|
11-05-2015, 11:49 PM
|
#1 |
|
Registered User
Join Date: Oct 2015
Location: caldwell idaho
Posts: 40
|
how low on rallys?
here's my 72 with rallies my question is how low can I go with out it hitting the rim on the inside? it rubs right now ,I trimmed the lower control arm already it helped a bit but not much.i ordered two inch drop springs and it made it worse I have 3 inch drop spindles with the 15" rallies is the only answer is to get bigger rims? this pic is before installing the drop springs.
|
|
|
|
11-06-2015, 07:52 AM
|
#2 |
|
Registered User
Join Date: Jul 2010
Location: central michigan
Posts: 1,194
|
Re: how low on rallys?
Get the 6" rally wheel from a van and use them up front . I had a 5.5" drop in the front with no rubbing.
|
|
|
|
|
11-06-2015, 08:32 AM
|
#3 |
|
Registered User
Join Date: Jun 2014
Location: Grand Prairie,Texas
Posts: 50
|
Re: how low on rallys?
I ran into the same situation when I was lowering mine, I was running 15" Rallys and just last month went to 20" American Racing Rallys. I don't think you would have to go to 20" but that is what I did to clear the control arms and the inner wheel rims. The first picture is old rims and bottom is the new ones.
|
|
|
|
|
11-06-2015, 08:37 AM
|
#4 |
|
Registered User
Join Date: Jul 2010
Location: central michigan
Posts: 1,194
|
Re: how low on rallys?
I REALLY like those 20's!
|
|
|
|
|
11-06-2015, 08:48 AM
|
#5 |
|
Senior Member
 
Join Date: Nov 2014
Location: Colorado
Posts: 3,303
|
Re: how low on rallys?
I'll trade you a pair of 6"-7" wide Rallys for two of your wheels.
__________________
07' Extcab Silverado Z71 Silver Birch, 5.3L HO 71' Cheyenne C10 Hugger Orange on Saddle SWB Besides these two, too Many to count |
|
|
|
|
11-06-2015, 11:01 AM
|
#6 |
|
Registered User
Join Date: Oct 2013
Location: Alabama
Posts: 1,230
|
Re: how low on rallys?
my 67 is on bags and I'm running 6.5" rallies in the front with ECE spindles. full dump and no rub.
|
|
|
|
|
11-06-2015, 11:16 AM
|
#7 |
|
Hittin E-Z Street on Mud Tires
Join Date: Nov 2004
Location: Greenville, SC
Posts: 23,090
|
Re: how low on rallys?
Corvette Rallys, but same problem... went to 7" wheel in front.
__________________
Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride  American Born, Country by the Grace of God  1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications! |
|
|
|
|
11-06-2015, 11:19 AM
|
#8 |
|
Registered User
Join Date: Jun 2014
Location: Grand Prairie,Texas
Posts: 50
|
Re: how low on rallys?
Looks exactly like mine did. FYI good looking shop truck!
|
|
|
|
|
11-06-2015, 12:11 PM
|
#9 |
|
Registered User
Join Date: Oct 2015
Location: caldwell idaho
Posts: 40
|
Re: how low on rallys?
I am looking into a set of 20's right now but will the stock steel rims fit ? They should be alot skinnier.i love the look of my rallies but I also plan on airbags.
. |
|
|
|
|
11-06-2015, 12:19 PM
|
#10 | |
|
Registered User
Join Date: Oct 2015
Location: caldwell idaho
Posts: 40
|
Re: how low on rallys?
Quote:
|
|
|
|
|
|
11-06-2015, 10:20 PM
|
#11 |
|
Registered User
Join Date: Apr 2011
Location: formerly NY currentlyNC
Posts: 390
|
Re: how low on rallys?
does the control arm to 8 in ralley clearance issue only happen with drop spindles?
__________________
1970 short step c10 leaf spring 454 |
|
|
|
|
11-06-2015, 10:33 PM
|
#12 |
|
Registered User
Join Date: Apr 2015
Location: Abilene, TX
Posts: 136
|
Re: how low on rallys?
I'm no expert by any means but wheel to a arm distance is determined by wheel width and the amount of drop built into the drop spindle. The more drop built into the spindle the closer the rim will come to the a arm.
__________________
======================================== Dennis 37 ford coupe 68 short narrow 72 short wide |
|
|
|
|
11-06-2015, 10:39 PM
|
#13 |
|
Registered User
Join Date: Oct 2015
Location: caldwell idaho
Posts: 40
|
Re: how low on rallys?
I would say yes cause when I installed the lowered springs it got worse.it rubbed a bit with the drop spindles but when I installed the drop springs it got worse..
|
|
|
|
|
11-06-2015, 10:48 PM
|
#14 |
|
Registered User
Join Date: Apr 2015
Location: Abilene, TX
Posts: 136
|
Re: how low on rallys?
My truck is sitting on rallys now with 2 in drop spindles and air ride. I have about 1/4 in of clearance with the suspension as low as it will go. I've never checked to clearance with the suspension at ride height. It may change I don't know. I would cycle it through its range of motion and measure for you but my truck is 70 miles away right now.
__________________
======================================== Dennis 37 ford coupe 68 short narrow 72 short wide |
|
|
|
|
11-06-2015, 11:17 PM
|
#15 |
|
Registered User
Join Date: Oct 2015
Location: caldwell idaho
Posts: 40
|
Re: how low on rallys?
I think if I'd I had 2 to 21/2 drop spindles it would be ok but with 3 inch it's too much.
|
|
|
|
|
11-07-2015, 10:57 AM
|
#16 | |
|
Hittin E-Z Street on Mud Tires
Join Date: Nov 2004
Location: Greenville, SC
Posts: 23,090
|
Re: how low on rallys?
Quote:
__________________
Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications! |
|
|
|
|
|
11-07-2015, 11:05 AM
|
#17 |
|
Registered User
Join Date: Sep 2011
Location: Louisville, KY
Posts: 756
|
Re: how low on rallys?
I have 2.5" DS and no rubbing. I honestly don't know my wheel width or BS. They are at least 7" though.
|
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
