67 Napco - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Dave K. · 04-14-2016, 12:37 AM

Great truck!

doo142 · 04-14-2016, 08:52 AM

Thanks guys, I'll keep you updated as I go.

**Grumpy old man** · 04-14-2016, 09:56 AM

If you plan to make it a flatbed keep the dump bed and plow for me when I come to pick it up ! Haha. I have a few short bed builders I might have to let go so I can make you an offer YOU WON'T REFUSE !
Posted via Mobile Device

1972RedNeck · 04-14-2016, 05:05 PM

Quote:

Originally Posted by doo142

Very cool, it is sporting 19.5's now. They are split rims but I think our local industrial tire shop will still work with them. I will find out soon!!

Are you sure they are 19.5's? 19.5's have tapered beads and have always been used tubeless on 1 piece wheels.

doo142 · 04-16-2016, 11:11 PM

Quote:

Originally Posted by 1972RedNeck

Are you sure they are 19.5's? 19.5's have tapered beads and have always been used tubeless on 1 piece wheels.

Nope.... I'm positive they are

doo142 · 04-16-2016, 11:16 PM

Quote:

Originally Posted by Grumpy old man

If you plan to make it a flatbed keep the dump bed and plow for me when I come to pick it up ! Haha. I have a few short bed builders I might have to let go so I can make you an offer YOU WON'T REFUSE !
Posted via Mobile Device

When you get it all together just bring the suit case full !!! Lol , thanks.

**Jeff's bowtie's** · 04-17-2016, 12:10 AM

In other words you better have deep pockets and he's not talking knee deep he's talking ankle deep lol

doo142 · 04-18-2016, 07:12 PM

Quote:

Originally Posted by Jeff's bowtie's

In other words you better have deep pockets and he's not talking knee deep he's talking ankle deep lol

I'm really liking this ole girl, money is almost easier to find than a 67 napco !!!

**special-K** · 04-18-2016, 08:01 PM

Depending on how much money, that statement is absolutely true! I don't think I have seen a dozen NAPCO light trucks from after GM started producing 4wds. So, they were all 1t. I've seen way more medium duties

1972RedNeck · 04-18-2016, 09:45 PM

Quote:

Originally Posted by doo142

Nope.... I'm positive they are

Do you have pictures of the wheels? Are they true split rim or are they lock-rings?

doo142 · 04-20-2016, 08:12 PM

Quote:

Originally Posted by 1972RedNeck

Do you have pictures of the wheels? Are they true split rim or are they lock-rings?

I thought it had the ring but after a quick look I did not see a split but it looks like 2 pieces

doo142 · 04-20-2016, 08:13 PM

Another

old Chevy guy · 04-20-2016, 08:58 PM

I had some 16" rims like that before. One is still around here the other rotted out and got scraped. It is a two piece rim but the ring is a solid loop. When you break it down there is a place on the front of the rim with a cut out of sorts that makes it possible to turn that ring over the part of the rim it locks into. Probably not describing it very well. After you let the air out you will have to beat that ring to get it to go down toward the tire .then you will see the place on the rim I speak of. I've see some 18" ones like that too but they where 10 bolt on a 72 3500 gmc. The front rotor only had 5 studs and used every other hole but the rear axle had 10

doo142 · 04-21-2016, 09:02 PM

Quote:

Originally Posted by old Chevy guy

I had some 16" rims like that before. One is still around here the other rotted out and got scraped. It is a two piece rim but the ring is a solid loop. When you break it down there is a place on the front of the rim with a cut out of sorts that makes it possible to turn that ring over the part of the rim it locks into. Probably not describing it very well. After you let the air out you will have to beat that ring to get it to go down toward the tire .then you will see the place on the rim I speak of. I've see some 18" ones like that too but they where 10 bolt on a 72 3500 gmc. The front rotor only had 5 studs and used every other hole but the rear axle had 10

Thanks for the info !!

doo142 · 04-23-2016, 11:47 PM

Quote:

Originally Posted by 1972RedNeck

Do you have pictures of the wheels? Are they true split rim or are they lock-rings?

Any input redneck ?

04-14-2016, 12:37 AM	#26
Dave K. Registered User Join Date: Jul 2009 Location: Milwaukee, WI Posts: 575	Re: 67 Napco Great truck!

04-14-2016, 08:52 AM	#27
doo142 Registered User Join Date: Jan 2013 Location: Bristol,In. Posts: 1,118	Re: 67 Napco Thanks guys, I'll keep you updated as I go. __________________ 72 Cheyenne k/20, Custom Camper 72 Cheyenne k/20 71 blazer K/5 2WD 454, 6 sp. 67 Chevy Napco c30 Dump 56 GMC Napco 4x4 short step 66 Chevy K10 68 Chevy C/30 4x4

04-14-2016, 09:56 AM	#28
Grumpy old man Senior Member Join Date: Dec 2013 Location: Gods country East,Tn Posts: 8,545	Re: 67 Napco If you plan to make it a flatbed keep the dump bed and plow for me when I come to pick it up ! Haha. I have a few short bed builders I might have to let go so I can make you an offer YOU WON'T REFUSE ! Posted via Mobile Device

04-17-2016, 12:10 AM	#32
Jeff's bowtie's Senior Member Join Date: Jan 2015 Location: Kearneysville Wv Posts: 3,948	Re: 67 Napco In other words you better have deep pockets and he's not talking knee deep he's talking ankle deep lol

04-18-2016, 08:01 PM	#34
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,852	Re: 67 Napco Depending on how much money, that statement is absolutely true! I don't think I have seen a dozen NAPCO light trucks from after GM started producing 4wds. So, they were all 1t. I've seen way more medium duties __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

04-20-2016, 08:13 PM	#37
doo142 Registered User Join Date: Jan 2013 Location: Bristol,In. Posts: 1,118	Re: 67 Napco Another Attached Images __________________ 72 Cheyenne k/20, Custom Camper 72 Cheyenne k/20 71 blazer K/5 2WD 454, 6 sp. 67 Chevy Napco c30 Dump 56 GMC Napco 4x4 short step 66 Chevy K10 68 Chevy C/30 4x4

04-20-2016, 08:58 PM	#38
old Chevy guy Registered User Join Date: Apr 2007 Location: Foster Rhode Island Posts: 1,176	Re: 67 Napco I had some 16" rims like that before. One is still around here the other rotted out and got scraped. It is a two piece rim but the ring is a solid loop. When you break it down there is a place on the front of the rim with a cut out of sorts that makes it possible to turn that ring over the part of the rim it locks into. Probably not describing it very well. After you let the air out you will have to beat that ring to get it to go down toward the tire .then you will see the place on the rim I speak of. I've see some 18" ones like that too but they where 10 bolt on a 72 3500 gmc. The front rotor only had 5 studs and used every other hole but the rear axle had 10



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.