TX wtb buddy bucket hardware

[1968aj]

looking for any buddy bucket hardware or mounts. I have the seats center console and frame. need pretty much everything else. THANKS

[Grumpy old man]

The seat sliders are generic should be pretty easy to find , measure the distance of the seat mounts front to back and search them thru the aftermarket seat venders , originals may be tough to find .

[chewychevy67]

I have the passenger seat mounting plates that are powder coated. Shipping is 16 bucks and I'd like 20 for them so if your interested ideal them for 36 bucks shipped.

[1968aj]

[QUOTE=chewychevy67;7636096]I have the passenger seat mounting plates that are powder coated. Shipping is 16 bucks and I'd like 20 for them so if your interested ideal them for 36 bucks shipped.[/QUOTEnot sure what I am missing. do these bolt the seat directly to frame?

[1968aj]

Originally Posted by Grumpy old man

The seat sliders are generic should be pretty easy to find , measure the distance of the seat mounts front to back and search them thru the aftermarket seat venders , originals may be tough to find .

thanksi will look into that. if I had a picture of the bottom of a assembled set icould probably make up some of the parts

[68bowtie]

Originally Posted by 1968aj

thanksi will look into that. if I had a picture of the bottom of a assembled set icould probably make up some of the parts

not the best picture but you can see some of it...

[68bowtie]

also, you might be interested in this bad boy. it's been on ebay for a while...

www.ebay.com/itm/252439769766

[Grumpy old man]

Aftermarket conversion van seats use the same type seat sliders ,check your local junkyard , some guys use them for both driver and passengers .

[1968aj]

Originally Posted by 68bowtie

also, you might be interested in this bad boy. it's been on ebay for a while...

www.ebay.com/itm/252439769766

thanks for pics and link. that piece was the one I did get with the seats.

[chewychevy67]

[quote=1968aj;7636210]

Originally Posted by chewychevy67

I have the passenger seat mounting plates that are powder coated. Shipping is 16 bucks and I'd like 20 for them so if your interested ideal them for 36 bucks shipped.[/QUOTEnot sure what I am missing. do these bolt the seat directly to frame?

They do. I have another member contact me about these. Just wondering if you pass or not so I can let him know.

[1968aj]

[quote=chewychevy67;7636436]

Originally Posted by 1968aj

They do. I have another member contact me about these. Just wondering if you pass or not so I can let him know.

I will take them. let me know how you want payment. THANKS

[leddzepp]

Here is what the drivers side brackets look like.

[1968aj]

[quote=chewychevy67;7636436]

Originally Posted by 1968aj

They do. I have another member contact me about these. Just wondering if you pass or not so I can let him know.

PAYPAL SENT THANKS

[Silver68]

I have an extra center seat bracket that mounts on the cab 55.00 plus shipping
Interested I'll post pictures Thanks

[1968aj]

Originally Posted by Silver68

I have an extra center seat bracket that mounts on the cab 55.00 plus shipping
Interested I'll post pictures Thanks

if you have a picture that will let me know if I have that part or not. THANKS

[Silver68]

Originally Posted by 1968aj

if you have a picture that will let me know if I have that part or not. THANKS

Pics of bracket ready to install

[Jeff's bowtie's]

Hey silver68 If 1968aj is not interested I would be thanks Jeff

[1968aj]

Originally Posted by Silver68

Pics of bracket ready to install

thanks but I have that bracket

[chewychevy67]

passenger seat mounting brackets shipped this morning.

[1968aj]

Originally Posted by chewychevy67

passenger seat mounting brackets shipped this morning.

brackets made it here. I now have everything excluding the sliders. I believe I can find some that will work. all the picture you guys posted really helped.