Parting out 78 Blazer! - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*1FaastC10* · 02-27-2004, 07:47 PM

Quote:

Originally posted by 8t42wdburb
1/2 ton or3/4 ton?

Blazers only come one way, 1/2 ton.

alf4444 · 02-28-2004, 03:30 AM

yup! blazers only came as 1/2 tons but there is a guy local here parting out a 3/4 ton truck what were you looking for?

8t42wdburb · 02-28-2004, 03:53 AM

how much for the rear end and suspension front and rear

alf4444 · 02-28-2004, 04:06 AM

Define suspension

The axles are spoken for but I do have a rear dana 60. If you mean leafs when you say suspension the rears are going on my blazer but I do have 2 1/2" front spings and rear blocks I could sell for $100

8t42wdburb · 02-28-2004, 04:32 PM

do u know if 1/2 ton springs will swap into a 3/4 ton

*1FaastC10* · 02-29-2004, 04:36 AM

yes they will, just make sure the rear springs are the same length.

ronsk10 · 02-29-2004, 03:08 PM

would the power steering box fit a 85 k10 if so how much do you want for it? Thanks

*1FaastC10* · 03-01-2004, 01:19 AM

dont mean to keep answering your questions alf, but i'll go ahead anyways.

Ron, yes the box will "fit" but the fittings on your existing lines will be different, thus you'll have to replace them with the standard fitting lines (yours are metric), and with replacing the lines, you have to replace the pump too.

alf4444 · 03-01-2004, 11:19 AM

No problem, It saves me time. Springs will fit the fronts are for sale and they are 2 1/2 lift spring, no Idea what brand, $100 + ride (last set was around $45) And the steering box is staying on the frame which is going under my buddies 54 willeys.

**Captkaos** · 03-22-2004, 07:46 PM

Any news on the rear outside seatbelts?

highboy_04 · 03-29-2004, 03:15 AM

what tranny does it have. and if it has one and you want to get rid of it how much?

alf4444 · 03-29-2004, 07:37 PM

Capt Sorry no go on the belts (toorusted to get out) but I'm keeping my eyes open for you.

Highboy the drivetrain is gone but I do have a good SM465 and I am picking up a np205 tonight if anyone needs one.

02-28-2004, 03:30 AM	#27
alf4444 Registered User Join Date: Dec 2002 Location: taylorsville, UT Posts: 778	yup! blazers only came as 1/2 tons but there is a guy local here parting out a 3/4 ton truck what were you looking for? __________________ 2011 CCSB GMC 2500HD DMAX 73 GMC 3/4 ton 4x4 96 Chevy 1500 STD Cab Shortbed Z71 Owner of WickedWolfRC.com

02-28-2004, 04:06 AM	#29
alf4444 Registered User Join Date: Dec 2002 Location: taylorsville, UT Posts: 778	Define suspension The axles are spoken for but I do have a rear dana 60. If you mean leafs when you say suspension the rears are going on my blazer but I do have 2 1/2" front spings and rear blocks I could sell for $100 __________________ 2011 CCSB GMC 2500HD DMAX 73 GMC 3/4 ton 4x4 96 Chevy 1500 STD Cab Shortbed Z71 Owner of WickedWolfRC.com

03-01-2004, 11:19 AM	#34
alf4444 Registered User Join Date: Dec 2002 Location: taylorsville, UT Posts: 778	No problem, It saves me time. Springs will fit the fronts are for sale and they are 2 1/2 lift spring, no Idea what brand, $100 + ride (last set was around $45) And the steering box is staying on the frame which is going under my buddies 54 willeys. __________________ 2011 CCSB GMC 2500HD DMAX 73 GMC 3/4 ton 4x4 96 Chevy 1500 STD Cab Shortbed Z71 Owner of WickedWolfRC.com

03-22-2004, 07:46 PM	#35
Captkaos www.73-87chevytrucks.com Join Date: Dec 1999 Location: Birmingham, AL Posts: 6,935	Any news on the rear outside seatbelts? __________________ Chris Lucas 1973 Chevy C-10 1978 GMC Jimmy (2WD) - SOLD 1987 R10 twin turbo LS 1991 R3500 SRW CrewCab 1985 K5 diesel swapped project 1989 K5 2WD conversion w/ Vette susp Project Captkaos Customs 73-87chevytrucks.com

03-29-2004, 03:15 AM	#36
highboy_04 Registered User Join Date: Mar 2003 Location: kansas Posts: 1,071	what tranny does it have. and if it has one and you want to get rid of it how much? __________________ '67 c10 350/th350

02-28-2004, 03:53 AM	#28
8t42wdburb Registered User Join Date: Feb 2004 Location: washington st Posts: 23	how much for the rear end and suspension front and rear

02-28-2004, 04:32 PM	#30
8t42wdburb Registered User Join Date: Feb 2004 Location: washington st Posts: 23	do u know if 1/2 ton springs will swap into a 3/4 ton

02-29-2004, 04:36 AM	#31
1FaastC10 Account Suspended Join Date: Oct 2002 Location: Elkhart, IN Posts: 6,399	yes they will, just make sure the rear springs are the same length.

02-29-2004, 03:08 PM	#32
ronsk10 Registered User Join Date: Jun 2003 Location: Scotland Neck NC Posts: 316	would the power steering box fit a 85 k10 if so how much do you want for it? Thanks

03-01-2004, 01:19 AM	#33
1FaastC10 Account Suspended Join Date: Oct 2002 Location: Elkhart, IN Posts: 6,399	dont mean to keep answering your questions alf, but i'll go ahead anyways. Ron, yes the box will "fit" but the fittings on your existing lines will be different, thus you'll have to replace them with the standard fitting lines (yours are metric), and with replacing the lines, you have to replace the pump too.

03-29-2004, 07:37 PM	#37
alf4444 Registered User Join Date: Dec 2002 Location: taylorsville, UT Posts: 778	Capt Sorry no go on the belts (toorusted to get out) but I'm keeping my eyes open for you. Highboy the drivetrain is gone but I do have a good SM465 and I am picking up a np205 tonight if anyone needs one. __________________ 2011 CCSB GMC 2500HD DMAX 73 GMC 3/4 ton 4x4 96 Chevy 1500 STD Cab Shortbed Z71 Owner of WickedWolfRC.com



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.