|
03-19-2016, 06:16 PM
|
#1 |
|
Registered User
 Join Date: Feb 2016
Location: Valrico, Florida
Posts: 661
|
1966 C10 Cowl Repair
Need some advise on this. I removed the complete inner cowl panels on both sides to expose the underside. This is where all the debris would have built up. Some one in the past went under the dash for the repairs. Trying to permanantly and correctly fix this. Obviously there are no repair panels for this. The entire cab has also been media blasted. I was considering cutting out the rotted metal since there is now good metal from underneath. Would it be practical to use Metal 2 Metal fill or maybe Tiger hair? I want to permanantly waterproof and seal this area for good. Or do i need to add new metal? Then seal?
Also i have to replace the water divertors on both sides. Any experience on this. Thanks! |
|
|
|
03-19-2016, 06:45 PM
|
#2 |
|
One foot in front of the other
Join Date: Aug 2008
Location: Parrottsville, TN
Posts: 5,443
|
Re: 1966 C10 Cowl Repair
Pics?
|
|
|
|
|
03-19-2016, 07:04 PM
|
#3 |
|
Registered User
Join Date: Feb 2016
Location: Valrico, Florida
Posts: 661
|
Re: 1966 C10 Cowl Repair
Im trying to attach some pixs. First is my truck. 2nd one shows someone on this website that i found. Appears i should cur out the bad like they did. What should next step be?
|
|
|
|
|
03-19-2016, 07:05 PM
|
#4 |
|
Registered User
Join Date: Feb 2016
Location: Valrico, Florida
Posts: 661
|
Re: 1966 C10 Cowl Repair
Missed 1st pix
|
|
|
|
|
03-19-2016, 07:08 PM
|
#5 |
|
Registered User
Join Date: Feb 2016
Location: Valrico, Florida
Posts: 661
|
Re: 1966 C10 Cowl Repair
Found a pic of someone cutting out section
|
|
|
|
|
03-19-2016, 10:41 PM
|
#6 |
|
One foot in front of the other
Join Date: Aug 2008
Location: Parrottsville, TN
Posts: 5,443
|
Re: 1966 C10 Cowl Repair
Kinda hard to tell what the damage on your truck needs from the pics. I would think that you could just make some patch pieces though.
|
|
|
|
|
03-20-2016, 12:06 AM
|
#7 |
|
60-66 Nut
 Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,251
|
Re: 1966 C10 Cowl Repair
Using the metal 2 metal or tiger hair will not be a long term/permanent fix. Replacing the area with steel and then sealing/coating it will be the best that can be done.
__________________
Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE |
|
|
|
|
03-20-2016, 08:08 AM
|
#8 |
|
Registered User
Join Date: Feb 2016
Location: Valrico, Florida
Posts: 661
|
Re: 1966 C10 Cowl Repair
Ok. What kind of sealing and coating after the metal replacement?
|
|
|
|
|
03-20-2016, 11:43 PM
|
#9 |
|
60-66 Nut
Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,251
|
Re: 1966 C10 Cowl Repair
I prefer to use an epoxy primer over properly prepped steel. Then that should be top coated with some sort of paint to seal it. You could also top coat it with a bedliner type of material or a insulating/sound deadening material such as Lizard Skin. You could also use something like POR15 over the bare steel.
__________________
Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE |
|
|
|
|
03-21-2016, 06:31 AM
|
#10 |
|
Registered User
Join Date: Feb 2016
Location: Valrico, Florida
Posts: 661
|
Re: 1966 C10 Cowl Repair
Thanks
|
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
