|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
08-06-2016, 10:31 PM
|
#1 |
|
Registered User
Join Date: Dec 2011
Location: austin,tx
Posts: 47
|
Hazard lights/flarestat 105 problems
I installed a flarestat 105 on my '63 that I got on ebay. So far the light (on the knob) comes on and the front passenger flashes. I connected the flarestate wires to yellow, green, light blue and dark blue on the steering column harness. It should work according to the diagram found here:
http://6066gmcguy.com/turnlights1.html All the signals work otherwise. Should I start troubleshooting the switch? or did I wire it wrong? |
|
|
|
08-07-2016, 12:23 AM
|
#2 |
|
Registered User
Join Date: Jun 2013
Location: joshua tree ca.
Posts: 1,484
|
Re: Hazard lights/flarestat 105 problems
I would open up the switch check all contacts and clean and lube
|
|
|
|
|
08-07-2016, 01:45 AM
|
#3 |
|
Registered User
Join Date: Dec 2011
Location: austin,tx
Posts: 47
|
Re: Hazard lights/flarestat 105 problems
Will do thanks!
|
|
|
|
|
08-07-2016, 04:30 PM
|
#4 |
|
Senior Member
 Join Date: Jun 2015
Location: Moose Jaw, SK
Posts: 511
|
Re: Hazard lights/flarestat 105 problems
How many wires does your flarestat have coming out? Mine has 9 wires coming from it, and I'm trying to figure out what they all mean.
__________________
1961 GMC half ton, short step, Canadian model. Just starting work on it. |
|
|
|
|
08-07-2016, 07:47 PM
|
#5 |
|
Registered User
Join Date: Dec 2011
Location: austin,tx
Posts: 47
|
Re: Hazard lights/flarestat 105 problems
I have 5 wires. 4 for each side and one for power. The wire colors on the switch are random. Black, red, brown etc. But the wire for power already had a fuse and is connected to a flasher.
|
|
|
|
|
08-08-2016, 10:36 PM
|
#6 | |
|
Registered User
Join Date: Dec 2011
Location: austin,tx
Posts: 47
|
Re: Hazard lights/flarestat 105 problems
Quote:
|
|
|
|
|
|
| Bookmarks |
|
|
Linear Mode
