NC WTB - used 1970 LWB Fleet Trim

[NC_John]

I went through my trim inventory for the farm truck and this is what I need to finish my set. Looking for black, not wood, in decent shape (no dents, serious dings etc.) but nothing too pretty for this old truck- the other pieces are all original so I am hoping for similar aged pieces here.

Drivers Side - I need the rear lower piece for the bed (between wheel well and rear bumper) and the lower piece for the door.

Passenger Side - I need the front fender upper trim, the upper door trim and the bed upper trim. The only upper piece for the passenger side I have that I can reuse is the little cab corner. The lower trim is all good on that side.

I'm not concerned about the mounting parts - I think I am going to order a complete repop set.

Shipping would be to 28138.

Thanks.

[Ironhorse]

I have a nice driver quality set of the upper driver and passenger door trim, two pieces. Rather not break them up, prefer to sell as a set. No attaching hardware but you mentioned using new hardware. $20 for the set (pair) plus shipping if interested. Money order or $$ only, don't have Paypal. Can do pics if you want them.

[michael bustamante]

i have a nice upper bed stainless trim for the longbed. i dont know how we`d ship it though

[NC_John]

Originally Posted by Ironhorse

I have a nice driver quality set of the upper driver and passenger door trim, two pieces. Rather not break them up, prefer to sell as a set. No attaching hardware but you mentioned using new hardware. $20 for the set (pair) plus shipping if interested. Money order or $$ only, don't have Paypal. Can do pics if you want them.

Thanks but that'll probably end up costing me $40 for the one piece I need with shipping. I'm going to hold out a bit and see if I can find everything together to save on shipping. Thanks for the offer - we may talk yet.

[NC_John]

Originally Posted by michael bustamante

i have a nice upper bed stainless trim for the longbed. i dont know how we`d ship it though

It's a long one, isn't it? Vendors/manufacturers must use a long mailing tube.

[michael bustamante]

its the full length of the bed so 8 feet. ill look for a tube if you like

[NC_John]

Originally Posted by michael bustamante

its the full length of the bed so 8 feet. ill look for a tube if you like

Hold off for the moment- like I told Ironhorse, I hope to find everything I need from one source. Otherwise shipping will probably kill me on all the separate pieces.

Thanks!

[NC_John]

Bump!

[73737373]

John,
The upper trim is easily packaged, protected and shipped using PVC pipe. More expensive, as well.

[scotts72heavyhalf]

I believe I have everything except the fender spears. I am taking the trim of my truck today to install NOS trim so I will let you know all of what I have this afternoon.

[NC_John]

Originally Posted by scotts72heavyhalf

I believe I have everything except the fender spears. I am taking the trim of my truck today to install NOS trim so I will let you know all of what I have this afternoon.

Ok, thanks

[NC_John]

Originally Posted by 73737373

John,
The upper trim is easily packaged, protected and shipped using PVC pipe. More expensive, as well.

That's a good idea. It might be cheaper to get some repop pieces and live with the mismatch so I don't take a beating on shipping.....

[scotts72heavyhalf]

I have all the driver side pieces and passenger side pieces except the fender spears. All the pieces are straight but some have a few small extra holes. Here is the lower door piece

[scotts72heavyhalf]

Behind drivers side rear wheel well and bumper

[scotts72heavyhalf]

Upper bed trim. No dents but has extra holes. I have both if you need

[scotts72heavyhalf]

Upper door pieces with no extra holes or dents they are nice and clean

[NC_John]

The upper door piece looks the best but that puts me in the same boat as with the other guys stuff- too much shipping expense for just a piece or two. I'm going to head over to the car and truck shop in the morning and maybe see what the two lower pieces I need look like from counterpart.

Thanks for the effort. How did your new stuff turn out?

[scotts72heavyhalf]

Originally Posted by NC_John

The upper door piece looks the best but that puts me in the same boat as with the other guys stuff- too much shipping expense for just a piece or two. I'm going to head over to the car and truck shop in the morning and maybe see what the two lower pieces I need look like from counterpart.

Thanks for the effort. How did your new stuff turn out?

I just got it all in today so I will put it on tomorrow, thanks for asking!