Brake Booster interferes with Inline 6 Air Cleaner - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Lugnutz65 · 07-15-2016, 02:20 PM

I was afraid of this.

So my brake booster interferes with my air cleaner. Options?
1. smaller air cleaner housing. Suggestions?
2. Fabricate a new air cleaner housing.
3. Swap to the weber 32/36 I have sitting in the box. (I hate this option at this point of my build because the Rochester B is rebuilt and runs perfect).

So, I'm installing a 1995 Blazer power brake booster and MC with a CatainFab firewall bracket (Nice product BTW!).
The air cleaner housing is not going to fit because the booster is in the way.
I bought (and returned) the really small Mr Gasket air cleaner part #4354 because it didn't fit properly on my Rochester B carb. It said it was for 1 barrel carbs but the base ID was too small (barely).

**jayoldschool** · 07-15-2016, 05:17 PM

#4

Send me that air cleaner base to replace mine with the chopped off horn!

lol

62stepside longbox · 07-15-2016, 06:43 PM

Yeah I'm running into this same issue on my 62 with a 261 and an oil bath aircleaner. I think I'm going to have to get a smaller aircleaner

**aerotruk63** · 07-15-2016, 08:07 PM

There was an offset lowered air cleaner that was optioned for this reason.

Something like this:

**aerotruk63** · 07-15-2016, 08:11 PM

Quote:

Originally Posted by jayoldschool

#4

Send me that air cleaner base to replace mine with the chopped off horn!

lol

See I wanted more air inlet so I took a piece of 3" exhaust pipe and made a new snorkel. Changed the cover to the correct concave 63 style.

64shortbox · 07-15-2016, 08:28 PM

Would using a smaller dual diaphragm vacuum booster help? Like one from a 92 Chevy Astro Van or S10?

**slepysal** · 07-15-2016, 08:38 PM

I went with a small inch dual diaphragm booster for clearance issues with my Clifford intake. as mentioned they used an offset air cleaner for six's with power brakes.I will try to find a picture here is mine
Name: IMG_0902.jpg
Views: 942
Size: 57.1 KB

Name: IMG_0902.jpg
Views: 942
Size: 57.1 KB

**slepysal** · 07-15-2016, 08:44 PM

This is how the offset filter looks installed

http://67-72chevytrucks.com/vboard/a...1&d=1278277083

**aerotruk63** · 07-15-2016, 08:52 PM

rickoner · 07-15-2016, 09:21 PM

As others have said, the offset air cleaner is what was used. I have a setup from a 67-72 that I tried to install in my 65 with a 292, but unfortunately it interfered with the heater box. If you don't plan on running the factory heater you could go that route too. If you can't find one out there, I'd be willing to offer mine up.

Lugnutz65 · 07-15-2016, 09:53 PM

Quote:

Originally Posted by aerotruk63

See I wanted more air inlet so I took a piece of 3" exhaust pipe and made a new snorkel. Changed the cover to the correct concave 63 style.

Good idea. I have extra factory air cleaners but shipping to Canada might prove to be too expensive.

Quote:

Originally Posted by 64shortbox

Would using a smaller dual diaphragm vacuum booster help? Like one from a 92 Chevy Astro Van or S10?

Yes, I suppose it would solve the problem.. However I really want to keep the budget down and using this booster and MC helps.

Quote:

Originally Posted by slepysal

I went with a small inch dual diaphragm booster for clearance issues with my Clifford intake. as mentioned they used an offset air cleaner for six's with power brakes.I will try to find a picture here is mine
Attachment 1552936

I think I'll have trouble finding an offset air cleaner setup. I had forgotten about that option. I may just cut up one of my factory air cleaner.

Quote:

Originally Posted by aerotruk63

Thanks for the helpful picture.

07-15-2016, 02:20 PM	#1
Lugnutz65 Registered User Join Date: Jan 2013 Location: Columbia, SC Posts: 1,927	Brake Booster interferes with Inline 6 Air Cleaner I was afraid of this. So my brake booster interferes with my air cleaner. Options? 1. smaller air cleaner housing. Suggestions? 2. Fabricate a new air cleaner housing. 3. Swap to the weber 32/36 I have sitting in the box. (I hate this option at this point of my build because the Rochester B is rebuilt and runs perfect). So, I'm installing a 1995 Blazer power brake booster and MC with a CatainFab firewall bracket (Nice product BTW!). The air cleaner housing is not going to fit because the booster is in the way. I bought (and returned) the really small Mr Gasket air cleaner part #4354 because it didn't fit properly on my Rochester B carb. It said it was for 1 barrel carbs but the base ID was too small (barely). Attached Images __________________ My 65 C10 build: www.lugnutz65chevystepside.weebly.com Want to know more about T5 transmissions? My website has a T5 Info Page and a Step by Step T5 rebuild.

07-15-2016, 05:17 PM	#2
jayoldschool Moderator Join Date: Dec 2012 Location: ON, Canada Posts: 2,176	Re: Brake Booster interferes with Inline 6 Air Cleaner #4 Send me that air cleaner base to replace mine with the chopped off horn! lol

07-15-2016, 06:43 PM	#3
62stepside longbox Registered User Join Date: Aug 2015 Location: Kelowna, B.C, Canada Posts: 1,747	Re: Brake Booster interferes with Inline 6 Air Cleaner Yeah I'm running into this same issue on my 62 with a 261 and an oil bath aircleaner. I think I'm going to have to get a smaller aircleaner __________________ Nik...................____ 62 lwb c10 step-side 261 5 spd .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/ my build thread. Sending unit solution

07-15-2016, 08:28 PM	#6
64shortbox Registered User Join Date: Jan 2011 Location: Tulare, CA Posts: 734	Re: Brake Booster interferes with Inline 6 Air Cleaner Would using a smaller dual diaphragm vacuum booster help? Like one from a 92 Chevy Astro Van or S10?

07-15-2016, 08:38 PM	#7
slepysal Registered User Join Date: Oct 2006 Location: San Jose NOR*CAL Posts: 3,080	Re: Brake Booster interferes with Inline 6 Air Cleaner I went with a small inch dual diaphragm booster for clearance issues with my Clifford intake. as mentioned they used an offset air cleaner for six's with power brakes.I will try to find a picture here is mine __________________ 1960 Apache long bed fleet L6 250 Clifford intake 2 bbl carb. Langdon cast headers with dual exhaust and bellflower tips. T-5 5 speed, power steering and power disc brakes. "Over, Around or through it... "

07-15-2016, 08:07 PM	#4
aerotruk63 Check The Champ, Demonstrator Join Date: Jun 2009 Location: Montreal,Quebec Posts: 6,627	Re: Brake Booster interferes with Inline 6 Air Cleaner There was an offset lowered air cleaner that was optioned for this reason. Something like this: __________________ 1963 *Chevrolet Truck* Literature LINK: https://picasaweb.google.com/113840717762774560215 YouTube Channel with 20+ Original *Chevrolet Truck* Salesmen, Mechanics & Service Department Training Slideshows. https://www.youtube.com/results?sear...otruk63&page=1 Last edited by aerotruk63; 07-15-2016 at 08:40 PM.

07-15-2016, 08:44 PM	#8
slepysal Registered User Join Date: Oct 2006 Location: San Jose NOR*CAL Posts: 3,080	Re: Brake Booster interferes with Inline 6 Air Cleaner This is how the offset filter looks installed http://67-72chevytrucks.com/vboard/a...1&d=1278277083 __________________ 1960 Apache long bed fleet L6 250 Clifford intake 2 bbl carb. Langdon cast headers with dual exhaust and bellflower tips. T-5 5 speed, power steering and power disc brakes. "Over, Around or through it... "

07-15-2016, 08:52 PM	#9
aerotruk63 Check The Champ, Demonstrator Join Date: Jun 2009 Location: Montreal,Quebec Posts: 6,627	Re: Brake Booster interferes with Inline 6 Air Cleaner __________________ 1963 *Chevrolet Truck* Literature LINK: https://picasaweb.google.com/113840717762774560215 YouTube Channel with 20+ Original *Chevrolet Truck* Salesmen, Mechanics & Service Department Training Slideshows. https://www.youtube.com/results?sear...otruk63&page=1

07-15-2016, 09:21 PM	#10
rickoner Registered User Join Date: Apr 2014 Location: pittsburgh, pa Posts: 258	Re: Brake Booster interferes with Inline 6 Air Cleaner As others have said, the offset air cleaner is what was used. I have a setup from a 67-72 that I tried to install in my 65 with a 292, but unfortunately it interfered with the heater box. If you don't plan on running the factory heater you could go that route too. If you can't find one out there, I'd be willing to offer mine up.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.