The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 04-30-2016, 10:45 AM   #1
Redneck79
Registered User
 
Redneck79's Avatar
 
Join Date: Apr 2016
Location: Milan, Italy
Posts: 22
Turbocharged CUCV

I'm wondering to add a turbocharger to a 1984 K30 CUCV to have more power.
Any suggestions and experiences about ?
Redneck79 is offline   Reply With Quote
Old 04-30-2016, 05:45 PM   #2
Dead Parrot
Registered User
 
Join Date: Aug 2012
Location: Oklahoma City, OK
Posts: 2,611
Re: Turbocharged CUCV

Might check this site out: http://www.steelsoldiers.com/forumdi...d-Modification
Dead Parrot is offline   Reply With Quote
Old 04-30-2016, 07:16 PM   #3
wildwilly4x4
Registered User
 
Join Date: Aug 2009
Location: Sunray,TX
Posts: 251
Re: Turbocharged CUCV

I have one on my m1008. I didn't turn the fuel up much, so more power is there, but you really don't want much more than 6-8psi on a 6.2 if you want it to live long. Makes the power about like a stock 350
wildwilly4x4 is offline   Reply With Quote
Old 04-30-2016, 08:02 PM   #4
68Timber
I know the pieces fit
 
68Timber's Avatar
 
Join Date: Nov 2007
Location: MONTGOMERY, AL
Posts: 5,523
Re: Turbocharged CUCV

Quote:
Originally Posted by Dead Parrot View Post
There and dieselplace.com, lot's of diehard 6.2 guys there. In a nutshell, 6.5 turbo parts fit. Some massaging needed but not much.
__________________
John

79 2wd Blazer (Bruiser)
85 M1009 Blazer (Sarge) build
74 Honda Z50 build
68Timber is offline   Reply With Quote
Old 05-01-2016, 12:02 AM   #5
andrewmp6
Registered User
 
Join Date: Jan 2009
Location: Louisville,Ky
Posts: 5,811
Re: Turbocharged CUCV

http://bankspower.com/products/show/156/11
andrewmp6 is offline   Reply With Quote
Old 05-01-2016, 12:55 AM   #6
Edahall
Registered User
 
Join Date: May 2011
Location: Goliad, TX
Posts: 672
Re: Turbocharged CUCV

With a free flow exhaust and intake mods, you would be about 75% there compared to a Banks turbo and with a lot less complication.
__________________
1990 ¾ ton 4x4 Chevy Suburban
-Cummins Diesel - 12 valve - factory rebuilt
-6 speed bullet proof manual transmission - NV5600
-Gear Vendors Overdrive - HX35 Holset Turbo
-NP205 iron transfer case
-3.73 gears -2" Lift
Edahall is offline   Reply With Quote
Old 05-01-2016, 11:42 AM   #7
Redneck79
Registered User
 
Redneck79's Avatar
 
Join Date: Apr 2016
Location: Milan, Italy
Posts: 22
Re: Turbocharged CUCV

Quote:
Originally Posted by Edahall View Post
With a free flow exhaust and intake mods, you would be about 75% there compared to a Banks turbo and with a lot less complication.
Do you mean open pipes and an intake like in the videos ?

https://www.youtube.com/watch?v=MgCSwdhEWpk

https://www.youtube.com/watch?v=_tMioaIh3h8
Redneck79 is offline   Reply With Quote
Old 05-01-2016, 11:44 AM   #8
Redneck79
Registered User
 
Redneck79's Avatar
 
Join Date: Apr 2016
Location: Milan, Italy
Posts: 22
Re: Turbocharged CUCV

Thank you all for the infos !

In the end adding Banks turbo to open pipes and new intake is the best solution ?

Last edited by Redneck79; 05-01-2016 at 12:08 PM.
Redneck79 is offline   Reply With Quote
Old 05-01-2016, 03:26 PM   #9
68Timber
I know the pieces fit
 
68Timber's Avatar
 
Join Date: Nov 2007
Location: MONTGOMERY, AL
Posts: 5,523
Re: Turbocharged CUCV

When you buy the truck you may decide that the power is adequate since you're only planning to use it around town. The only time mine feels under powered is on the highway or interstate when I'm pulling our 6x12 open trailer with a few motorcycles on it. Around town it runs great even with 3.08 gears and bigger tires. The trucks you're looking at with 4.56 gears might give all the grunt you want up to 45 or 50 mph.
__________________
John

79 2wd Blazer (Bruiser)
85 M1009 Blazer (Sarge) build
74 Honda Z50 build
68Timber is offline   Reply With Quote
Old 05-01-2016, 06:21 PM   #10
Redneck79
Registered User
 
Redneck79's Avatar
 
Join Date: Apr 2016
Location: Milan, Italy
Posts: 22
Re: Turbocharged CUCV

Quote:
Originally Posted by 68Timber View Post
When you buy the truck you may decide that the power is adequate since you're only planning to use it around town. The only time mine feels under powered is on the highway or interstate when I'm pulling our 6x12 open trailer with a few motorcycles on it. Around town it runs great even with 3.08 gears and bigger tires. The trucks you're looking at with 4.56 gears might give all the grunt you want up to 45 or 50 mph.

Thanks, very useful info, so I could just open pipes, what do you think about ?
Redneck79 is offline   Reply With Quote
Old 05-01-2016, 09:19 PM   #11
68Timber
I know the pieces fit
 
68Timber's Avatar
 
Join Date: Nov 2007
Location: MONTGOMERY, AL
Posts: 5,523
Re: Turbocharged CUCV

The truck will have dual exhaust on it, you could put some type of free flowing mufflers on it if you want. When the original mufflers on mine started leaking I had new pipe put on with some used turbo mufflers I'd taken off my other truck. But personally I wouldn't bother with headers. Last time I looked they were around $650. For that price you can put on a turbo.
__________________
John

79 2wd Blazer (Bruiser)
85 M1009 Blazer (Sarge) build
74 Honda Z50 build
68Timber is offline   Reply With Quote
Old 05-01-2016, 11:35 PM   #12
Edahall
Registered User
 
Join Date: May 2011
Location: Goliad, TX
Posts: 672
Re: Turbocharged CUCV

The stock dual exhaust is pretty restrictive. I would ditch the system and install a 3" or larger super single with a big free flowing muffler such as a Donaldson. You'll also need to turn up the pump some after the mods.
__________________
1990 ¾ ton 4x4 Chevy Suburban
-Cummins Diesel - 12 valve - factory rebuilt
-6 speed bullet proof manual transmission - NV5600
-Gear Vendors Overdrive - HX35 Holset Turbo
-NP205 iron transfer case
-3.73 gears -2" Lift
Edahall is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 10:43 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com