MO Parting a 69 C10 with small block and three on the tree. - Page 7 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**specialtyretail** · 11-15-2015, 10:11 AM

I should be done with it later this afternoon. Next Saturday would be great if that works for you.

Red1968 · 11-15-2015, 10:14 AM

Does the driver fender have any rust in the lower parts of it? Do you have the little rod/knob for the passenger side kick panel vent?

**specialtyretail** · 11-15-2015, 10:29 AM

Quote:

Originally Posted by Red1968

Does the driver fender have any rust in the lower parts of it? Do you have the little rod/knob for the passenger side kick panel vent?

Let me get you some pics here in a bit. I think the vent handle is still intact. Thanks, Fred.

**specialtyretail** · 11-15-2015, 10:56 AM

Here are some more pics of the front clip. The drivers fender has a very small rust spot at the trailing edge of the cup. The inner fenders are in a lot better shape than I thought they were. $150.00 for the whole thing, I am just needing it gone. I do have the passenger vent rod as well. Thanks, Fred.

Dagr8npwrfloz · 11-15-2015, 11:24 AM

I'm after the escutcheons off the door panels. If they're that aqua/teal green. It's hard to tell in the pics.

**specialtyretail** · 11-15-2015, 11:30 AM

Sorry, door panels went with the doors. Thanks, Fred.

crud · 11-15-2015, 12:13 PM

Forgive me if this has already been asked, but do you have the Parking Brake Levers from behind the drums and brake Self Adjuster Struts?
Thanks.

**specialtyretail** · 11-15-2015, 12:41 PM

Quote:

Originally Posted by crud

Forgive me if this has already been asked, but do you have the Parking Brake Levers from behind the drums and brake Self Adjuster Struts?
Thanks.

I do not think so but will check. Thanks, Fred.

**specialtyretail** · 11-15-2015, 12:45 PM

Quote:

Originally Posted by Red1968

Does the driver fender have any rust in the lower parts of it? Do you have the little rod/knob for the passenger side kick panel vent?

I have this. I can get it to you for $12.00 SOLD,,,, THANKS.... shipped. Thanks, Fred.

Red1968 · 11-15-2015, 12:48 PM

That will work. I will send the money thru PayPal in a few mins.

Thanks

**specialtyretail** · 11-15-2015, 01:24 PM

Quote:

Originally Posted by Red1968

That will work. I will send the money thru PayPal in a few mins.

Thanks

Got it, going out Monday. Thanks, Fred.

72c105speed · 11-15-2015, 02:29 PM

Do you have the upper alternator bracket?

**specialtyretail** · 11-15-2015, 02:52 PM

Quote:

Originally Posted by 72c105speed

Do you have the upper alternator bracket?

You mean the swing arm, that mounts it on the drivers side?? Thanks, Fred.

72c105speed · 11-15-2015, 03:28 PM

Quote:

Originally Posted by specialtyretail

You mean the swing arm, that mounts it on the drivers side?? Thanks, Fred.

That be it!

**specialtyretail** · 11-15-2015, 03:38 PM

Quote:

Originally Posted by 72c105speed

That be it!

I have this. $10.00 SOLD,,,, THANKS.... shipped.

**specialtyretail** · 11-15-2015, 03:46 PM

DONE.... Got everything pulled, i am going to reply to everyone that asked about parts. I think i pulled everything everyone asked about. It is ready to go to Kentucky next weekend. My driveway will be empty,,, damn...

**specialtyretail** · 11-15-2015, 04:32 PM

SOLD,,,, THANKS.... Here is all the clutch and shifter linkages, wanting to sell together. It all needs a good cleaning, but was from a running driving truck. $85.00 shipped for all of it. Thanks, Fred.

Firefighterkk · 11-15-2015, 09:19 PM

Quote:

Originally Posted by specialtyretail

As fond as i am of my friends in Oklahoma, I just am not able to ship the big parts like this. Thanks, Fred.

How much if I pickup the grill? Might cruise over one afternoon.

**specialtyretail** · 11-15-2015, 09:22 PM

Quote:

Originally Posted by Firefighterkk

How much if I pickup the grill? Might cruise over one afternoon.

Man, if you want to drive all the way to the Mississippi River for a grill, I will sell it to you for $70.00. I want to sell it, but I bet there are some closer to you. Thanks, Fred.

Firefighterkk · 11-15-2015, 09:27 PM

Quote:

Originally Posted by specialtyretail

Man, if you want to drive all the way to the Mississippi River for a grill, I will sell it to you for $70.00. I want to sell it, but I bet there are some closer to you. Thanks, Fred.

I've checked around and can't seem to find anything. Tom Meyer here in Miami doesn't have anything worth using. Just weighing out my options at the moment. Let me do some more checking. Any major imperfections in the grill that weren't visible in the pictures?

colgad · 11-15-2015, 10:07 PM

Did you get a chance to price the pedals for me? Zip 33548
Dave
Colgad

**specialtyretail** · 11-15-2015, 11:22 PM

Quote:

Originally Posted by colgad

Did you get a chance to price the pedals for me? Zip 33548
Dave
Colgad

Hey Dave. $75.00 shipped to your front door. Thanks, Fred.

Douglas · 11-15-2015, 11:27 PM

Fred I don't need the two rods that go to the trans. Will you take 50.00 for the rest of it?
Thanks
Doug

**specialtyretail** · 11-15-2015, 11:54 PM

Quote:

Originally Posted by Douglas

Fred I don't need the two rods that go to the trans. Will you take 50.00 for the rest of it?
Thanks
Doug

Hey Doug. If it will help, I would go $60.00 shipped and I keep the long rods. Thanks, Fred.

colgad · 11-15-2015, 11:56 PM

Quote:

Originally Posted by specialtyretail

Hey Dave. $75.00 shipped to your front door. Thanks, Fred.

Done!
Thanks
Dave

11-15-2015, 10:11 AM	#151
specialtyretail So,, what else you got??? Join Date: May 2010 Location: Jackson, Mo Posts: 18,635	Re: Parting a 69 C10 with small block and three on the tree. I should be done with it later this afternoon. Next Saturday would be great if that works for you. __________________ Our paypal is specialtyretail@yahoo.com Please DO NOTsend paypal funds as a gift, right is right. Thanks.... Sorry, we CANNOT ship larger parts. Thanks.

11-15-2015, 10:14 AM	#152
Red1968 Registered User Join Date: Oct 2013 Location: Ripley TN Posts: 57	Re: Parting a 69 C10 with small block and three on the tree. Does the driver fender have any rust in the lower parts of it? Do you have the little rod/knob for the passenger side kick panel vent?

11-15-2015, 10:56 AM	#154
specialtyretail So,, what else you got??? Join Date: May 2010 Location: Jackson, Mo Posts: 18,635	Re: Parting a 69 C10 with small block and three on the tree. Here are some more pics of the front clip. The drivers fender has a very small rust spot at the trailing edge of the cup. The inner fenders are in a lot better shape than I thought they were. $150.00 for the whole thing, I am just needing it gone. I do have the passenger vent rod as well. Thanks, Fred. Attached Images __________________ Our paypal is specialtyretail@yahoo.com Please DO NOTsend paypal funds as a gift, right is right. Thanks.... Sorry, we CANNOT ship larger parts. Thanks.

11-15-2015, 11:24 AM	#155
Dagr8npwrfloz Registered User Join Date: Oct 2015 Location: Mogadore Posts: 100	Re: Parting a 69 C10 with small block and three on the tree. I'm after the escutcheons off the door panels. If they're that aqua/teal green. It's hard to tell in the pics. __________________ The ol man's 1968 c10 fleetside 327 bone stock w/ 2bbl 503 light green 2 tone

11-15-2015, 11:30 AM	#156
specialtyretail So,, what else you got??? Join Date: May 2010 Location: Jackson, Mo Posts: 18,635	Re: Parting a 69 C10 with small block and three on the tree. Sorry, door panels went with the doors. Thanks, Fred. __________________ Our paypal is specialtyretail@yahoo.com Please DO NOTsend paypal funds as a gift, right is right. Thanks.... Sorry, we CANNOT ship larger parts. Thanks.

11-15-2015, 12:13 PM	#157
crud Registered User Join Date: Sep 2015 Location: Branson, Mo Posts: 16	Re: Parting a 69 C10 with small block and three on the tree. Forgive me if this has already been asked, but do you have the Parking Brake Levers from behind the drums and brake Self Adjuster Struts? Thanks.

11-15-2015, 12:48 PM	#160
Red1968 Registered User Join Date: Oct 2013 Location: Ripley TN Posts: 57	Re: Parting a 69 C10 with small block and three on the tree. That will work. I will send the money thru PayPal in a few mins. Thanks

11-15-2015, 02:29 PM	#162
72c105speed Registered User Join Date: Oct 2015 Location: Kentucky Posts: 172	Re: Parting a 69 C10 with small block and three on the tree. Do you have the upper alternator bracket?

11-15-2015, 03:46 PM	#166
specialtyretail So,, what else you got??? Join Date: May 2010 Location: Jackson, Mo Posts: 18,635	Re: Parting a 69 C10 with small block and three on the tree. DONE.... Got everything pulled, i am going to reply to everyone that asked about parts. I think i pulled everything everyone asked about. It is ready to go to Kentucky next weekend. My driveway will be empty,,, damn... Attached Images __________________ Our paypal is specialtyretail@yahoo.com Please DO NOTsend paypal funds as a gift, right is right. Thanks.... Sorry, we CANNOT ship larger parts. Thanks.

11-15-2015, 04:32 PM	#167
specialtyretail So,, what else you got??? Join Date: May 2010 Location: Jackson, Mo Posts: 18,635	Re: Parting a 69 C10 with small block and three on the tree. SOLD,,,, THANKS.... Here is all the clutch and shifter linkages, wanting to sell together. It all needs a good cleaning, but was from a running driving truck. $85.00 shipped for all of it. Thanks, Fred. Attached Images __________________ Our paypal is specialtyretail@yahoo.com Please DO NOTsend paypal funds as a gift, right is right. Thanks.... Sorry, we CANNOT ship larger parts. Thanks. Last edited by specialtyretail; 11-16-2015 at 10:49 AM.

11-15-2015, 10:07 PM	#171
colgad Registered User Join Date: Jun 2006 Location: Lutz, Florida Posts: 838	Re: Parting a 69 C10 with small block and three on the tree. Did you get a chance to price the pedals for me? Zip 33548 Dave Colgad __________________ 1967 Red, C10 Short Bed 6.0L T5 5 speed 1967 Orange and Black C50 6.2 Detroit Diesel NV4500, 2 Ton Pickup 1972 White, Chevy Blazer 2WD 67 Dog house 5.3 4L65 2016 Power Tour LH 1955 Red-Cream, Chevrolet Nomad, restoration on hold 2004 Black, Corvette Z06 LS6 convertible (Rock solid Fun) 2011/2018 Power Tour

11-15-2015, 11:27 PM	#173
Douglas Registered User Join Date: Jul 2009 Location: Ruston,Louisiana Posts: 113	Re: Parting a 69 C10 with small block and three on the tree. Fred I don't need the two rods that go to the trans. Will you take 50.00 for the rest of it? Thanks Doug



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.