Turn signal connector - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**ga-stepside** · 02-23-2016, 09:42 PM

I have a 1967 C10. I am rewiring the engine bay to fix a lot of shaky wiring the PO did. One of the things that is missing is one of the rubber turn signal connectors. driver side, that goes through the front support. Both the connector from the turn signal light and the one from the wiring harness are gone. Believe it or not the PO used wire nuts to connect the wires! Anyone know where I could get these?

Dale

74baggedbug · 02-23-2016, 10:39 PM

American auto wire or if you can post a pic and I'll look on my old harness and see if I have it

**ga-stepside** · 02-24-2016, 09:46 AM

Quote:

Originally Posted by 74baggedbug

American auto wire or if you can post a pic and I'll look on my old harness and see if I have it

Crappy picts but this is what I need. I need a few inches of wiring with each connector.
light side connector

harness side connector

74baggedbug · 02-24-2016, 04:07 PM

I think I have the harness side connectors and possibly the light side also I'll let you know later tonight

**ga-stepside** · 02-24-2016, 04:49 PM

Quote:

Originally Posted by 74baggedbug

I think I have the harness side connectors and possibly the light side also I'll let you know later tonight

Cool, I need both to make this work.
Do you have any idea what this connector is for? It on the driver side behind the headlight.

TheSeeker · 02-24-2016, 05:11 PM

That looks like the plug to the voltage regulator, and the wires have been jumped for an internally regulated model of alternator.

**ga-stepside** · 02-24-2016, 05:20 PM

Quote:

Originally Posted by TheSeeker

That looks like the plug to the voltage regulator, and the wires have been jumped for an internally regulated model of alternator.

Thanks that is what I was thinking.

Aztec.A · 02-25-2016, 01:55 PM

I need on of those connectors too! (like ga-stepside needs)

My problem with my harness is it has a small amount of voltage on the ground.

I disconnected the grounds and touched them to the frame and voila the lights come on. I'm missing the rubber plug that connects to the drivers side turn indicator.

Any tips where I can find will help!

Thanks

**ga-stepside** · 02-25-2016, 02:53 PM

Quote:

Originally Posted by Aztec.A

I need on of those connectors too! (like ga-stepside needs)

My problem with my harness is it has a small amount of voltage on the ground.

I disconnected the grounds and touched them to the frame and voila the lights come on. I'm missing the rubber plug that connects to the drivers side turn indicator.

Any tips where I can find will help!

Thanks

You might try getting some electrical contact cleaner and spray it inside both connectors. You probably have corrosion inside that is causing a mild short to the ground pin. Home Depot should have the cleaner.

**michael bustamante** · 02-25-2016, 05:13 PM

im going to be bypassing my og turn signals from the 67 if you like i can sell you the plugs.

**ga-stepside** · 02-25-2016, 05:24 PM

Quote:

Originally Posted by michael bustamante

im going to be bypassing my og turn signals from the 67 if you like i can sell you the plugs.

PM sent

snipescastle2 · 02-25-2016, 11:24 PM

I have an extra front light harness I'm not using, it is missing one side of the turn signal plugs, but I have replacements for that.all the other plugs are there, and in working order. I believe,
This is from a '69 C 10, should work with your truck, let me know if you want it. Yours for the cost of postage.....
Ben

**ga-stepside** · 02-26-2016, 08:47 AM

Quote:

Originally Posted by snipescastle2

I have an extra front light harness I'm not using, it is missing one side of the turn signal plugs, but I have replacements for that.all the other plugs are there, and in working order. I believe,
This is from a '69 C 10, should work with your truck, let me know if you want it. Yours for the cost of postage.....
Ben

Thanks but the connectors don't look like my 67 harness.

snipescastle2 · 02-26-2016, 11:26 AM

Ok, I'll post some pictures of the connectors later today, them phone camera pics leave a lot to be desired....mostly clarity.....
Ben

**ga-stepside** · 02-26-2016, 12:06 PM

Quote:

Originally Posted by snipescastle2

Ok, I'll post some pictures of the connectors later today, them phone camera pics leave a lot to be desired....mostly clarity.....
Ben

PM sent. I will take the harness, thanks

Dale

snipescastle2 · 02-26-2016, 03:51 PM

Dale,
Send me your address and I'll get this boxed up, it's at my work, so it will mail out Monday.
Don't have paypal, so just send me a check or money order for the postage.....I'll let you know Monday, probably less than $14.00 ( priority flat rate box)
Ben

02-23-2016, 09:42 PM	#1
ga-stepside Senior Member Join Date: Jan 2016 Location: Sugar Hill GA Posts: 369	Turn signal connector I have a 1967 C10. I am rewiring the engine bay to fix a lot of shaky wiring the PO did. One of the things that is missing is one of the rubber turn signal connectors. driver side, that goes through the front support. Both the connector from the turn signal light and the one from the wiring harness are gone. Believe it or not the PO used wire nuts to connect the wires! Anyone know where I could get these? Dale

02-23-2016, 10:39 PM	#2
74baggedbug Registered User Join Date: Oct 2011 Location: Houston tx Posts: 701	Re: Turn signal connector American auto wire or if you can post a pic and I'll look on my old harness and see if I have it

02-24-2016, 04:07 PM	#4
74baggedbug Registered User Join Date: Oct 2011 Location: Houston tx Posts: 701	Re: Turn signal connector I think I have the harness side connectors and possibly the light side also I'll let you know later tonight

02-24-2016, 05:11 PM	#6
TheSeeker Registered User Join Date: Dec 2009 Location: Glendale, AZ Posts: 337	Re: Turn signal connector That looks like the plug to the voltage regulator, and the wires have been jumped for an internally regulated model of alternator.

02-25-2016, 01:55 PM	#8
Aztec.A Registered User Join Date: Nov 2015 Location: San Antonio, TX Posts: 63	Re: Turn signal connector I need on of those connectors too! (like ga-stepside needs) My problem with my harness is it has a small amount of voltage on the ground. I disconnected the grounds and touched them to the frame and voila the lights come on. I'm missing the rubber plug that connects to the drivers side turn indicator. Any tips where I can find will help! Thanks

02-25-2016, 05:13 PM	#10
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,858	Re: Turn signal connector im going to be bypassing my og turn signals from the 67 if you like i can sell you the plugs. __________________ 1967custom

02-25-2016, 11:24 PM	#12
snipescastle2 Registered User Join Date: Mar 2009 Location: WARRENSBURG,MISSOURI,64093 Posts: 1,518	Re: Turn signal connector I have an extra front light harness I'm not using, it is missing one side of the turn signal plugs, but I have replacements for that.all the other plugs are there, and in working order. I believe, This is from a '69 C 10, should work with your truck, let me know if you want it. Yours for the cost of postage..... Ben Attached Images Last edited by snipescastle2; 02-25-2016 at 11:29 PM. Reason: adding pictures

02-26-2016, 11:26 AM	#14
snipescastle2 Registered User Join Date: Mar 2009 Location: WARRENSBURG,MISSOURI,64093 Posts: 1,518	Re: Turn signal connector Ok, I'll post some pictures of the connectors later today, them phone camera pics leave a lot to be desired....mostly clarity..... Ben

02-26-2016, 03:51 PM	#16
snipescastle2 Registered User Join Date: Mar 2009 Location: WARRENSBURG,MISSOURI,64093 Posts: 1,518	Re: Turn signal connector Dale, Send me your address and I'll get this boxed up, it's at my work, so it will mail out Monday. Don't have paypal, so just send me a check or money order for the postage.....I'll let you know Monday, probably less than $14.00 ( priority flat rate box) Ben



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.