CO 69-72 Steering Wheels--Never Installed - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**402Bowtie** · 01-14-2016, 02:36 AM

It's not fair to call these NOS due to their condition, but I believe these have never been installed. They weren't stored properly and they don't have the nice shine of an NOS wheel as well as some other issues. Since the grain is very good on both wheels, I had planned to make some repairs and repaint them...but have decided to go in different direction.

Both wheels have had some of the plastic removed on the backside of wheel (not sure why previous owner would do this----argh!). See my sample picture below for an explanation.

Wheel #1 -- GM# 9749753. Grain in overall very good shape with one 0.5" scrape near 12:00. Also has one crack 1.5" crack at 3:00. Has some other small scrapes along bottom of wheel. See pictures. $225 + shipping and fees. Money order or paypal acceptable. Now asking $110 plus shipping and fees.

Wheel #2 -- GM# 335212. Three hairline cracks on backside of right spoke. Also has more scrapes and gouges than the other wheel. Grain in pretty good shape except around 10:00--two spots seem "smushed" and third spot has a good gouge (see pictures). The grain pattern is a little different on this wheel...As I understand this is a less common, later production GM wheel according to this thread. $180 + shipping and fees. Paypal or money order accepted. Now asking $90 plus shipping and fees. SOLD

A good NOS wheel goes for at least $400-$500, so I am hoping I have these priced accordingly.

More pics to follow...

**402Bowtie** · 01-14-2016, 02:37 AM

Wheel #1 pics

**402Bowtie** · 01-14-2016, 02:38 AM

More wheel #1 pics

**402Bowtie** · 01-14-2016, 02:39 AM

Wheel #2 pics

**402Bowtie** · 01-14-2016, 02:40 AM

Last pics of wheel #2

**Blue/72** · 01-14-2016, 02:54 AM

Can I get some more pictures of the scraps and nicks on wheel 2? Thanks

**402Bowtie** · 01-14-2016, 03:23 AM

More pics of wheel 2. I did find some cracks starting on the back side of the right spoke. See the last picture.

**402Bowtie** · 01-14-2016, 03:23 AM

more pics wheel #2

**402Bowtie** · 01-14-2016, 03:25 AM

testing a bigger picture

edit: didn't make it any bigger...I'll have to look into posting bigger pictures.

**Blue/72** · 01-14-2016, 03:27 AM

Thank you bow tie but I will pass. Just as a heads up, you can wet sand these wheels down then hit them with a buffer and some compound and get most the smaller scratches out and bring back a ton of the shine to the wheel. I've use 500 then 800 and finish with 1000 then buff it and it comes out very nicely

**402Bowtie** · 01-14-2016, 03:29 AM

Quote:

Originally Posted by Blue/72

Thank you bow tie but I will pass. Just as a heads up, you can wet sand these wheels down then hit them with a buffer and some compound and get most the smaller scratches out and bring back a ton of the shine to the wheel. I've use 500 then 800 and finish with 1000 then buff it and it comes out very nicely

Good to know--thanks for sharing. I may still end up doing that if they don't sell.

**Blue/72** · 01-14-2016, 03:40 AM

Just so others can see (if they want to do this) what it will do

Before

**Blue/72** · 01-14-2016, 03:41 AM

And after.

Iron Hauler · 01-14-2016, 04:25 AM

Do they look NOS in the splined mounting area, can you show a close up there?
Posted via Mobile Device

**402Bowtie** · 01-14-2016, 08:04 PM

Close up pics of wheel #1 spline area

**402Bowtie** · 01-14-2016, 08:04 PM

Close up pics of wheel #2 spline area....both wheels could use good cleaning.

**402Bowtie** · 01-16-2016, 08:09 PM

Ttt

**402Bowtie** · 01-19-2016, 02:47 PM

ttt

**402Bowtie** · 01-21-2016, 12:50 PM

I'm open to offers on these. ...

**402Bowtie** · 01-28-2016, 09:19 PM

Ttt

Joesprocket · 01-29-2016, 09:07 PM

I didnt see you mention this but wanted to verify. Are you selling with any hardware to install and center caps? Thanks!

**402Bowtie** · 01-29-2016, 09:13 PM

Wheel 2 has some horn hardware as pictured. I don't have any other related items to include. ..just what is shown in pics.

**402Bowtie** · 02-04-2016, 12:55 AM

listening to offers...

**402Bowtie** · 02-08-2016, 02:43 PM

I cut my asking prices in half....

**402Bowtie** · 02-12-2016, 11:53 PM

Ttt

01-14-2016, 02:38 AM	#3
402Bowtie Registered User Join Date: Sep 2003 Location: Denver, CO Posts: 3,726	Re: 69-72 Steering Wheels--Never Installed More wheel #1 pics Attached Images

01-14-2016, 02:39 AM	#4
402Bowtie Registered User Join Date: Sep 2003 Location: Denver, CO Posts: 3,726	Re: 69-72 Steering Wheels--Never Installed Wheel #2 pics Attached Images

01-14-2016, 02:40 AM	#5
402Bowtie Registered User Join Date: Sep 2003 Location: Denver, CO Posts: 3,726	Re: 69-72 Steering Wheels--Never Installed Last pics of wheel #2 Attached Images

01-14-2016, 02:54 AM	#6
Blue/72 Senior Member Join Date: Aug 2014 Location: Sandy, Oregon Posts: 2,376	Re: 69-72 Steering Wheels--Never Installed Can I get some more pictures of the scraps and nicks on wheel 2? Thanks __________________ My dad always says that HEI distributers are pointless... •1972 Custom/10 Deluxe. My first truck and I've had it since I was 7. Tilt, tach, AM/FM, 350, deep dish rally's, original paint and an increasing amount of NOS jewelry. It's always taking my money.. •1967 c10 with tach, dropped 3/5 on deep dish rally's •1972 Cheyenne Super. Sold

01-14-2016, 03:23 AM	#7
402Bowtie Registered User Join Date: Sep 2003 Location: Denver, CO Posts: 3,726	Re: 69-72 Steering Wheels--Never Installed More pics of wheel 2. I did find some cracks starting on the back side of the right spoke. See the last picture. Attached Images

01-14-2016, 02:36 AM	#1
402Bowtie Registered User Join Date: Sep 2003 Location: Denver, CO Posts: 3,726	69-72 Steering Wheels--Never Installed It's not fair to call these NOS due to their condition, but I believe these have never been installed. They weren't stored properly and they don't have the nice shine of an NOS wheel as well as some other issues. Since the grain is very good on both wheels, I had planned to make some repairs and repaint them...but have decided to go in different direction. Both wheels have had some of the plastic removed on the backside of wheel (not sure why previous owner would do this----argh!). See my sample picture below for an explanation. Wheel #1 -- GM# 9749753. Grain in overall very good shape with one 0.5" scrape near 12:00. Also has one crack 1.5" crack at 3:00. Has some other small scrapes along bottom of wheel. See pictures. $225 + shipping and fees. Money order or paypal acceptable. Now asking $110 plus shipping and fees. Wheel #2 -- GM# 335212. Three hairline cracks on backside of right spoke. Also has more scrapes and gouges than the other wheel. Grain in pretty good shape except around 10:00--two spots seem "smushed" and third spot has a good gouge (see pictures). The grain pattern is a little different on this wheel...As I understand this is a less common, later production GM wheel according to this thread. $180 + shipping and fees. Paypal or money order accepted. Now asking $90 plus shipping and fees. SOLD A good NOS wheel goes for at least $400-$500, so I am hoping I have these priced accordingly. More pics to follow... Attached Images Last edited by 402Bowtie; 02-19-2016 at 06:14 PM.

01-14-2016, 02:37 AM	#2
402Bowtie Registered User Join Date: Sep 2003 Location: Denver, CO Posts: 3,726	Re: 69-72 Steering Wheels--Never Installed Wheel #1 pics Attached Images

01-14-2016, 03:25 AM	#9
402Bowtie Registered User Join Date: Sep 2003 Location: Denver, CO Posts: 3,726	Re: 69-72 Steering Wheels--Never Installed testing a bigger picture edit: didn't make it any bigger...I'll have to look into posting bigger pictures. Attached Images

01-14-2016, 03:27 AM	#10
Blue/72 Senior Member Join Date: Aug 2014 Location: Sandy, Oregon Posts: 2,376	Re: 69-72 Steering Wheels--Never Installed Thank you bow tie but I will pass. Just as a heads up, you can wet sand these wheels down then hit them with a buffer and some compound and get most the smaller scratches out and bring back a ton of the shine to the wheel. I've use 500 then 800 and finish with 1000 then buff it and it comes out very nicely __________________ My dad always says that HEI distributers are pointless... •1972 Custom/10 Deluxe. My first truck and I've had it since I was 7. Tilt, tach, AM/FM, 350, deep dish rally's, original paint and an increasing amount of NOS jewelry. It's always taking my money.. •1967 c10 with tach, dropped 3/5 on deep dish rally's •1972 Cheyenne Super. Sold

01-14-2016, 03:40 AM	#12
Blue/72 Senior Member Join Date: Aug 2014 Location: Sandy, Oregon Posts: 2,376	Re: 69-72 Steering Wheels--Never Installed Just so others can see (if they want to do this) what it will do Before Attached Images __________________ My dad always says that HEI distributers are pointless... •1972 Custom/10 Deluxe. My first truck and I've had it since I was 7. Tilt, tach, AM/FM, 350, deep dish rally's, original paint and an increasing amount of NOS jewelry. It's always taking my money.. •1967 c10 with tach, dropped 3/5 on deep dish rally's •1972 Cheyenne Super. Sold

01-14-2016, 03:41 AM	#13
Blue/72 Senior Member Join Date: Aug 2014 Location: Sandy, Oregon Posts: 2,376	Re: 69-72 Steering Wheels--Never Installed And after. Attached Images __________________ My dad always says that HEI distributers are pointless... •1972 Custom/10 Deluxe. My first truck and I've had it since I was 7. Tilt, tach, AM/FM, 350, deep dish rally's, original paint and an increasing amount of NOS jewelry. It's always taking my money.. •1967 c10 with tach, dropped 3/5 on deep dish rally's •1972 Cheyenne Super. Sold

01-14-2016, 04:25 AM	#14
Iron Hauler Registered User Join Date: Mar 2011 Location: Shenandoah Iowa Posts: 186	Do they look NOS in the splined mounting area, can you show a close up there? Posted via Mobile Device

01-14-2016, 08:04 PM	#15
402Bowtie Registered User Join Date: Sep 2003 Location: Denver, CO Posts: 3,726	Re: 69-72 Steering Wheels--Never Installed Close up pics of wheel #1 spline area Attached Images

01-16-2016, 08:09 PM	#17
402Bowtie Registered User Join Date: Sep 2003 Location: Denver, CO Posts: 3,726	Re: 69-72 Steering Wheels--Never Installed Ttt

01-19-2016, 02:47 PM	#18
402Bowtie Registered User Join Date: Sep 2003 Location: Denver, CO Posts: 3,726	Re: 69-72 Steering Wheels--Never Installed ttt



Register or Log In To remove these advertisements.

01-21-2016, 12:50 PM	#19
402Bowtie Registered User Join Date: Sep 2003 Location: Denver, CO Posts: 3,726	Re: 69-72 Steering Wheels--Never Installed I'm open to offers on these. ...

01-28-2016, 09:19 PM	#20
402Bowtie Registered User Join Date: Sep 2003 Location: Denver, CO Posts: 3,726	Re: 69-72 Steering Wheels--Never Installed Ttt

01-29-2016, 09:07 PM	#21
Joesprocket Registered User Join Date: Sep 2014 Location: Richmond, VA Posts: 29	Re: 69-72 Steering Wheels--Never Installed I didnt see you mention this but wanted to verify. Are you selling with any hardware to install and center caps? Thanks!

01-29-2016, 09:13 PM	#22
402Bowtie Registered User Join Date: Sep 2003 Location: Denver, CO Posts: 3,726	Re: 69-72 Steering Wheels--Never Installed Wheel 2 has some horn hardware as pictured. I don't have any other related items to include. ..just what is shown in pics.

02-04-2016, 12:55 AM	#23
402Bowtie Registered User Join Date: Sep 2003 Location: Denver, CO Posts: 3,726	Re: 69-72 Steering Wheels--Never Installed listening to offers...

02-08-2016, 02:43 PM	#24
402Bowtie Registered User Join Date: Sep 2003 Location: Denver, CO Posts: 3,726	Re: 69-72 Steering Wheels--Never Installed I cut my asking prices in half....

02-12-2016, 11:53 PM	#25
402Bowtie Registered User Join Date: Sep 2003 Location: Denver, CO Posts: 3,726	Re: 69-72 Steering Wheels--Never Installed Ttt

Register or Log In To remove these advertisements.