![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Registered User
Join Date: Mar 2016
Location: Uppsala
Posts: 32
|
New to the forum, Stepside bed questions
I am working on a -64 Stepside in Sweden and i dont have a assembly manual for my truck and I bought it in pieces so I have no idea how stuff where fitted togheter
![]() But maybe someone can help me??? Does any one know the dimensions of the cross sills?? What i have understod the 60-66 are diffrent from earlier years? http://www.mar-k.com/bed_side_interchange_gm.aspx Do i put the bedsides directly on the cross sills or should it be wood between the cross sill and bedside? Would be wonderful if someone has a reassembly picture/describition of that /C |
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Dec 2012
Location: Rochester, KENT
Posts: 10,543
|
Re: New to the forum, Stepside bed questions
Looking at your thread here : http://67-72chevytrucks.com/vboard/s...d.php?t=699736
I can see you started with a real basket case. I hope guys like Ta2Don can help you. Or maybe someone else has some photos in a build thread to share with you. Good luck with your build. I told my wife that you were either very brave or very stupid...... She replied there was little difference when it came to men and trucks.....
__________________
MY BUILD LINK: http://67-72chevytrucks.com/vboard/s...585901]Redneck Express - 1966 C10 Short Fleetside MY USA ROADTRIPS http://forum.retro-rides.org/thread/...2018-humdinger IF YOU CAN'T FIX IT WITH A HAMMER, YOU'VE GOT AN ELECTRICAL PROBLEM MATE. |
![]() |
![]() |
![]() |
#3 | |
Registered User
Join Date: Mar 2016
Location: Uppsala
Posts: 32
|
Re: New to the forum, Stepside bed questions
Quote:
/C |
|
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Jan 2009
Location: Burbank, CA
Posts: 3,611
|
Re: New to the forum, Stepside bed questions
Yes the wood goes in between the cross sills and the bed sides. The 60-66 are probably different where it connects to the frame. Even the 60-62 will be different then the 63-66 because the rear of the frame on a 60-62 is wider than 63-66. I would take photos for you but my truck is at the paint shop in peaces. Do a smart search. I know there are threads on here that talk about the order of the cross sills and they probably have pictures.
|
![]() |
![]() |
![]() |
#5 | |
Registered User
Join Date: Mar 2016
Location: Uppsala
Posts: 32
|
Re: New to the forum, Stepside bed questions
Quote:
There is differnet answers on this question ![]() between bedside-cross sill on 63-66, but on 60-62 there is wood between so that is confusing me a little bit /C |
|
![]() |
![]() |
![]() |
#6 |
Moderator
![]() ![]() Join Date: Aug 2011
Location: China Spring, TX
Posts: 7,280
|
Re: New to the forum, Stepside bed questions
Instructions on various beds:
http://www.mar-k.com/installation_hints.aspx
__________________
Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats? |
![]() |
![]() |
![]() |
#7 |
Registered User
Join Date: Jan 2009
Location: Burbank, CA
Posts: 3,611
|
Re: New to the forum, Stepside bed questions
When I originally took my bed apart and it had what I thought was the original wood. The wood did not go all the way to the wall of the bed but the vary edge (where it has the bump) of the L shaped rail that is welded to the bed side rested on the wood. If some trucks came with no wood in between there, there would be either a vary strange gap or the wood would sit above the L shaped bracket. Which I could not imagine. Also the edge peaces of wood would only be held down on one side and that would not work for vary long. I wish I had a picture.
|
![]() |
![]() |
![]() |
#8 |
Registered User
Join Date: Jan 2009
Location: Burbank, CA
Posts: 3,611
|
Re: New to the forum, Stepside bed questions
Here is a photo of a 63. I know it is a little dark but you can see where the L shaped rails are sitting on the wood. The second photo is a 62 and does not have original wood but it also has the wood in between.
|
![]() |
![]() |
![]() |
#9 |
Registered User
Join Date: Jan 2009
Location: Burbank, CA
Posts: 3,611
|
Re: New to the forum, Stepside bed questions
I am not trying to beat this to death. I am just trying to help.
|
![]() |
![]() |
![]() |
#10 |
Moderator
![]() ![]() Join Date: Aug 2011
Location: China Spring, TX
Posts: 7,280
|
Re: New to the forum, Stepside bed questions
![]() ![]()
__________________
Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats? |
![]() |
![]() |
![]() |
#11 |
Registered User
Join Date: Jan 2013
Location: Columbia, SC
Posts: 1,927
|
Re: New to the forum, Stepside bed questions
The angle strips are spot welded to the bed sides at the factory. There is at least one bolt hole where the fender bolt goes through the angle strip too. I was amazed to find that the bed sides actually rest on the wood bed by the angle strips. However, additional support is supplied by the fender braces, front header panel and rear bed panel under the tailgate. I hope these pics help a little. The last photo shows my initial preparation before welding the angle strips in place.
__________________
My 65 C10 build: www.lugnutz65chevystepside.weebly.com Want to know more about T5 transmissions? My website has a T5 Info Page and a Step by Step T5 rebuild. |
![]() |
![]() |
![]() |
#12 |
Registered User
Join Date: Mar 2016
Location: Uppsala
Posts: 32
|
Re: New to the forum, Stepside bed questions
Thank you all guys, seems i got very good answers :-).
How thick is the wood that goes in between anglestrip and cross sill? /C |
![]() |
![]() |
![]() |
#13 |
Registered User
Join Date: Aug 2012
Location: Fort Campbell, KY
Posts: 494
|
Re: New to the forum, Stepside bed questions
Cross sills are 72". I am using 2x2 tubing. If you email me at int.execv@gmail.com I will send you a digital manual that has most (if not all) dimensions and anything else you could want. That goes for everyone else too.
__________________
AIR ASSAULT |
![]() |
![]() |
![]() |
#14 | |
Registered User
Join Date: Mar 2016
Location: Uppsala
Posts: 32
|
Re: New to the forum, Stepside bed questions
Quote:
/C |
|
![]() |
![]() |
![]() |
#15 |
Moderator
![]() ![]() Join Date: Aug 2011
Location: China Spring, TX
Posts: 7,280
|
Re: New to the forum, Stepside bed questions
Some great info on lengths, width ect on bed wood:
http://www.gmcpauls.com/47-72_BedWood_Info.htm
__________________
Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats? |
![]() |
![]() |
![]() |
#16 | |
Registered User
Join Date: Mar 2016
Location: Uppsala
Posts: 32
|
Re: New to the forum, Stepside bed questions
Quote:
/C |
|
![]() |
![]() |
![]() |
#17 |
Registered User
Join Date: Aug 2012
Location: Fort Campbell, KY
Posts: 494
|
|
![]() |
![]() |
![]() |
Bookmarks |
|
|