Pro Performance - Now a Dirty Dingo Dealer!!

[Pro Performance]

We are now offering the complete Dirty Dingo line up! We are excited to be offering these quality USA made parts for all the LS conversions. They have motor mount adapters, PCM mounting brackets, engine lift plates, accessory drive brackets, etc. We are slowly getting all the items uploaded to our site, and have done some already. If you don't see what you need, let us know and be glad to help you out.

Some of the products they offer.

Need conversion mounts? These slider mounts allow you to position the engine in the same location as your SBC, or move it forward if needed in virtually any spot with 2" of adjustability.

63-72 C10:
http://www.azproperformance.com/Dirt...63-72-C10.html

73-87 C10:
http://www.azproperformance.com/Dirt...-DD-2500C.html



Wanting to add a high performance or car intake onto a 5.3 truck engine? These spacers will allow you to run the Camaro/Corvette water pump, to allow clearance for the throttle body on lower intakes. These also have a provision for the steam port!

Water Pump Spacers:
http://www.azproperformance.com/Dirt...LS-WP-SP1.html



Looking for a good way to mount that PCM that has no mounting tabs?

PCM Mounting Bracket:
http://www.azproperformance.com/Dirt...-LS-PCM-1.html

[Pro Performance]

Another great item they offer is the Sanden compressor bracket. This comes with the Gates idler pulley (doesn't have to be purchased separately like other mounts), and correctly lines up the belt to eliminate belt noise.

https://www.azproperformance.com/Dir...DEN-AC-TR.html

[Pro Performance]

We also just posted a ton of LS swap information to our site. We now have oil pan dimensions listed, balancer dimensions, engine designations, etc. (Info pulled from Dirty Dingo)

General LS Swap Info

LS Oil Pan Dimensions

[Pro Performance]

Ttt