1969 Chevy SWB Fleetside truck project

[C10Squared]

I had 2 buyers for the truck, but things didn't work out for either one to come get it, so I'm posting this again.
I was planning to do a frame up resto, but I:
1. don't have the time with 2 kids, a wife, etc...
2. am finishing my basement and need the space
3. need to get my GN ready for the nats in May.
-The truck was in good running condition when I picked it up.
-The attached picture is from the day I got it a few months ago.
Here are the particulars:
Good '69 VIN.
-The original cab has rust in the regular spots
-Doors are decent, but have a couple of small rust spots at the bottoms (not the ones pictured)
-Engine is a 350 that was rebuilt in Feb of last year, but only has 2 months of use on it.
-Truck is an auto with a good tranny and also has PS and PB.
-I have a good bed floor in epoxy primer that just needs a little more work on some pits (no holes).
-2 bench seats (one not so good, but the other just needs a new cover).
-2 CST door panels
-2 gauge clusters (one with ALL gauges working)
-all glass is good.
Basically just needs fenders, bedsides, a tailgate, and grille to put back together
***All nuts/bolts/parts removed from the truck are bagged and labled for reassembly.

-$2200 invested.
Price: $1000 for all including service manual, etc...

Or, if someone has some nice Torq Thrust II wheels/tires in a 17x8 with 4" BS, I would work a trade.



Please call (770)537-9780 or email if interested.

[C10Squared]

I'd actually trade it for just about anything smaller than the truck so that I can clear out my garage.

Air compressor
mig welder
dirt bikes
Wood working tools, etc...
Arcade game cabinets
As you can see, I'm not real picky. Just trying to clear out the garage so that I can paint the walls/floor/baseboard in time for spring.

[MAC67]

have you still got that grill and would you sell it ?

[C10Squared]

I sold the grille to Jaques Dean. It was a very good one for a driver, but not suitable for a show truck.

I'll try to get back with everyone that emailed me today sometime.

[C10Squared]

Oh yeah, would also trade down for a utility trailer for my 4 wheelers or a car trailer for my GN.

[MrGoodpliers]

When you say "needs fenders, bedsides, tailgate and grille" does that mean you no longer have these parts?

[C10Squared]

Yes, since I was planning a full resto, rusty parts were pulled and sold/traded to Jaques dean. I figured that the fenders are only $100 or so each and I would just suck it up on the new bedsides.

[C10Squared]

ttt

[Number98]

Hey man, where in the ATL are you located? You have any pictures of the trucks current state?

Jason

[C10Squared]

I'm in Bremen, about 40 miles west of downtown off of I20.
The second picture is pretty much what it looks like right now except I have since pulled the steering column.
If I don't sell it soon, I may just part it out since I can probably get close to what I'm asking for just the rebuilt 350 and auto tranny. I've just been too lazy to pull them out of the truck.

[Number98]

What about the cab? Where does it have rust? Did the truck have A/C? I have a 71 shortbed and have been looking for a nice cab.

Jason

[C10Squared]

No luck here. The cab needs the usual corners, rockers, and pans.

[vtblazer]

Wish I had seen the "trade for trailer" part earlier, I have an awesome aluminum 6x13 trailer that's perfect for three ATV's
I would have traded with you in a heart beat.

[C10Squared]

Originally posted by vtblazer
Wish I had seen the "trade for trailer" part earlier, I have an awesome aluminum 6x13 trailer that's perfect for three ATV's
I would have traded with you in a heart beat.

Me too. It would make things much easier than having to make 2 trips every time we want to go riding .

[vtblazer]

What's left? Anything?

[C10Squared]

It still has everything except for the bedsides, tailgate, fenders, and grille, all of which I was going to replace with new stuff.