Wireharness clips on the Frame question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

tjsblazer · 11-01-2015, 09:47 PM

Hey how many wireharness clips are on the Lh frame rail on a 72 Blazer? The ones that both the fuel sending and rear lighting wires clip in to.
Also, does anyone have pics of where they go. I can't seem to find a drawing in the Assembly manual.
Thanks. Jeff.

72K5CSTDarkOlive · 11-02-2015, 01:28 AM

There was 3 of them that I pulled off mine

Minnz · 11-02-2015, 12:47 PM

Here are a couple pics from mine:

Minnz · 11-02-2015, 12:53 PM

One more:

hemi43 · 11-02-2015, 01:41 PM

Not sure if these pics will help, but I took these before I took the frame apart.

Edit; Oops, I just realized it was wiring clips you were concerned about and not brake line clips. Those are the only pics I had, sorry.

**jaros44sr** · 11-02-2015, 06:48 PM

Maybe someone can actually find the page in the assembly manual, I can'y

tjsblazer · 11-02-2015, 07:18 PM

Quote:

Originally Posted by 72K5CSTDarkOlive

There was 3 of them that I pulled off mine

I actually had 7 total and 2 of them were along the rear x-member for the Fuel sending wire. That would leave 5 along the frame rail if I had them all.

Quote:

Originally Posted by Minnz

Here are a couple pics from mine:

Thanks. That helps with a few of them.

Quote:

Originally Posted by hemi43

Not sure if these pics will help, but I took these before I took the frame apart.

Edit; Oops, I just realized it was wiring clips you were concerned about and not brake line clips. Those are the only pics I had, sorry.

Yeah I took ones of that side for the hard lines but never thought to take any of the Rh side for wires before I pulled it apart. Thanks though.

Quote:

Originally Posted by jaros44sr

Maybe someone can actually find the page in the assembly manual, I can'y

I can't find a page with it. I thought I looked through the whole manual. Might give it another shot.

Hopefully someone chimes in who has a survivor truck that has the factory clips still in place.

tjsblazer · 11-02-2015, 07:35 PM

Actually Minnz you've shown 4 different ones on your pics. Mine had 5 remaining along the side when I took it apart if that was all of them there is only one more spot. Don't know if my Bkazer still had them all or not.

**jaros44sr** · 11-02-2015, 07:42 PM

is this it?

WIN_20151102_183756 by [url=https://www.flickr.com/photos/97391199@N06/]

It measures .575 from front of assembly manual

tjsblazer · 11-02-2015, 07:47 PM

Quote:

Originally Posted by jaros44sr

is this it?

WIN_20151102_183756 by [url=https://www.flickr.com/photos/97391199@N06/]

Jim. I'm not sure cause the 2wd x-member in that picture threw me for a loop but I is the only page I ever saw in the manual.

**jaros44sr** · 11-02-2015, 08:09 PM

Quote:

Originally Posted by tjsblazer

Jim. I'm not sure cause the 2wd x-member in that picture threw me for a loop but I is the only page I ever saw in the manual.

Jeff, it says except for G&I-X

Minnz · 11-03-2015, 10:57 AM

Ok, I found another pic of a 5th clip. It was located above the driver's rear spring shackle:

tjsblazer · 11-03-2015, 08:06 PM

Well that may be it. Like I said mine had 7 total with 2 being on the back x-member. Maybe 5 is correct for down the frame rail. My truck was fairly stock except for a 4"lift. I'm going to use your pictures Minnz as reference for now. Thank you.

11-01-2015, 09:47 PM	#1
tjsblazer Registered User Join Date: Oct 2009 Location: Great White North Posts: 1,520	Wireharness clips on the Frame question Hey how many wireharness clips are on the Lh frame rail on a 72 Blazer? The ones that both the fuel sending and rear lighting wires clip in to. Also, does anyone have pics of where they go. I can't seem to find a drawing in the Assembly manual. Thanks. Jeff. __________________ Jeff. '72 Blazer K5 "Camshaft opinions are like belly buttons; everyone has one and no two are alike" My Blazer Build: http://67-72chevytrucks.com/vboard/s...d.php?t=626752 My Engine Build: http://67-72chevytrucks.com/vboard/s...d.php?t=637336

11-02-2015, 01:28 AM	#2
72K5CSTDarkOlive Registered User Join Date: Aug 2013 Location: Central Coast, CA Posts: 774	Re: Wireharness clips on the Frame question There was 3 of them that I pulled off mine __________________ My Build Thread 72 K5 http://67-72chevytrucks.com/vboard/s...d.php?t=628612 Build version 2.0: 72 K5 6.0 LQ9, 4L80e, NP205 http://67-72chevytrucks.com/vboard/s...d.php?t=793192 ____________________________________________ 1972 CST K5 Blazer Dark Olive

11-02-2015, 12:47 PM	#3
Minnz Registered User Join Date: Aug 2014 Location: Minneapolis, MN Posts: 254	Re: Wireharness clips on the Frame question Here are a couple pics from mine: Attached Images __________________ 72 Ochre Blazer 69 Camaro Z28 Garnet Red 48 Willys (rolled)

11-02-2015, 12:53 PM	#4
Minnz Registered User Join Date: Aug 2014 Location: Minneapolis, MN Posts: 254	Re: Wireharness clips on the Frame question One more: Attached Images __________________ 72 Ochre Blazer 69 Camaro Z28 Garnet Red 48 Willys (rolled)

11-02-2015, 01:41 PM	#5
hemi43 Registered User Join Date: Mar 2015 Location: Ontario Canada Posts: 1,526	Re: Wireharness clips on the Frame question Not sure if these pics will help, but I took these before I took the frame apart. Edit; Oops, I just realized it was wiring clips you were concerned about and not brake line clips. Those are the only pics I had, sorry. Attached Images

11-02-2015, 06:48 PM	#6
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,761	Re: Wireharness clips on the Frame question Maybe someone can actually find the page in the assembly manual, I can'y __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

11-02-2015, 07:35 PM	#8
tjsblazer Registered User Join Date: Oct 2009 Location: Great White North Posts: 1,520	Re: Wireharness clips on the Frame question Actually Minnz you've shown 4 different ones on your pics. Mine had 5 remaining along the side when I took it apart if that was all of them there is only one more spot. Don't know if my Bkazer still had them all or not. __________________ Jeff. '72 Blazer K5 "Camshaft opinions are like belly buttons; everyone has one and no two are alike" My Blazer Build: http://67-72chevytrucks.com/vboard/s...d.php?t=626752 My Engine Build: http://67-72chevytrucks.com/vboard/s...d.php?t=637336

11-02-2015, 07:42 PM	#9
jaros44sr Senior Member Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,761	Re: Wireharness clips on the Frame question is this it? WIN_20151102_183756 by [url=https://www.flickr.com/photos/97391199@N06/] It measures .575 from front of assembly manual __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

11-03-2015, 10:57 AM	#12
Minnz Registered User Join Date: Aug 2014 Location: Minneapolis, MN Posts: 254	Re: Wireharness clips on the Frame question Ok, I found another pic of a 5th clip. It was located above the driver's rear spring shackle: Attached Images __________________ 72 Ochre Blazer 69 Camaro Z28 Garnet Red 48 Willys (rolled)

11-03-2015, 08:06 PM	#13
tjsblazer Registered User Join Date: Oct 2009 Location: Great White North Posts: 1,520	Re: Wireharness clips on the Frame question Well that may be it. Like I said mine had 7 total with 2 being on the back x-member. Maybe 5 is correct for down the frame rail. My truck was fairly stock except for a 4"lift. I'm going to use your pictures Minnz as reference for now. Thank you. __________________ Jeff. '72 Blazer K5 "Camshaft opinions are like belly buttons; everyone has one and no two are alike" My Blazer Build: http://67-72chevytrucks.com/vboard/s...d.php?t=626752 My Engine Build: http://67-72chevytrucks.com/vboard/s...d.php?t=637336



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.