NM WTB: A.I.R. Smog pump Parts for SBC

[DeadheadNM]

Chasing one of the mount brackets (shown below), pump w pulley, thing that attaches to pump, and injection tubes. Could also use the manifold heat stove for the AIR system for 4wd application. Thanks, Pete

[johnscab]

Originally Posted by DeadheadNM

Chasing one of the mount brackets (shown below), pump w pulley, thing that attaches to pump, and injection tubes. Could also use the manifold heat stove for the AIR system for 4wd application. Thanks, Pete

not mine. but i can inquie, pick up and ship if you want...

http://sandiego.craigslist.org/esd/pts/5705027032.html

[DeadheadNM]

Originally Posted by johnscab

not mine. but i can inquie, pick up and ship if you want...

http://sandiego.craigslist.org/esd/pts/5705027032.html

Thanks for the offer! I really appreciate it. The parts appear different than those I'm after for a 72 so will pass. If I can help you with any needed parts please let me know. Pete

[johnscab]

Originally Posted by DeadheadNM

Thanks for the offer! I really appreciate it. The parts appear different than those I'm after for a 72 so will pass. If I can help you with any needed parts please let me know. Pete

No worries! and thanks for the offer! I may need some help locating things from time to time. Cheers! John

[randy500]

I think that bracket and the manifold that bolts onto the air pump could be the same as C3 corvettes, 68-82. The later model stuff is a little different but those vettes mounted the AIR pump like the one in the picture and had short water pumps to. Try the corvette parts houses, maybe Wilcox has that stuff? Could also try the corvetteforum.

[Classic Bowties]

Hey Pete, here are the small block smog parts that we spoke about end of last week, this stuff was removed from a very original survivor CA. 72 C10 w/350. The setup contains, both smog pump mounting brackets, pump pulley, diverter valve and both diverter valve to injection tube check valve hoses with correct OE markings and all four witek clamps. $125. plus $14. on the shipping, can combine ship the horn parts in with this stuff if needed. Again, sorry for the delay in getting this smog and horn stuff pulled out. Let us know, Mel.

[Classic Bowties]

Last four pics...

[jr1000yarder]

Man if that was for a BBC I'd be all over it!

[Classic Bowties]

Originally Posted by jr1000yarder

Man if that was for a BBC I'd be all over it!

We can supply you with the same setup for a BBC, the parts are worth twice as much though. Mel

[jr1000yarder]

Originally Posted by Classic Bowties

We can supply you with the same setup for a BBC, the parts are worth twice as much though. Mel

I have the brackets...... Just need pump, hoses, diverter valve

LMK

Rich

[DeadheadNM]

Mel I'll take the parts thanks. Do you happen to have the smog pump I could use for a core and/or the manifold injection tube thingys? Will take the horn/harness too pending Johns reply. Thanks again. Pete

Edit: any chance you have the pulley and bracket attachment bolts? I could also use about one dozen OEM bolts to affix the front end sheetmetal like inner to outer fenders - have captured washers.

[DeadheadNM]

Mel - John was able to set me up with the horn, thank you. I'm in for the smog equip above and and spare bolts if you have them (manifold tubes and pump as well). Pete

[Classic Bowties]

Originally Posted by DeadheadNM

Mel - John was able to set me up with the horn, thank you. I'm in for the smog equip above and and spare bolts if you have them (manifold tubes and pump as well). Pete

Hi Pete, no smog pump, injection tubes or other pump related hardware for a small block, if I had it would have been stored away in the crate with this pictured SBC stuff. I can however throw in a handful of the front end sheet metal bolts. Sending you our payment info now, Mel.

[DeadheadNM]

Payment sent - thanks again Mel

[Classic Bowties]

Originally Posted by DeadheadNM

Payment sent - thanks again Mel

Pete, your a.i.r./smog parts are under way, the package went out USPS priority insured on Thur. 08/18, the projected delivery date listed on the postal receipt is Sat. 08/20. We stuck a few extra non-requested front end specialty bolts in with your shipment. Thanks again for the repeat business, Mel.