The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > All 4x4 Tech & Off Roading > 4x4 Projects and Builds

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 01-11-2016, 11:03 PM   #501
mjensen
Registered User
 
mjensen's Avatar
 
Join Date: Jun 2006
Location: Utah
Posts: 1,562
Re: 72 K30 Build

Looking good Brett! You'll probably have this thing on the road years before me
__________________
Mike

'69 GMC 3/4 ton 4x4 Build Thread
mjensen is offline   Reply With Quote
Old 01-12-2016, 11:29 AM   #502
7dee2
Registered User
 
7dee2's Avatar
 
Join Date: May 2011
Location: Syracuse, Utah
Posts: 1,986
Re: 72 K30 Build

Thanks Mike! We are shooting to be done before the end of this year I’m jonesing to drive it.

And some pics of this diff painted and back under the frame. Looks kind of silver with the flash in the pics but it is actually a cast iron gray.
Attached Images
   
__________________
Brett
67 Camaro SS: 67 Camaro Build
72 Cheyenne/C10 Super 115" Fleetside: 72 C10 Build
72 Cheyenne/K30 Super 133" Longhorn DRW: 72 K30 Build SOLD

YouTube: https://www.youtube.com/@6dee7-7dee2
7dee2 is offline   Reply With Quote
Old 01-13-2016, 11:29 AM   #503
7dee2
Registered User
 
7dee2's Avatar
 
Join Date: May 2011
Location: Syracuse, Utah
Posts: 1,986
Re: 72 K30 Build

We dug this stuff out and dropped it off at the machine shop the other day. It’s the start to a 489 stroker motor for this truck, this 454 4bolt block with a set of bare 049 oval port heads I’ve had tucked away. It's currently .020 over and will be fit to a new set of forged .030 over pistons. Heads will be left as cast except for a little larger valve (2.19 & 1.88’s) that are being added.
Attached Images
   
__________________
Brett
67 Camaro SS: 67 Camaro Build
72 Cheyenne/C10 Super 115" Fleetside: 72 C10 Build
72 Cheyenne/K30 Super 133" Longhorn DRW: 72 K30 Build SOLD

YouTube: https://www.youtube.com/@6dee7-7dee2
7dee2 is offline   Reply With Quote
Old 01-14-2016, 12:26 PM   #504
7dee2
Registered User
 
7dee2's Avatar
 
Join Date: May 2011
Location: Syracuse, Utah
Posts: 1,986
Re: 72 K30 Build

All the guts have showed up for our 489 over the last few days. It should make for a pretty torquey setup, cam comes on right off idle and pulls to around 5200. Kept the compression low at about 9.25 to 1, hoping it will run on crappy gas cuz I’m sure it’ll be thirsty!
Attached Images
    
__________________
Brett
67 Camaro SS: 67 Camaro Build
72 Cheyenne/C10 Super 115" Fleetside: 72 C10 Build
72 Cheyenne/K30 Super 133" Longhorn DRW: 72 K30 Build SOLD

YouTube: https://www.youtube.com/@6dee7-7dee2
7dee2 is offline   Reply With Quote
Old 01-14-2016, 12:49 PM   #505
rgunlock
Senior Member
 
rgunlock's Avatar
 
Join Date: Jul 2009
Location: Tomball, Texas
Posts: 1,592
Re: 72 K30 Build

That's going to be a beast!
__________________
Rick

78 GMC K15 SWB, 350/NV4500/NP205/4.10s Project Hazel
71 GMC C25 350/TH400 - Project Angie
59 Chevy SWB Stepside (next in line? Not sure now )
2001 GMC Sierra K2500
rgunlock is offline   Reply With Quote
Old 01-14-2016, 04:33 PM   #506
Dieselwrencher
6>8 Plugless........
 
Dieselwrencher's Avatar
 
Join Date: Sep 2007
Location: Prairie City, Ia
Posts: 17,142
Re: 72 K30 Build

That's going to be a pretty stout engine! Yeah, thirsty isn't the word I'd use.
__________________
Ryan
1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread
1972 GMC Sierra Grande Longhorn 4x4
1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed
1972 C10 Suburban Custom Deluxe
1969 Chevy milk truck
1971 Camaro RS 5.3 BTR STG3 Cam Super T10
1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project


Tired of spark plugs? Check this out.
Dieselwrencher is offline   Reply With Quote
Old 01-17-2016, 11:42 AM   #507
7dee2
Registered User
 
7dee2's Avatar
 
Join Date: May 2011
Location: Syracuse, Utah
Posts: 1,986
Re: 72 K30 Build

Quote:
Originally Posted by rgunlock View Post
That's going to be a beast!
Quote:
Originally Posted by Dieselwrencher View Post
That's going to be a pretty stout engine! Yeah, thirsty isn't the word I'd use.
Thinking it's going to be a fun truck to drive and gas is going to be cheap forever right?
__________________
Brett
67 Camaro SS: 67 Camaro Build
72 Cheyenne/C10 Super 115" Fleetside: 72 C10 Build
72 Cheyenne/K30 Super 133" Longhorn DRW: 72 K30 Build SOLD

YouTube: https://www.youtube.com/@6dee7-7dee2
7dee2 is offline   Reply With Quote
Old 01-17-2016, 01:18 PM   #508
ryanroo
Senior Member
 
ryanroo's Avatar
 
Join Date: Apr 2004
Location: sw colorado
Posts: 2,720
Re: 72 K30 Build

Quote:
Originally Posted by 7dee2 View Post
Thinking it's going to be a fun truck to drive and gas is going to be cheap forever right?
sweet! double sweet! i love big blocks.

people often ask or comment on the consumption of fuel in my given vehicle for the day. it always sucks, but if i add up all the hours of my life spent in the drivers seat of some vehicle i own, i figure it more than worth it to spend that time i cant ever get back driving something sweet. i just put gas in it when it needs it and laugh at all the truck payments i see driving around.
__________________
72 K20 12v build
72 K20 "parts truck"

ryanroo is offline   Reply With Quote
Old 01-18-2016, 12:26 PM   #509
7dee2
Registered User
 
7dee2's Avatar
 
Join Date: May 2011
Location: Syracuse, Utah
Posts: 1,986
Re: 72 K30 Build

Thanks Ryan, ditto on big blocks and truck payments I can’t believe the price tag on a new 4x4 these days!

We ordered some replacement inner axles a while ago and received the wrong lh side so after returning it to the vendor I got one of their aftermarket axles. Not really what I wanted but couldn’t seem to locate a Spicer axle for that side. Kept looking and lucked out finding one on ebay the Spicer distributor just happens to be about 30 minutes from our house, score! Here are some comparison pics of the original and the new snow plow axle with the aftermarket piece.
Attached Images
    
__________________
Brett
67 Camaro SS: 67 Camaro Build
72 Cheyenne/C10 Super 115" Fleetside: 72 C10 Build
72 Cheyenne/K30 Super 133" Longhorn DRW: 72 K30 Build SOLD

YouTube: https://www.youtube.com/@6dee7-7dee2
7dee2 is offline   Reply With Quote
Old 01-19-2016, 10:45 AM   #510
7dee2
Registered User
 
7dee2's Avatar
 
Join Date: May 2011
Location: Syracuse, Utah
Posts: 1,986
Re: 72 K30 Build

Our axle shafts are back together and ready to install.
Attached Images
    
__________________
Brett
67 Camaro SS: 67 Camaro Build
72 Cheyenne/C10 Super 115" Fleetside: 72 C10 Build
72 Cheyenne/K30 Super 133" Longhorn DRW: 72 K30 Build SOLD

YouTube: https://www.youtube.com/@6dee7-7dee2
7dee2 is offline   Reply With Quote
Old 01-20-2016, 11:38 AM   #511
7dee2
Registered User
 
7dee2's Avatar
 
Join Date: May 2011
Location: Syracuse, Utah
Posts: 1,986
Re: 72 K30 Build

Big news, we have located a replacement bare D60 housing and it’s on the way! Coming from the east coast and the seller claims it’s not a rusty old boat anchor, bonus! Some more progress our front hubs did get the new races installed.

Our preformed brake (84 K35 http://67-72chevytrucks.com/vboard/s...&postcount=379) & straight bulk fuel line showed up last month from Inline Tube. There’s also two L72 fuel pump to carb fuel lines with the y-blocks in there somewhere. It’s tubing time again!
Attached Images
  
__________________
Brett
67 Camaro SS: 67 Camaro Build
72 Cheyenne/C10 Super 115" Fleetside: 72 C10 Build
72 Cheyenne/K30 Super 133" Longhorn DRW: 72 K30 Build SOLD

YouTube: https://www.youtube.com/@6dee7-7dee2
7dee2 is offline   Reply With Quote
Old 01-25-2016, 09:34 AM   #512
deejaaa1
Registered User
 
Join Date: May 2015
Location: texas
Posts: 253
Re: 72 K30 Build

what the project. i have a hard time just replacing vacuum hoses. looking good.
__________________
Black 93 CCLB 3500 6.5 diesel, GV OD, TCI Ez-TCU controlled 4L80E, back on road 10/25/16 after sitting 4 years.
96 ECLB 2500, 6.5 diesel, auto, gone.
Quote:
Originally Posted by gottattooz View Post
...68 Chevy Shortbed... guy clearcoated..and...threw glitter all over it...like he was feeding chickens!!!...
deejaaa1 is offline   Reply With Quote
Old 01-25-2016, 12:16 PM   #513
7dee2
Registered User
 
7dee2's Avatar
 
Join Date: May 2011
Location: Syracuse, Utah
Posts: 1,986
Re: 72 K30 Build

Thanks deejaaa1!

Looks like a mummy showed up at the front door, so far it looks pretty good and at least neither of the king pin cones are hanging half way out!
Attached Images
   
__________________
Brett
67 Camaro SS: 67 Camaro Build
72 Cheyenne/C10 Super 115" Fleetside: 72 C10 Build
72 Cheyenne/K30 Super 133" Longhorn DRW: 72 K30 Build SOLD

YouTube: https://www.youtube.com/@6dee7-7dee2
7dee2 is offline   Reply With Quote
Old 01-25-2016, 12:35 PM   #514
rgunlock
Senior Member
 
rgunlock's Avatar
 
Join Date: Jul 2009
Location: Tomball, Texas
Posts: 1,592
Re: 72 K30 Build

Fingers crossed on this one for you Brett!
__________________
Rick

78 GMC K15 SWB, 350/NV4500/NP205/4.10s Project Hazel
71 GMC C25 350/TH400 - Project Angie
59 Chevy SWB Stepside (next in line? Not sure now )
2001 GMC Sierra K2500
rgunlock is offline   Reply With Quote
Old 01-26-2016, 12:06 PM   #515
7dee2
Registered User
 
7dee2's Avatar
 
Join Date: May 2011
Location: Syracuse, Utah
Posts: 1,986
Re: 72 K30 Build

Thanks Rick I hope so, one local vendor wanted $800 for a bare housing or $3200 complete & rebuilt!

Took a wire wheel and gave it the once over, cleaned up pretty good still need to knock out the axle seals but didn’t see any issues. Next stop is a date with a hot tank.
Attached Images
   
__________________
Brett
67 Camaro SS: 67 Camaro Build
72 Cheyenne/C10 Super 115" Fleetside: 72 C10 Build
72 Cheyenne/K30 Super 133" Longhorn DRW: 72 K30 Build SOLD

YouTube: https://www.youtube.com/@6dee7-7dee2
7dee2 is offline   Reply With Quote
Old 01-26-2016, 03:55 PM   #516
Dieselwrencher
6>8 Plugless........
 
Dieselwrencher's Avatar
 
Join Date: Sep 2007
Location: Prairie City, Ia
Posts: 17,142
Re: 72 K30 Build

Nice score on the D60 housing!
__________________
Ryan
1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread
1972 GMC Sierra Grande Longhorn 4x4
1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed
1972 C10 Suburban Custom Deluxe
1969 Chevy milk truck
1971 Camaro RS 5.3 BTR STG3 Cam Super T10
1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project


Tired of spark plugs? Check this out.
Dieselwrencher is offline   Reply With Quote
Old 01-27-2016, 10:59 AM   #517
7dee2
Registered User
 
7dee2's Avatar
 
Join Date: May 2011
Location: Syracuse, Utah
Posts: 1,986
Re: 72 K30 Build

Thanks DW, ebay can sure be a great thing! Our little cart is filling up again with parts that are ready to go! Oh and yes we do like Hot Salsa!
Attached Images
  
__________________
Brett
67 Camaro SS: 67 Camaro Build
72 Cheyenne/C10 Super 115" Fleetside: 72 C10 Build
72 Cheyenne/K30 Super 133" Longhorn DRW: 72 K30 Build SOLD

YouTube: https://www.youtube.com/@6dee7-7dee2
7dee2 is offline   Reply With Quote
Old 01-27-2016, 08:56 PM   #518
Dieselwrencher
6>8 Plugless........
 
Dieselwrencher's Avatar
 
Join Date: Sep 2007
Location: Prairie City, Ia
Posts: 17,142
Re: 72 K30 Build

Did you source new dust shields, or did yours clean up that nice?
__________________
Ryan
1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread
1972 GMC Sierra Grande Longhorn 4x4
1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed
1972 C10 Suburban Custom Deluxe
1969 Chevy milk truck
1971 Camaro RS 5.3 BTR STG3 Cam Super T10
1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project


Tired of spark plugs? Check this out.
Dieselwrencher is offline   Reply With Quote
Old 01-28-2016, 11:27 AM   #519
7dee2
Registered User
 
7dee2's Avatar
 
Join Date: May 2011
Location: Syracuse, Utah
Posts: 1,986
Re: 72 K30 Build

They did clean up pretty good. One had a small rock dent so straightened, quick wire wheel then a little 80 grit scuff, some aluminum paint not perfect but they'll work.

In our preparation for the long block to return the decision was made that it’s time for a new engine stand. I’ve gotten tired of fighting my 30+yr old one that likes to try and tip over and can barely handle a complete big block. So this 1500lb capacity Big Red (that's black? w/fancy chrome ew ah ) needed the front leg narrowed just a little bit to fit our cherry picker on the one ton setting.
Attached Images
   
__________________
Brett
67 Camaro SS: 67 Camaro Build
72 Cheyenne/C10 Super 115" Fleetside: 72 C10 Build
72 Cheyenne/K30 Super 133" Longhorn DRW: 72 K30 Build SOLD

YouTube: https://www.youtube.com/@6dee7-7dee2
7dee2 is offline   Reply With Quote
Old 01-28-2016, 05:31 PM   #520
Dieselwrencher
6>8 Plugless........
 
Dieselwrencher's Avatar
 
Join Date: Sep 2007
Location: Prairie City, Ia
Posts: 17,142
Re: 72 K30 Build

That's one thing that I don't like about my current one. I can't get the cherry picker around it to get a 1200lb engine off. Sketchy.
__________________
Ryan
1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread
1972 GMC Sierra Grande Longhorn 4x4
1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed
1972 C10 Suburban Custom Deluxe
1969 Chevy milk truck
1971 Camaro RS 5.3 BTR STG3 Cam Super T10
1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project


Tired of spark plugs? Check this out.
Dieselwrencher is offline   Reply With Quote
Old 02-01-2016, 11:03 AM   #521
7dee2
Registered User
 
7dee2's Avatar
 
Join Date: May 2011
Location: Syracuse, Utah
Posts: 1,986
Re: 72 K30 Build

I know we couldn’t find a new cheapo stand that had any capacity that would nest with our picker until I ran across this one. Looks to be way better than the 1000lb HF with just a minor mod and for under $100 ordered online!

So this showed up last week and is a big motorvator to get the chassis back to being a roller! We’ll leave it bagged until we are at that point.
Attached Images
  
__________________
Brett
67 Camaro SS: 67 Camaro Build
72 Cheyenne/C10 Super 115" Fleetside: 72 C10 Build
72 Cheyenne/K30 Super 133" Longhorn DRW: 72 K30 Build SOLD

YouTube: https://www.youtube.com/@6dee7-7dee2
7dee2 is offline   Reply With Quote
Old 02-02-2016, 11:52 AM   #522
7dee2
Registered User
 
7dee2's Avatar
 
Join Date: May 2011
Location: Syracuse, Utah
Posts: 1,986
Re: 72 K30 Build

Installed both rear 3+3 brake line brackets, upper bracket lined up to one of the existing bump stop holes we had made just needed to drill another in both the bump stop bracket and then later the frame. Lower needed a trim as we will not be running the rear prop valve and both needed a minor tweak to fit the lines. Not much length to spare on the new soft line but that lower bracket can still be raised some if needed.
Attached Images
     
__________________
Brett
67 Camaro SS: 67 Camaro Build
72 Cheyenne/C10 Super 115" Fleetside: 72 C10 Build
72 Cheyenne/K30 Super 133" Longhorn DRW: 72 K30 Build SOLD

YouTube: https://www.youtube.com/@6dee7-7dee2
7dee2 is offline   Reply With Quote
Old 02-02-2016, 10:36 PM   #523
JJorgensen52
Simple? What's simple?
 
JJorgensen52's Avatar
 
Join Date: Apr 2007
Location: Southeast CT
Posts: 1,472
Re: 72 K30 Build

Quote:
Originally Posted by 7dee2 View Post
Installed both rear 3+3 brake line brackets, upper bracket lined up to one of the existing bump stop holes we had made just needed to drill another in both the bump stop bracket and then later the frame. Lower needed a trim as we will not be running the rear prop valve and both needed a minor tweak to fit the lines. Not much length to spare on the new soft line but that lower bracket can still be raised some if needed.
Is that the right soft line? That looks REALLY short, I'd be concerned about it coming up tight if you drive the truck empty...
__________________
CURRENT
'50 GMC 100 shortbed Gen IV 4.8 LS - 4L65E (Secret truck, Shhh!!!) Build
'63 Buick Wildcat Coupe 401ci Nailhead (Very much in pieces) Photos
'66 Impala SS convertible 327-QJet-glide (4 speed swap one of these days...) Photos
'69 CST/10 4x4 SWB Stepper 350 2bbl - NV4500/NP241C (Broken Truck!)
'72 Sierra Grande 2WD LWB fleetside 350-TH350 Refresh
'99 K2500 Silverado RCLB 5.7 Vortec - NV4500/NP241C (Daily)
'99 K2500 Suburban 7.4 Vortec - NV4500/NP246 (still working out the bugs)
SOLD
'71 Custom/10 2WD LWB fleetside - '72 GMC K/3500 Dually (Sold to redryder)
JJorgensen52 is offline   Reply With Quote
Old 02-03-2016, 10:28 AM   #524
7dee2
Registered User
 
7dee2's Avatar
 
Join Date: May 2011
Location: Syracuse, Utah
Posts: 1,986
Re: 72 K30 Build

Yeah it is the correct one for our donor truck as it seemed a little short to me also. RockAuto has 4 vendors for this part, 2 of them give the length and ours is the longest one by a whole ¼”!

Here are some pics of our reformed axle line ends they came pre-bent for the wider 14b. While doing this I found the easiest way to deal with the narrower cab & chassis 14b is to just lift the spring pack up out of the way. Pretty sure we’ll do the same when it’s time to bleed the system there is just very little to no room between the backing plate and spring pack. Just hope our short soft line will accommodate this maneuver when the time comes.
Attached Images
     
__________________
Brett
67 Camaro SS: 67 Camaro Build
72 Cheyenne/C10 Super 115" Fleetside: 72 C10 Build
72 Cheyenne/K30 Super 133" Longhorn DRW: 72 K30 Build SOLD

YouTube: https://www.youtube.com/@6dee7-7dee2
7dee2 is offline   Reply With Quote
Old 02-04-2016, 01:10 PM   #525
7dee2
Registered User
 
7dee2's Avatar
 
Join Date: May 2011
Location: Syracuse, Utah
Posts: 1,986
Re: 72 K30 Build

Here’s how this has turned out so far. May still need a new longer soft line but this is without a bed and the axle resting on stands.
Attached Images
   
__________________
Brett
67 Camaro SS: 67 Camaro Build
72 Cheyenne/C10 Super 115" Fleetside: 72 C10 Build
72 Cheyenne/K30 Super 133" Longhorn DRW: 72 K30 Build SOLD

YouTube: https://www.youtube.com/@6dee7-7dee2
7dee2 is offline   Reply With Quote
Reply

Bookmarks

Tags
72chevy, dually, flatbed, k30, motorhome


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 03:56 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com