TN Cab Pieces/Parts

[rickoner]

Originally Posted by DPowers

I will have to remove the rear window to get that piece. How about $15.00 plus whatever shipping would be?

That works for me. Hopefully it's solid behind there. It seems to be another common spot for rot on there trucks too.

[DPowers]

I plan on cutting these pieces this weekend weather permitting so we shall see.

[62jimmy]

Originally Posted by DPowers

Radio is hacked if I remember right.
How about $10.00 plus whatever shipping would be for the rocker piece?

Sounds good, just let me know the total when you get it and I have paypal if that works,

Thanks,
Jeremy

[60chevyjim]

hi how about the windshield chrome moldings .
in in nc. thanks jim

[DPowers]

Originally Posted by 60chevyjim

hi how about the windshield chrome moldings .
in in nc. thanks jim

I believe they are in good shape. Let me get them removed and go from there.

[60chevyjim]

Originally Posted by DPowers

I believe they are in good shape. Let me get them removed and go from there.

sounds good thanks

[DPowers]

Originally Posted by DPowers

I will have to remove the rear window to get that piece. How about $15.00 plus whatever shipping would be?

Cut the piece today. PM me address and I will get a shipping cost.

[DPowers]

Originally Posted by 62jimmy

Sounds good, just let me know the total when you get it and I have paypal if that works,

Thanks,
Jeremy

Is this what you were needing/wanting?

[DPowers]

Originally Posted by Mikes66ChevyC10

Sounds good to me. Thanks again for doing this. This spot is the last area of rust on the cab that needs to be fixed then all the rust repair is done!

Cut the piece today. Will this work for you? PM me your address and I will get you a quote. Going to be a bit heavier as the gas tank bracket is attached.

[DPowers]

Originally Posted by DPowers

Alright will see what I can do $20.00 plus shipping? I have a son that lives in Louisville and if he comes down for Christmas and I can get it cut out in time, I can see if can send it back with him, but will keep you posted.

Cut this piece today. Let me know if works for you. I had emailed you about the fender as well. My son has went back, so not an option there.

[DPowers]

Originally Posted by chad64chevy

here is a better picture! I just measured from the top bolt hole for the rear view mirror 9" each side! I need the lip the windshield an everything inside the blue tape, thanks!!

Went to cut this piece today and there are pin holes through, so I didn't go any farther. Sorry.

[DPowers]

Originally Posted by LostMy65

I need two of these cab mounting washers:

Checked todaY. The ones on the cab were toast.

[DPowers]

Originally Posted by 60chevyjim

sounds good thanks

Pulled it today. Have both clips. No dents that I could find, but will need cleaned up. $120.00 shipped is what I would ask.

[chad64chevy]

Originally Posted by DPowers

Went to cut this piece today and there are pin holes through, so I didn't go any farther. Sorry.

I kind of figured seeing that a lot of these trucks get mice nest up there. thank you for looking! and again for the bumper guards I got from you awhile back

[DPowers]

No problem. I will keep you in mind in case I run across a good piece. Glad you are happy with the guards.

[62jimmy]

Originally Posted by DPowers

Is this what you were needing/wanting?

Looks like it will work well, Thanks, sending pm with address...

[rickoner]

Originally Posted by DPowers

Cut the piece today. PM me address and I will get a shipping cost.

Can't tell from the pics but is the inner panel solid? Any rust scaling? I'm concerned about the curve right above the window opening. If its all good, I'll take it.

[DPowers]

Originally Posted by rickoner

Can't tell from the pics but is the inner panel solid? Any rust scaling? I'm concerned about the curve right above the window opening. If its all good, I'll take it.

PM sent

[60chevyjim]

Originally Posted by DPowers

Pulled it today. Have both clips. No dents that I could find, but will need cleaned up. $120.00 shipped is what I would ask.

hi that sounds good ,
I get payed every other week .
so my next pay is on the 8th of jan.
email me so we can work out
the payment and shipping details ok
thanks jim
chevyjim1960@aol.com

[DPowers]

Originally Posted by DPowers

Cut the piece today. Will this work for you? PM me your address and I will get you a quote. Going to be a bit heavier as the gas tank bracket is attached.

I pm'd you. went to trim it up some for shipping and these appeared. you let me know if it will be enough or not.

[60chevyjim]

Originally Posted by DPowers

Pulled it today. Have both clips. No dents that I could find, but will need cleaned up. $120.00 shipped is what I would ask.

sending $ paypal for the moldings

[60chevyjim]

pp payment sent for $123.00

[DPowers]

Got it- thanks

[inkfamous13]

Roof skin inner & outer available? Inner just need center to patch sunroof

[DPowers]

Originally Posted by inkfamous13

Roof skin inner & outer available? Inner just need center to patch sunroof

Sorry- cab is scrapped.