Does anyone have borla or magnaflow exhaust - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**blazercrazy70** · 01-24-2016, 05:56 PM

Looking for sound bytes from some our members trucks. Trying to decide which I want to use leaning towards borla but would like to hear both on real trucks not the ones from the manufacturer

Andy4639 · 01-24-2016, 07:25 PM

Magnaflows on mine. 2.5" all the way from long tube headers. Couldn't ask for a better sound.

You Tube

BossHogg69 · 01-24-2016, 08:02 PM

Borla XR1's. Your results may vary. I don't care for magnaflows at all, jmho.

https://www.youtube.com/watch?v=hIiMGL-8Tp8

Jonlopes · 01-24-2016, 08:13 PM

Quote:

Originally Posted by Andy4639

Magnaflows on mine. 2.5" all the way from long tube headers. Couldn't ask for a better sound.

www.youtube.com/watch?v=pWPAPNzYQL0

That sounds really good, is the video of your LS powered truck? If so do you know of any good clips of a big block powered truck?

Also which magnaflow part numbers do you recommend?

**jerry moss** · 01-25-2016, 12:13 AM

if you decide on borla be sure to save your warranty papers--you will need them. they are over priced crap in my opinion. before anyone throws a fit about what i just typed, let me give a little history about myself-i've been in the same muffler shop for 31 years and have seen quite a lot in that time. borla uses thin material on the shell and the necks of their mufflers, i can dent the shell with my thumb!!!!! i have replaced a lot of them over the years with magnaflows. i will not sell them. if a customer has their heart set on borla, i tell them to buy them and i'll put them on but save that warranty paper.
i have magnaflows on my 72 that i installed back in 1989 that are still fine. i have flowmasters on my 77 blazer and flo-pros on my 73-80 4x4. i've had spintecs-way too loud in my opinion but quality built mufflers.

70LonghornCST · 01-25-2016, 12:48 AM

The Magnaflows on my 2006 Silverado sound awesome. I will be putting them on my build when I ever get to it.

Andy4639 · 01-25-2016, 06:53 AM

Quote:

Originally Posted by Jonlopes

That sounds really good, is the video of your LS powered truck? If so do you know of any good clips of a big block powered truck?

Also which magnaflow part numbers do you recommend?

Yes this is the 6.0 LS motor. I can get the numbers but I don't know them right off. If you have a BB you may want to go to 3" pipe.
I would try typing bb in you tube.

**ho70** · 01-25-2016, 08:11 AM

No bytes to hear, but have flowmasters on my 70 Challenger and they are loud. Magnaflows on my 72 c10 and they are sweet on the 402

**D.PASSMORE** · 01-25-2016, 12:29 PM

I've ran SS Borla's on my Blazer for the last five years and one is rattling inside. Like Jerry said, they are thin! I had some road debris hit the Passenger side muffler and it split wide open, had to replace it - $$. Love the sound with SS tips (not Tubes). Going run Magna flow next go round - soon!

david borla · 01-25-2016, 06:26 PM

Quote:

Originally Posted by D.PASSMORE

I've ran SS Borla's on my Blazer for the last five years and one is rattling inside. Like Jerry said, they are thin! I had some road debris hit the Passenger side muffler and it split wide open, had to replace it - $$. Love the sound with SS tips (not Tubes). Going run Magna flow next go round - soon!

This is David Borla from Borla Exhaust. My apologies for the failure. Please use our million mile warranty and let us take care of this issue. We can only stand behind our products as promised if you let us know. You can call me directly at 805.246.6067 or send an email to davidb@borla.com and I'll have our customer service team resolve the issue to your satisfaction.

**D.PASSMORE** · 01-25-2016, 07:01 PM

Quote:

Originally Posted by david borla

This is David Borla from Borla Exhaust. My apologies for the failure. Please use our million mile warranty and let us take care of this issue. We can only stand behind our products as promised if you let us know. You can call me directly at 805.246.6067 or send an email to davidb@borla.com and I'll have our customer service team resolve the issue to your satisfaction.

Well, first welcome to the 67-72 Chevy truck board. I'm glad you took you the time to review this thread and present yourself. Its always exhilarating feeling with some one in your position replies to a board question and gives reassures that you are backing your products. I will certainly give a call tomorrow and tell my story, hopefully we can come to a consensus. I have no problem running Borla mufflers with a good warranty. Thanks again, D/

Hopefully I didn't hijack your thread, my apologies if I did...

jjlett69 · 01-25-2016, 07:12 PM

Quote:

Originally Posted by david borla

This is David Borla from Borla Exhaust. My apologies for the failure. Please use our million mile warranty and let us take care of this issue. We can only stand behind our products as promised if you let us know. You can call me directly at 805.246.6067 or send an email to davidb@borla.com and I'll have our customer service team resolve the issue to your satisfaction.

Awesome! Now that is standing behind your product!!

Wasted Income · 01-25-2016, 07:19 PM

This is the LS powered monte I built for my brother. Longtubes, magnaflows, and 3" stainless the whole way.

Monte Carlo with an LSX swap - YouTube

david borla · 01-25-2016, 08:25 PM

Quote:

Originally Posted by D.PASSMORE

Well, first welcome to the 67-72 Chevy truck board. I'm glad you took you the time to review this thread and present yourself. Its always exhilarating feeling with some one in your position replies to a board question and gives reassures that you are backing your products. I will certainly give a call tomorrow and tell my story, hopefully we can come to a consensus. I have no problem running Borla mufflers with a good warranty. Thanks again, D/

Hopefully I didn't hijack your thread, my apologies if I did...

Thanks for the kind words and I look forward to speaking with you. We wouldn't have achieved the position we have among enthusiasts without taking good care of our customers and I appreciate you giving us the opportunity to do so in this case.

It really doesn't matter how long we've been doing this, or how well-known our brand is, because if we slack on the enthusiasts that use our products we'll be gone in a heartbeat, and rightly so.

We have to meet the challenge every single day and we know it.

**jerry moss** · 01-25-2016, 11:23 PM

since i bashed his product so bad, i sent David a P.M. with my shop number. hopefully he will call and we can discuss future plans at Borla as far as the material goes. they sound great but the thin material makes me shy away from them.

**Already Gone** · 01-25-2016, 11:45 PM

Great enlightening thread.

**blazercrazy70** · 01-26-2016, 12:56 PM

This is great seeing a company stand by their product. I am still leaning towards them they have great sound

original-71 · 01-26-2016, 03:22 PM

Quote:

Originally Posted by blazercrazy70

This is great seeing a company stand by their product. I am still leaning towards them they have great sound

I have borla on my 87 stock 350 sounds great I would love to have them on my 71 but my flows are still pretty much new only reason I haven't changed them yet.

**blazercrazy70** · 01-27-2016, 01:14 PM

Any other sound bytes

**D.PASSMORE** · 02-10-2016, 11:16 AM

Quote:

Originally Posted by david borla

Thanks for the kind words and I look forward to speaking with you. We wouldn't have achieved the position we have among enthusiasts without taking good care of our customers and I appreciate you giving us the opportunity to do so in this case.

It really doesn't matter how long we've been doing this, or how well-known our brand is, because if we slack on the enthusiasts that use our products we'll be gone in a heartbeat, and rightly so.

We have to meet the challenge every single day and we know it.

Doing a follow up, just getting back home from a trip and as David expressed in his comments, Borla replaced both of my mufflers at no charge. With this warranty and customer service, plus a nice sounding product, I highly recommend these guys. Thanks again David!

68Stepbed · 02-10-2016, 11:53 AM

Magnaflow

https://www.youtube.com/watch?v=WqrdIgxwq2Q

https://www.youtube.com/watch?v=Yd2n9lFBTqA

david borla · 02-10-2016, 08:03 PM

Quote:

Originally Posted by D.PASSMORE

Doing a follow up, just getting back home from a trip and as David expressed in his comments, Borla replaced both of my mufflers at no charge. With this warranty and customer service, plus a nice sounding product, I highly recommend these guys. Thanks again David!

Glad we were able to turn this around for the better. Cheers!

**blazercrazy70** · 03-12-2016, 05:51 PM

Getting ready to pull the trigger on the borla's got my ls in about ready to fire so time to get the exhaust on. Anybody know the best place to get a deal on them. Will post a sound clip once they are on. If anybody had a clip please put it up.

Z10 · 03-13-2016, 01:26 PM

Another vote for Magnaflow. You can see pics on my build thread below. I'm also using Magnaflow cats.

Coach · 03-13-2016, 02:21 PM

Magnaflows for me - 2.5" with an X-pipe. Great sound at idle and a nice rumble when you get on it a bit. On a side note: the muffler shop Jerry works at did the install. Great price and great workmanship!!!

01-24-2016, 05:56 PM	#1
blazercrazy70 Senior Member Join Date: Sep 2006 Location: illinois Posts: 516	Does anyone have borla or magnaflow exhaust Looking for sound bytes from some our members trucks. Trying to decide which I want to use leaning towards borla but would like to hear both on real trucks not the ones from the manufacturer

01-24-2016, 08:02 PM	#3
BossHogg69 motor exploder Join Date: Mar 2009 Location: Pittsburgh, PA Posts: 2,346	Re: Does anyone have borla or magnaflow exhaust Borla XR1's. Your results may vary. I don't care for magnaflows at all, jmho. https://www.youtube.com/watch?v=hIiMGL-8Tp8 __________________ Adam 1969 Chevy CST/10 stepside, DART Big M/TREMEC Magnum Extreme/3.73's w/Detroit Truetrac 1965 Chevy Bel Air Wagon (daily driver), 327/TH350,10 bolt w/3.08's 1961 Chevy Bel Air Sport Coupe, ZZ454/M21/9" rear w/3.50's & Detroit Truetrac 2005 GMC 1500 ccsb 2wd, 6.0L/4L65e/3.73 G80 2006 GMC 2500HD ccsb 4x4, DMax LBZ/Allison 6spd/4.56's w/Detroit TrueTrac Use the SEARCH function on this forum - it is your friend!!

01-25-2016, 12:13 AM	#5
jerry moss Born Psycho Join Date: Feb 2001 Location: brentwood,cal,usa Posts: 4,915	Re: Does anyone have borla or magnaflow exhaust if you decide on borla be sure to save your warranty papers--you will need them. they are over priced crap in my opinion. before anyone throws a fit about what i just typed, let me give a little history about myself-i've been in the same muffler shop for 31 years and have seen quite a lot in that time. borla uses thin material on the shell and the necks of their mufflers, i can dent the shell with my thumb!!!!! i have replaced a lot of them over the years with magnaflows. i will not sell them. if a customer has their heart set on borla, i tell them to buy them and i'll put them on but save that warranty paper. i have magnaflows on my 72 that i installed back in 1989 that are still fine. i have flowmasters on my 77 blazer and flo-pros on my 73-80 4x4. i've had spintecs-way too loud in my opinion but quality built mufflers. __________________ jerry moss 72 cheyenne super K20- tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,tow hooks,bumper guards,toolbox,aux. fuel tank,posi front and rear,plus other goodies!!! SOLD 69 suburban K20-tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,4 inch all spring lift,4 speed, 14 bolt full floater, dana 44 HD,warn winch,posi front and rear,tow hooks,plus other goodies. 73/80 chevy/gmc K20 SB400,turbo 400,205,tilt,a-c,gas hog. 77 K/5 cheyenne blazer-daily driver/beater. SON HAS IT NOW BRENTWOOD,CALIFORNIA

01-25-2016, 12:48 AM	#6
70LonghornCST Moderator Join Date: Jun 2008 Location: Modesto, CA Posts: 5,775	Re: Does anyone have borla or magnaflow exhaust The Magnaflows on my 2006 Silverado sound awesome. I will be putting them on my build when I ever get to it. __________________ 2018 Chevy Crew Cab 2006 Impala SS 1965 Plymouth Sport Fury 1970 Chevy Longhorn Bucket Seats Shoulder Belts Front Tow Hooks Factory Air Factory Speedwarning, Tach & Vaccum Factory Tilt CST Package AM/FM Radio Bumper Guards Richard 70 Longhorn CST Build Adding an AM/FM Decal

01-25-2016, 08:11 AM	#8
ho70 Registered User Join Date: Nov 2013 Location: Winnipeg, Mb Posts: 1,115	Re: Does anyone have borla or magnaflow exhaust No bytes to hear, but have flowmasters on my 70 Challenger and they are loud. Magnaflows on my 72 c10 and they are sweet on the 402

01-25-2016, 12:29 PM	#9
D.PASSMORE One of the First Join Date: Jan 2000 Location: St. Augustine,FL. Posts: 4,054	Re: Does anyone have borla or magnaflow exhaust I've ran SS Borla's on my Blazer for the last five years and one is rattling inside. Like Jerry said, they are thin! I had some road debris hit the Passenger side muffler and it split wide open, had to replace it - $$. Love the sound with SS tips (not Tubes). Going run Magna flow next go round - soon! __________________ DAVID PASSMORE ST AUGUSTINE ,FL ZIP 32084 '71 SWB K/10 CUSTOM DELUXE (Chili) '72 BLAZER K/5 Muscle Truck (Mule) '72 LWB K/20 CHEYENNE (Blackie)

01-25-2016, 11:23 PM	#15
jerry moss Born Psycho Join Date: Feb 2001 Location: brentwood,cal,usa Posts: 4,915	Re: Does anyone have borla or magnaflow exhaust since i bashed his product so bad, i sent David a P.M. with my shop number. hopefully he will call and we can discuss future plans at Borla as far as the material goes. they sound great but the thin material makes me shy away from them. __________________ jerry moss 72 cheyenne super K20- tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,tow hooks,bumper guards,toolbox,aux. fuel tank,posi front and rear,plus other goodies!!! SOLD 69 suburban K20-tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,4 inch all spring lift,4 speed, 14 bolt full floater, dana 44 HD,warn winch,posi front and rear,tow hooks,plus other goodies. 73/80 chevy/gmc K20 SB400,turbo 400,205,tilt,a-c,gas hog. 77 K/5 cheyenne blazer-daily driver/beater. SON HAS IT NOW BRENTWOOD,CALIFORNIA

01-25-2016, 11:45 PM	#16
Already Gone 70+ ( Old Skool Club ) Join Date: Nov 2003 Location: Saskatoon, Saskatchewan ,Canada Posts: 9,139	Re: Does anyone have borla or magnaflow exhaust Great enlightening thread. __________________ 1972 C10 Custom/Deluxe 613 Highlander 406/700R4 1999 White Tahoe LS 4x2 with Z56 Police Package 1992 K1500 GMC Suburban Members I have personally met: MusicMan70 - HeavyD - ChewyChevy67 - StingRay -71SWB4x4 - 67 Burb - DeadheadNM - too much stuff - bc65 - das601 " Circumsatances Do Not Change Responsibility " " The Sky is not the Limit, Your Mind is." Marilyn Monroe .. RIP Charlie Watts 1941 - 2021

01-26-2016, 12:56 PM	#17
blazercrazy70 Senior Member Join Date: Sep 2006 Location: illinois Posts: 516	Re: Does anyone have borla or magnaflow exhaust This is great seeing a company stand by their product. I am still leaning towards them they have great sound

01-27-2016, 01:14 PM	#19
blazercrazy70 Senior Member Join Date: Sep 2006 Location: illinois Posts: 516	Re: Does anyone have borla or magnaflow exhaust Any other sound bytes

02-10-2016, 11:53 AM	#21
68Stepbed Registered User Join Date: Mar 2005 Location: 10-Uh-See Posts: 5,609	Re: Does anyone have borla or magnaflow exhaust Magnaflow https://www.youtube.com/watch?v=WqrdIgxwq2Q https://www.youtube.com/watch?v=Yd2n9lFBTqA __________________ Matt 68 C10 stepside, LS1/700R4, TCI Engineering suspension system

03-12-2016, 05:51 PM	#23
blazercrazy70 Senior Member Join Date: Sep 2006 Location: illinois Posts: 516	Re: Does anyone have borla or magnaflow exhaust Getting ready to pull the trigger on the borla's got my ls in about ready to fire so time to get the exhaust on. Anybody know the best place to get a deal on them. Will post a sound clip once they are on. If anybody had a clip please put it up.

03-13-2016, 01:26 PM	#24
Z10 Registered User Join Date: Aug 2012 Location: Midland, TX Posts: 1,267	Re: Does anyone have borla or magnaflow exhaust Another vote for Magnaflow. You can see pics on my build thread below. I'm also using Magnaflow cats. __________________ 1969 RS/SS Z10 Camaro Pace coupe 1972 GMC Short Step buildhttp://67-72chevytrucks.com/vboard/s...=1#post6356218 1979 Mazda RX7 1979 Pontiac Trans Am WS6 & 1979 Pontiac Trans Am 10th Anniversary 1999 Honda Valkyrie 2006 Corvette Z06 2010 BMW 650i

03-13-2016, 02:21 PM	#25
Coach Registered User Join Date: Oct 2014 Location: brentwood, ca. Posts: 109	Re: Does anyone have borla or magnaflow exhaust Magnaflows for me - 2.5" with an X-pipe. Great sound at idle and a nice rumble when you get on it a bit. On a side note: the muffler shop Jerry works at did the install. Great price and great workmanship!!! __________________ 1967 Chevy C10 Stepside SWB - 350/700r4



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.