Parts value and ?'s - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**too much stuff** · 03-13-2004, 07:57 PM

Just looked at a 68 3/4 ton 2wd. Engine is 350 4bbl, turbo 400 tranny, and 3:73 posi-traction. First of all, does this set-up seem correct for a 68? Next question, The rear end looking from behind is just a big round cover with 10 bolts around the cover and a drain plug about half way up the cover. According to the glovebox tag it reads Posi traction axle in one spot, and 3:73 gears in another spot. What kind of rear is this, and what is it worth? Any input is good. Thanks...

Vince M · 03-13-2004, 08:51 PM

By your description the rear end sounds like the Eaton 3/4 ton FF axle. Some things I've not heard of though. The Eaton didn't come with a 3.73 as far I as know. Lowest ratio was a 4.10. But you never know. And with posi also.
Same again... as far as I know the 350 wasn't available in 68. Let us know what you find out anyways.

**too much stuff** · 03-14-2004, 06:38 PM

Still thirsting for knowledge. sakohntr, longhornman...where you guys hiding?

**too much stuff** · 03-15-2004, 11:51 AM

TTT Opinions are welcome also.

Burnsman · 03-15-2004, 11:53 AM

I didn't think the 350 came out until 1969. But, I could be wrong.

Woody · 03-15-2004, 12:09 PM

It should have come with a 327 engine, not sure about the rear end.

griesel72 · 03-15-2004, 12:44 PM

I thought that the 350's first year in our trucks was 69, but not positive.

Good luck
David

**too much stuff** · 03-15-2004, 08:55 PM

He told me it is a 68, and definately has a 68 front clip on it. I could not read the vin in the glovebox, but could read where it said 350 engine. It also said chevrolet custom on the outside of the glovebox door like a 69 and newer. Possible to be a late 68? Still wondering about the rear end also.

**CPNE** · 03-15-2004, 09:05 PM

Could it possibly be a mismatched glove box door?

No 350 in 68 and a 3/4 ton rear would either be 4:10 or 4:56 dana or Corp, unless BB auto, then it's a 3:54 dana.

**too much stuff** · 03-15-2004, 09:14 PM

The glove box door seemed to match everything on the truck. Only other option is someone added a different front clip at one time. The guy that has it now has owned it for over 20 years. Even if the clip was changed, the 3:73 should still be original. Odometer reads 77K Which could be actual judging by the rest of the truck, however, i know it was painted at one time long ago.

**CPNE** · 03-15-2004, 09:26 PM

There are no full floater 3:73 rears I know of between 67-72. Are you sure it's a 3/4 ton? 3:73 is a half ton rear ratio.

**too much stuff** · 03-15-2004, 10:53 PM

The diff does not look like any half ton stuff that i have. It has dog dish hub caps on it so i couldn't see how many lug nuts it had. It had tall narrow bias tires with 16.5 split rims on it. The diff cover was round and smooth.(other than drain plug)

03-13-2004, 07:57 PM	#1
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,787	Parts value and ?'s Just looked at a 68 3/4 ton 2wd. Engine is 350 4bbl, turbo 400 tranny, and 3:73 posi-traction. First of all, does this set-up seem correct for a 68? Next question, The rear end looking from behind is just a big round cover with 10 bolts around the cover and a drain plug about half way up the cover. According to the glovebox tag it reads Posi traction axle in one spot, and 3:73 gears in another spot. What kind of rear is this, and what is it worth? Any input is good. Thanks... __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

03-13-2004, 08:51 PM	#2
Vince M Senior Member Join Date: Apr 2000 Location: Orlando, FL Posts: 1,076	By your description the rear end sounds like the Eaton 3/4 ton FF axle. Some things I've not heard of though. The Eaton didn't come with a 3.73 as far I as know. Lowest ratio was a 4.10. But you never know. And with posi also. Same again... as far as I know the 350 wasn't available in 68. Let us know what you find out anyways. __________________ ............................................................ 68 Chevy CST SWB w/LS1, carb & 700r4. Golden Anniversary clone with a few improvements.

03-14-2004, 06:38 PM	#3
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,787	Still thirsting for knowledge. sakohntr, longhornman...where you guys hiding? __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

03-15-2004, 11:51 AM	#4
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,787	TTT Opinions are welcome also. __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

03-15-2004, 11:53 AM	#5
Burnsman Chevy Freak Join Date: Sep 2002 Location: Meadville, Pa. Posts: 2,804	truck I didn't think the 350 came out until 1969. But, I could be wrong. __________________ 69 GMC SWB, 350 70 Chevy LWB, 350 55 chevy gasser, 461 73 Camaro, 496 67 RS Camaro, 406 64 Chevelle, 588 71 Nova, 565 67 Camaro, 461

03-15-2004, 12:09 PM	#6
Woody Registered User Join Date: Feb 2000 Location: Georgetown, KY, USA Posts: 631	It should have come with a 327 engine, not sure about the rear end.

03-15-2004, 12:44 PM	#7
griesel72 Senior Member Join Date: Apr 2003 Location: Howard, Kansas USA Posts: 1,997	I thought that the 350's first year in our trucks was 69, but not positive. Good luck David __________________ 1969 K10 Custom 10 1997 Z71 2006 Volkswagen Jetta TDI 2006 King Ranch 1980 Wife

03-15-2004, 08:55 PM	#8
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,787	He told me it is a 68, and definately has a 68 front clip on it. I could not read the vin in the glovebox, but could read where it said 350 engine. It also said chevrolet custom on the outside of the glovebox door like a 69 and newer. Possible to be a late 68? Still wondering about the rear end also. __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

03-15-2004, 09:05 PM	#9
CPNE Resident Curmudgeon Join Date: Dec 1999 Location: NH Posts: 6,662	Could it possibly be a mismatched glove box door? No 350 in 68 and a 3/4 ton rear would either be 4:10 or 4:56 dana or Corp, unless BB auto, then it's a 3:54 dana. __________________ Currently on or near the homestead: 67 Chevy SWB 2WD stepside 350/3 on tree (Pat's) 67 GMC SWB 2WD Fleet 402/auto (Brian's under construction) 67 Chevy 3/4 ton 2WD 402/auto (Business Hauler) 67 Chevy 1 ton dually 2WD 396/4 speed (Former business hauler, Needs TLC) 68 Chevy 1/2 ton Suburban 2WD 250 six/3 on tree (Brian's Needs TLC) 70 Chevy 3/4 ton 4WD 350/4 speed (Pat's - Disguised as a 68 GMC) 71 Chevy SWB stepside (Crushed by tree - parts donor) 72 Chevy 3/4 ton 4WD (Parts donor) 72 Chevy 3/4 ton 4WD Suburban (Parts Donor) 72 GMC 3/4 ton 4WD 292 six/4 speed (Mine - Disguised as a 67 GMC) 81 GMC 4WD Dually Dump Body 350/4 speed (Business Hauler) 82 Camaro Z/28 355/Super T-10 (Pat's toy) 93 Caprice 9C1 (Brian's Cop Car) 02 Toyota Camry (Reliable but a souless steel and plastic hulk) 2011 2SS RS Camaro M6 Factory Hurst Shifter Maybe I need to sell some of this crap Yet another Bozo with a sawz-all

03-15-2004, 09:14 PM	#10
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,787	The glove box door seemed to match everything on the truck. Only other option is someone added a different front clip at one time. The guy that has it now has owned it for over 20 years. Even if the clip was changed, the 3:73 should still be original. Odometer reads 77K Which could be actual judging by the rest of the truck, however, i know it was painted at one time long ago. __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

03-15-2004, 09:26 PM	#11
CPNE Resident Curmudgeon Join Date: Dec 1999 Location: NH Posts: 6,662	There are no full floater 3:73 rears I know of between 67-72. Are you sure it's a 3/4 ton? 3:73 is a half ton rear ratio. __________________ Currently on or near the homestead: 67 Chevy SWB 2WD stepside 350/3 on tree (Pat's) 67 GMC SWB 2WD Fleet 402/auto (Brian's under construction) 67 Chevy 3/4 ton 2WD 402/auto (Business Hauler) 67 Chevy 1 ton dually 2WD 396/4 speed (Former business hauler, Needs TLC) 68 Chevy 1/2 ton Suburban 2WD 250 six/3 on tree (Brian's Needs TLC) 70 Chevy 3/4 ton 4WD 350/4 speed (Pat's - Disguised as a 68 GMC) 71 Chevy SWB stepside (Crushed by tree - parts donor) 72 Chevy 3/4 ton 4WD (Parts donor) 72 Chevy 3/4 ton 4WD Suburban (Parts Donor) 72 GMC 3/4 ton 4WD 292 six/4 speed (Mine - Disguised as a 67 GMC) 81 GMC 4WD Dually Dump Body 350/4 speed (Business Hauler) 82 Camaro Z/28 355/Super T-10 (Pat's toy) 93 Caprice 9C1 (Brian's Cop Car) 02 Toyota Camry (Reliable but a souless steel and plastic hulk) 2011 2SS RS Camaro M6 Factory Hurst Shifter Maybe I need to sell some of this crap Yet another Bozo with a sawz-all

03-15-2004, 10:53 PM	#12
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,787	The diff does not look like any half ton stuff that i have. It has dog dish hub caps on it so i couldn't see how many lug nuts it had. It had tall narrow bias tires with 16.5 split rims on it. The diff cover was round and smooth.(other than drain plug) __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.