Firewall Insulation Pad - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1redbowtie3 · 03-16-2016, 10:23 PM

Anyone replace one? Any tips would be appreciated ..

bbbc10 · 03-16-2016, 11:01 PM

Most ppl dont run them from what i seen....u will see someone now an then with one

Pontiac1976 · 03-16-2016, 11:07 PM

You have to have a lot of stuff out. Do you have a/c or not?
WO/AC is less work
I still try to find a none /ac pad.

GSOUTHERN · 03-16-2016, 11:17 PM

To put it in correctly you have to have pretty much everything out from under the dash. I just tried putting one from LMC in my 83 with a/c and could not get it to fit right at all, I'll make you a good deal on it!! I ended up getting one from somewhere else and it worked good, I will post tomorrow where it came from, I can't think of it right now

chrismoore701 · 03-17-2016, 07:38 AM

I put a double layer of that foil insulation from Home Depot up there

1redbowtie3 · 03-17-2016, 10:06 AM

Well that's kinda what I thought just glancing at it, lots of labor .. thanks, I think I'll look into alternatives.

What are your impressions of the foil?

GSOUTHERN · 03-17-2016, 10:32 AM

USA1 Industries Inc is were I ordered the insulation pad that fit really good

Pontiac1976 · 03-17-2016, 09:25 PM

Quote:

Originally Posted by GSOUTHERN

USA1 Industries Inc is were I ordered the insulation pad that fit really good

Do you if they sell none a/c pad

GSOUTHERN · 03-17-2016, 09:33 PM

I believe they do sell the non a/c pad

Pontiac1976 · 03-17-2016, 09:59 PM

10-4

Thanks

03-16-2016, 10:23 PM	#1
1redbowtie3 Registered User Join Date: Jan 2016 Location: Hood County Texas Posts: 63	Firewall Insulation Pad Anyone replace one? Any tips would be appreciated .. __________________ 1985 K20 4spd 1978 K20 4spd

03-16-2016, 11:01 PM	#2
bbbc10 Diggin The SquareLife Join Date: Dec 2010 Location: garland,tx Posts: 1,933	Re: Firewall Insulation Pad Most ppl dont run them from what i seen....u will see someone now an then with one

03-16-2016, 11:07 PM	#3
Pontiac1976 Registered User Join Date: Oct 2015 Location: Ottawa, Ontario, Canada Posts: 805	Re: Firewall Insulation Pad You have to have a lot of stuff out. Do you have a/c or not? WO/AC is less work I still try to find a none /ac pad. __________________ 1977 REG cab Long Bed with a 1984 Front Clip, 82 305 .60 over 9.0.1 flat top pistons, 4bbl, TH350, w/84 SS-intake & cam , w/ 1977 big block rad, 1975 gear box, 1984 master w/ metric fittings top & SAE fitting @ portion block, 1975 3.42 gear open diff. Duel 77-87 Factory air cleaner, duel inlet from rad support . Down sized 9' to new 8' Steel flat bed Was a 77 454 w/308 gear. Taken out 550 lbs. up front with motor clip change.

03-16-2016, 11:17 PM	#4
GSOUTHERN Registered User Join Date: Nov 2014 Location: ALVA, FLORIDA Posts: 113	Re: Firewall Insulation Pad To put it in correctly you have to have pretty much everything out from under the dash. I just tried putting one from LMC in my 83 with a/c and could not get it to fit right at all, I'll make you a good deal on it!! I ended up getting one from somewhere else and it worked good, I will post tomorrow where it came from, I can't think of it right now

03-17-2016, 07:38 AM	#5
chrismoore701 Registered User Join Date: Dec 2004 Location: Highland, IN Posts: 2,353	Re: Firewall Insulation Pad I put a double layer of that foil insulation from Home Depot up there __________________ Chris _______________________________ 1979 Chevy Stepside SPORT 2018 Chevy Silverado, 39 years apart My build 2008-2016. http://m.imgur.com/a/bURrE

03-17-2016, 10:06 AM	#6
1redbowtie3 Registered User Join Date: Jan 2016 Location: Hood County Texas Posts: 63	Re: Firewall Insulation Pad Well that's kinda what I thought just glancing at it, lots of labor .. thanks, I think I'll look into alternatives. What are your impressions of the foil? __________________ 1985 K20 4spd 1978 K20 4spd

03-17-2016, 10:32 AM	#7
GSOUTHERN Registered User Join Date: Nov 2014 Location: ALVA, FLORIDA Posts: 113	Re: Firewall Insulation Pad USA1 Industries Inc is were I ordered the insulation pad that fit really good

03-17-2016, 09:33 PM	#9
GSOUTHERN Registered User Join Date: Nov 2014 Location: ALVA, FLORIDA Posts: 113	Re: Firewall Insulation Pad I believe they do sell the non a/c pad

03-17-2016, 09:59 PM	#10
Pontiac1976 Registered User Join Date: Oct 2015 Location: Ottawa, Ontario, Canada Posts: 805	Re: Firewall Insulation Pad 10-4 Thanks __________________ 1977 REG cab Long Bed with a 1984 Front Clip, 82 305 .60 over 9.0.1 flat top pistons, 4bbl, TH350, w/84 SS-intake & cam , w/ 1977 big block rad, 1975 gear box, 1984 master w/ metric fittings top & SAE fitting @ portion block, 1975 3.42 gear open diff. Duel 77-87 Factory air cleaner, duel inlet from rad support . Down sized 9' to new 8' Steel flat bed Was a 77 454 w/308 gear. Taken out 550 lbs. up front with motor clip change.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.