Column Parts Question.. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**KyleSeal** · 04-09-2016, 07:34 PM

So this morning I'm tearing down my 70 C10's column to repair and inspect (wouldnt cancel the turn signal) and I found why. The cancelling springs are broken, not letting it cancel properly. I'm on a budget and found this part:

http://www.classicparts.com/1967-76-.../#.VwmQ6ym0Y7B

It says for 67-72 and 73-87 (w/ tilt column) .. my questions:

Does it mean any column for 67-72? It's the only option I have when I look besides the entire assembly.

If it is for tilt column (which I dont have), does it really matter that much? Or am I okay to order it?

hayhauler71 · 04-09-2016, 08:54 PM

you can just replace the springs if broken. Look in the help section of your auto parts store for replacements. Part number 49320

**KyleSeal** · 04-10-2016, 09:19 PM

Quote:

Originally Posted by hayhauler71

you can just replace the springs if broken. Look in the help section of your auto parts store for replacements. Part number 49320

What parts store did you get that number from?

hayhauler71 · 04-10-2016, 10:04 PM

Quote:

Originally Posted by KyleSeal

What parts store did you get that number from?

http://www.finddormanhelp.com/Produc...&cat=37&page=3

Sorry wrong part number pal 49312

**KyleSeal** · 04-12-2016, 07:03 PM

Quote:

Originally Posted by hayhauler71

you can just replace the springs if broken. Look in the help section of your auto parts store for replacements. Part number 49320

Quote:

Originally Posted by hayhauler71

http://www.finddormanhelp.com/Produc...&cat=37&page=3

Sorry wrong part number pal 49312

Thank you! I just ordered them.

04-09-2016, 07:34 PM	#1
KyleSeal Senior Member Join Date: Mar 2014 Location: Toano, VA Posts: 893	Column Parts Question.. So this morning I'm tearing down my 70 C10's column to repair and inspect (wouldnt cancel the turn signal) and I found why. The cancelling springs are broken, not letting it cancel properly. I'm on a budget and found this part: http://www.classicparts.com/1967-76-.../#.VwmQ6ym0Y7B It says for 67-72 and 73-87 (w/ tilt column) .. my questions: Does it mean any column for 67-72? It's the only option I have when I look besides the entire assembly. If it is for tilt column (which I dont have), does it really matter that much? Or am I okay to order it? __________________ "Sometimes I do serve as a good bad example. Glad to be of service." My Build Thread (1967 C10, lowered, EFI, daily truck): http://67-72chevytrucks.com/vboard/s...d.php?t=830809

04-09-2016, 08:54 PM	#2
hayhauler71 Registered User Join Date: Aug 2009 Location: St. Paul MN. Posts: 1,996	Re: Column Parts Question.. you can just replace the springs if broken. Look in the help section of your auto parts store for replacements. Part number 49320 __________________ Fuzzy Last edited by hayhauler71; 04-09-2016 at 08:59 PM. Reason: added part number



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.