Bench Seat Bracket Question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

C10agent · 03-22-2016, 04:17 AM

I have done some research on the site and have found that seat brackets from 67 - 72 are different. The seat in my 72 c10 has never bolted in the factory spots. I assume it is a 67 - 72 seat. Can I get a set of 72 bench seat brackets and bolt to seat or is there serious modification?? I appreciate the help!

**special-K** · 03-22-2016, 06:11 AM

There are three designs, 67/68, 69/70, and 71/72. They all bolt to the floor the same. The difference is in appearance and how they bolt to the seat. I guess you need to know the year of your seat to know which brackets you need

C10agent · 03-22-2016, 08:33 AM

So you are saying all brackets are the same bolt pattern to attach to the floor?

**special-K** · 03-22-2016, 09:44 PM

Yes. The '73-87 brackets are longer. The front holes will line up, but not the rear.

03-22-2016, 04:17 AM	#1
C10agent Registered User Join Date: Aug 2013 Location: Navasota, TX Posts: 708	Bench Seat Bracket Question I have done some research on the site and have found that seat brackets from 67 - 72 are different. The seat in my 72 c10 has never bolted in the factory spots. I assume it is a 67 - 72 seat. Can I get a set of 72 bench seat brackets and bolt to seat or is there serious modification?? I appreciate the help! __________________ Neil............... 1972 C10 SWB - Shop Truck in the Works 5.3 LS / Full Air Ride / Rear Notch 20" American Racing Daytonas IG - neilioustx - pictures of build/progress Born and Raised in the Promised Land.... TEXAS Y'ALL!!

03-22-2016, 06:11 AM	#2
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Bench Seat Bracket Question There are three designs, 67/68, 69/70, and 71/72. They all bolt to the floor the same. The difference is in appearance and how they bolt to the seat. I guess you need to know the year of your seat to know which brackets you need __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

03-22-2016, 08:33 AM	#3
C10agent Registered User Join Date: Aug 2013 Location: Navasota, TX Posts: 708	Re: Bench Seat Bracket Question So you are saying all brackets are the same bolt pattern to attach to the floor? __________________ Neil............... 1972 C10 SWB - Shop Truck in the Works 5.3 LS / Full Air Ride / Rear Notch 20" American Racing Daytonas IG - neilioustx - pictures of build/progress Born and Raised in the Promised Land.... TEXAS Y'ALL!!

03-22-2016, 09:44 PM	#4
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Bench Seat Bracket Question Yes. The '73-87 brackets are longer. The front holes will line up, but not the rear. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.