Clyde's '65 BBW "Bonnie" - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

bumwine · 06-20-2016, 10:57 PM

Finally got her set on the ground tonight. I was like a kid in a candy store

La Zona Imagery · 06-20-2016, 11:09 PM

Quote:

Originally Posted by bumwine

Finally got her set on the ground tonight. I was like a kid in a candy store

Nice stance!

How are the front 4 inch drop springs working for you? Did you have to remove the bump stops? How about the rear? Cnotch?

bumwine · 06-20-2016, 11:15 PM

Quote:

Originally Posted by La Zona Imagery

Nice stance!

How are the front 4 inch drop springs working for you? Did you have to remove the bump stops? How about the rear? Cnotch?

I had to remove the bump stops. I didn't have to notch the rear I haven't even been able to make it bottom out by bouncing as hard as I could on the rear bumper. I pretty pumped with how it came out

La Zona Imagery · 06-20-2016, 11:19 PM

Quote:

Originally Posted by bumwine

I had to remove the bump stops. I didn't have to notch the rear I haven't even been able to make it bottom out by bouncing as hard as I could on the rear bumper. I pretty pumped with how it came out

Oh ok great! Those are the springs I am looking to get this summer.

bumwine · 06-20-2016, 11:22 PM

I was sweating it for awhile because I couldnt find any pictures of that setup. I like it though. Not gonna lie my lower control arms are damn low but I will survive

La Zona Imagery · 06-20-2016, 11:26 PM

Quote:

Originally Posted by bumwine

I was sweating it for awhile because I couldnt find any pictures of that setup. I like it though. Not gonna lie my lower control arms are damn low but I will survive

Yeah i hear ya...I have been searching everywhere for someone who has the Hotchkis 4/6 springs. Never found anyone until i saw your truck. I just need to get a set and install them now

bumwine · 06-20-2016, 11:31 PM

Quote:

Originally Posted by La Zona Imagery

Yeah i hear ya...I have been searching everywhere for someone who has the Hotchkis 4/6 springs. Never found anyone until i saw your truck. I just need to get a set and install them now

I'll get some better pictures this week for you hopefully

ChrisDollins · 06-22-2016, 11:56 PM

Oh man! Glad to see it sitting on the ground again. Looks amazing. I looked at doing the 4/6 springs too, like La Z, but talked myself out of them just because I couldn't find anyone running them. Wish I would have now. Looks good man.

Chris

gringoloco · 06-23-2016, 12:20 AM

Looks great. Love the cragars. Need more pics!

bumwine · 06-23-2016, 07:39 AM

Quote:

Originally Posted by ChrisDollins

Oh man! Glad to see it sitting on the ground again. Looks amazing. I looked at doing the 4/6 springs too, like La Z, but talked myself out of them just because I couldn't find anyone running them. Wish I would have now. Looks good man.

Chris

I was pretty nervous not gonna lie

bumwine · 06-23-2016, 07:40 AM

Quote:

Originally Posted by gringoloco

Looks great. Love the cragars. Need more pics!

I will get some this week. I still need to do some spray paint removal on the drivers side

skyjgmc · 06-23-2016, 10:52 PM

Im following along always been a fan of this body style and the Patina of the truck makes this one that much better let alone the old school cragars. Love everything your doing to this truck. this is the only body style of GM I've never owned but like it the most

. Ive got my eye on one with great patina and want to purchase it to build up for my father to pull his boat to the lake in. this build is my inspiration for how I want his to look.

bumwine · 06-24-2016, 12:38 AM

Quote:

Originally Posted by skyjgmc

Im following along always been a fan of this body style and the Patina of the truck makes this one that much better let alone the old school cragars. Love everything your doing to this truck. this is the only body style of GM I've never owned but like it the most

. Ive got my eye on one with great patina and want to purchase it to build up for my father to pull his boat to the lake in. this build is my inspiration for how I want his to look.

Thanks! I have been inspired by many on this forum but never thought I'd be the one to inspire. Thanks for sharing! Cragars are my all time favorite

Mike's Classic '65 · 07-09-2016, 12:57 PM

Sub'd....I'm along for the ride!

I really like what you are doing with your '65! You are doing alot of what I have been considering but didn't know how it would turn out, now I do. Your 283 sounds mean. I can't wait to get mine running again.

Thanks!

bumwine · 07-30-2016, 03:53 AM

I tried to be fancy this week and took a couple pictures with my phone.

northern 85 · 07-30-2016, 07:03 AM

Luv it!!!!!!

SKT · 07-30-2016, 08:31 AM

Quote:

Originally Posted by bumwine

I tried to be fancy this week and took a couple pictures with my phone.

.
.

You succeeded, as those pics look awesome!

.
.

bumwine · 07-30-2016, 10:33 AM

Quote:

Originally Posted by SKT

.
.

You succeeded, as those pics look awesome!

.
.

I'm not gonna lie. I have to give a lot of credit to the light I accidentally parked under that gave the perfect lighting ha ha

ChrisDollins · 07-30-2016, 11:43 AM

Turned out awesome! Truck looks great man.

Chris

northern 85 · 07-31-2016, 06:48 AM

You could sell that shot as garage wall art ! I want one!!!

**Palf70Step** · 07-31-2016, 08:46 AM

The one I had was glued in the same way as the stock rear window was.

bumwine · 07-31-2016, 10:51 AM

Quote:

Originally Posted by Mike's Classic '65

Sub'd....I'm along for the ride!

I really like what you are doing with your '65! You are doing alot of what I have been considering but didn't know how it would turn out, now I do. Your 283 sounds mean. I can't wait to get mine running again.

Thanks!

I need to get some new video of it with the exhaust all on. Sounds a lot better now since I got the timing and carb adjusted

bumwine · 07-31-2016, 10:53 AM

Quote:

Originally Posted by Palf70Step

The one I had was glued in the same way as the stock rear window was.

I don't understand

**Palf70Step** · 07-31-2016, 01:26 PM

Quote:

Originally Posted by Palf70Step

The one I had was glued in the same way as the stock rear window was.

Quote:

Originally Posted by bumwine

I don't understand

The factory rear windows use some sorta of sealant/glue like the windshield does to seal them into place. Many of the aftermarket sliders, change that to the old style gasket instead of a glue/sealant typo put the window into place. I have not seen tape being used, but I guess it is possible to have a double sided sticky tape as you seal.

bumwine · 07-31-2016, 01:31 PM

Quote:

Originally Posted by Palf70Step

The factory rear windows use some sorta of sealant/glue like the windshield does to seal them into place. Many of the aftermarket sliders, change that to the old style gasket instead of a glue/sealant typo put the window into place. I have not seen tape being used, but I guess it is possible to have a double sided sticky tape as you seal.

Yeah but I don't know what started this topic

06-20-2016, 10:57 PM	#51
bumwine Registered User Join Date: Apr 2013 Location: Fort Worth, Texas Posts: 166	Re: Clyde's '65 BBW "Bonnie" Finally got her set on the ground tonight. I was like a kid in a candy store

06-20-2016, 11:22 PM	#55
bumwine Registered User Join Date: Apr 2013 Location: Fort Worth, Texas Posts: 166	Re: Clyde's '65 BBW "Bonnie" I was sweating it for awhile because I couldnt find any pictures of that setup. I like it though. Not gonna lie my lower control arms are damn low but I will survive

06-22-2016, 11:56 PM	#58
ChrisDollins Registered User Join Date: Apr 2011 Location: Pocahontas, AR Posts: 554	Re: Clyde's '65 BBW "Bonnie" Oh man! Glad to see it sitting on the ground again. Looks amazing. I looked at doing the 4/6 springs too, like La Z, but talked myself out of them just because I couldn't find anyone running them. Wish I would have now. Looks good man. Chris __________________ 1966 C10 http://67-72chevytrucks.com/vboard/s...d.php?t=615165 1968 GTO http://67-72chevytrucks.com/vboard/s...=1#post7650182

06-23-2016, 12:20 AM	#59
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,921	Re: Clyde's '65 BBW "Bonnie" Looks great. Love the cragars. Need more pics! __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

06-23-2016, 10:52 PM	#62
skyjgmc Registered User Join Date: Nov 2015 Location: Helena Posts: 123	Re: Clyde's '65 BBW "Bonnie" Im following along always been a fan of this body style and the Patina of the truck makes this one that much better let alone the old school cragars. Love everything your doing to this truck. this is the only body style of GM I've never owned but like it the most . Ive got my eye on one with great patina and want to purchase it to build up for my father to pull his boat to the lake in. this build is my inspiration for how I want his to look.

07-09-2016, 12:57 PM	#64
Mike's Classic '65 Registered User Join Date: May 2014 Location: Leesburg, Alabama Posts: 25	Re: Clyde's '65 BBW "Bonnie" Sub'd....I'm along for the ride! I really like what you are doing with your '65! You are doing alot of what I have been considering but didn't know how it would turn out, now I do. Your 283 sounds mean. I can't wait to get mine running again. Thanks! __________________ Mike OIF 2003-2004 Veteran (US Army) I support the Wounded Warrior Project "Gotta work on the nut behind the wheel before you start fixing bolts on the car"– Author Unknown My 1965 Chevy C10 LWB build thread

07-30-2016, 03:53 AM	#65
bumwine Registered User Join Date: Apr 2013 Location: Fort Worth, Texas Posts: 166	Re: Clyde's '65 BBW "Bonnie" I tried to be fancy this week and took a couple pictures with my phone.

07-30-2016, 07:03 AM	#66
northern 85 Registered User Join Date: Mar 2005 Location: Fairfield Maine Posts: 1,759	Re: Clyde's '65 BBW "Bonnie" Luv it!!!!!!

07-30-2016, 11:43 AM	#69
ChrisDollins Registered User Join Date: Apr 2011 Location: Pocahontas, AR Posts: 554	Re: Clyde's '65 BBW "Bonnie" Turned out awesome! Truck looks great man. Chris __________________ 1966 C10 http://67-72chevytrucks.com/vboard/s...d.php?t=615165 1968 GTO http://67-72chevytrucks.com/vboard/s...=1#post7650182

07-31-2016, 06:48 AM	#70
northern 85 Registered User Join Date: Mar 2005 Location: Fairfield Maine Posts: 1,759	Re: Clyde's '65 BBW "Bonnie" You could sell that shot as garage wall art ! I want one!!!

07-31-2016, 08:46 AM	#71
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 47,216	Re: Clyde's '65 BBW "Bonnie" The one I had was glued in the same way as the stock rear window was. __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.