rear window regulator rollers - The 1947 - Present Chevrolet & GMC Truck Message Board Network

grillzy · 08-10-2016, 08:08 PM

I need to replace the rear window regulator plastic rollers. Will this fit properly? http://www.dormanproducts.com/itemde...9&SEName=74430 or are these for the driver and passenger doors?
1988 Blazer power rear window

68Timber · 08-10-2016, 10:37 PM

Have you removed the regulator yet? Just curious, I haven't pulled one out of the tailgate yet but I couldn't see how to remove the rollers on the door regulators. I ended up replacing the whole unit.

grillzy · 08-11-2016, 09:03 AM

You grind them off and knock them out. spot weld or pound new ones over like a rivet.

phillipm · 08-11-2016, 01:58 PM

I used a riveting tool meant for the type of rivets you receive in the kits. We had one at work. Part # HD-39787 I know they are expensive but I'm sure there are off brand versions that would work.

Ski-me · 08-13-2016, 09:34 AM

You got me curious so I decided to look into my rear window rollers this morning. What I found was that the rear rollers are smaller than the ones in the kit. I got the 3 roller kit last night and from the pic, they are obviously too big.

grillzy · 08-13-2016, 07:18 PM

you are right. I just ordered the ones from LMC. Thanks.

08-10-2016, 08:08 PM	#1
grillzy Registered User Join Date: Jan 2014 Location: belleville ontario Posts: 354	rear window regulator rollers I need to replace the rear window regulator plastic rollers. Will this fit properly? http://www.dormanproducts.com/itemde...9&SEName=74430 or are these for the driver and passenger doors? 1988 Blazer power rear window

08-10-2016, 10:37 PM	#2
68Timber I know the pieces fit Join Date: Nov 2007 Location: MONTGOMERY, AL Posts: 5,523	Re: rear window regulator rollers Have you removed the regulator yet? Just curious, I haven't pulled one out of the tailgate yet but I couldn't see how to remove the rollers on the door regulators. I ended up replacing the whole unit. __________________ John 79 2wd Blazer (Bruiser) 85 M1009 Blazer (Sarge) build 74 Honda Z50 build

08-11-2016, 09:03 AM	#3
grillzy Registered User Join Date: Jan 2014 Location: belleville ontario Posts: 354	Re: rear window regulator rollers You grind them off and knock them out. spot weld or pound new ones over like a rivet.

08-11-2016, 01:58 PM	#4
phillipm Registered User Join Date: Oct 2014 Location: Scottsdale, AZ Posts: 465	Re: rear window regulator rollers I used a riveting tool meant for the type of rivets you receive in the kits. We had one at work. Part # HD-39787 I know they are expensive but I'm sure there are off brand versions that would work.

08-13-2016, 09:34 AM	#5
Ski-me Registered User Join Date: May 2012 Location: Colo Springs, CO Posts: 870	Re: rear window regulator rollers You got me curious so I decided to look into my rear window rollers this morning. What I found was that the rear rollers are smaller than the ones in the kit. I got the 3 roller kit last night and from the pic, they are obviously too big. Attached Images __________________ - Jeff 89' K5 Blazer, 2.5" lift, 35" tires 04' GMC Yukon XL, 3/4 ton, 8.1L

08-13-2016, 07:18 PM	#6
grillzy Registered User Join Date: Jan 2014 Location: belleville ontario Posts: 354	Re: rear window regulator rollers you are right. I just ordered the ones from LMC. Thanks.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.