just need slight modifications for the bedsides. Here's a picture of a set in a 64C10.

[Hart_Rod]

10 days left in the Black Friday sale!!!