Help from guys with 3" exhaust - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Mrturner1 · 08-17-2016, 11:40 PM

I was wondering what mufflers you guys with 3" exhaust are using? I lnow its gonna be loud regardless, but which ones make a real nice tone or exhaust note? I've been watching YouTube and so far I've liked

DynoMax Bullets
Dynomax Ultraflo mufflers
Borla XR1's but it was a crappy vid so couldn't really tell how it sounded

Please include video and how your exhaust is set up. I have been hearing that muffler placement has a big part in sound as well??

aboesec10 · 08-18-2016, 09:14 AM

Im running Flowmaster 10's.... Its loud as hell but hard to beat at @3000 rpm's, Will almost give you a chubby!!!lol

AnotherWs6 · 08-18-2016, 10:05 AM

Quote:

Originally Posted by aboesec10

Im running Flowmaster 10's.... Its loud as hell but hard to beat at @3000 rpm's, Will almost give you a chubby!!!lol

You behave and do not suggest this to anyone, lol. I'm sure it sounds amazing but good G it must be loud.

GASoline71 · 08-18-2016, 10:18 AM

3" pipe through Flowmaster 40's.

Made the system myself out of a 10' stick of 3" tube and one mandrel bent 3" 180. Side exit at an angle in front of the rear tires.

Gary

Mrturner1 · 08-18-2016, 10:39 AM

Quote:

Originally Posted by GASoline71

3" pipe through Flowmaster 40's.

Made the system myself out of a 10' stick of 3" tube and one mandrel bent 3" 180. Side exit at an angle in front of the rear tires.

Gary

That's kindof what I was thinking too. What's the difference between those and Flowmaster 44's?

Mrturner1 · 08-18-2016, 10:41 AM

Quote:

Originally Posted by aboesec10

Im running Flowmaster 10's.... Its loud as hell but hard to beat at @3000 rpm's, Will almost give you a chubby!!!lol

I have 10's on it now and it's definetly loud, but I want more of an exhaust one to it with the loudness

Custom.Chevy · 08-18-2016, 10:52 AM

im running dynomax race bullet mufflers on my 3" system . i have no crossover pipe and side exit before the rear tire. yes its very loud at high rpms but really not bad at cruising speeds and highway use. the idle sound is to die for though. to each his own.

snj8198 · 08-18-2016, 11:04 AM

Quote:

Originally Posted by GASoline71

3" pipe through Flowmaster 40's.

Made the system myself out of a 10' stick of 3" tube and one mandrel bent 3" 180. Side exit at an angle in front of the rear tires.

Gary

Same thing here but I have the tips exiting angled out behind the rear spring shackles and have an H-pipe just behind the collector. The system is hooked to Hooker Comp full length headers.

**68350** · 08-18-2016, 12:00 PM

I have 3 inch pypes violators on my camaro. It sounds pretty amazing!

Marshy · 08-18-2016, 12:56 PM

I'll see if I can get a clip loaded of my truck. I only have 2.5" but do have super 40's. I love their growl and idle note.

Ekliptix · 08-18-2016, 01:18 PM

Not installed yet, but I have 3" with a X-Pipe and I chose Spintech mufflers after a lot of youtube videos.

http://www.spintechmufflers.com/muff...0/cat_175.html
On a vette: https://www.youtube.com/watch?v=BdoSrdvKGhk

Will upload a video when it's done in 2-3 weeks.

Mrturner1 · 08-18-2016, 02:19 PM

Quote:

Originally Posted by Custom.Chevy

im running dynomax race bullet mufflers on my 3" system . i have no crossover pipe and side exit before the rear tire. yes its very loud at high rpms but really not bad at cruising speeds and highway use. the idle sound is to die for though. to each his own.

This I would like to hear. I had a pair of bullets in 2.5" and returned them when I went to 3". Dynomax bullets sound great at WOT too

Boyd67 · 08-18-2016, 04:49 PM

Quote:

Originally Posted by 68350

I have 3 inch pypes violators on my camaro. It sounds pretty amazing!

I 2nd this. They sound sweet and when the old inline becomes a v8 they will be going on my truck

Boyd67 · 08-18-2016, 04:54 PM

70 Chevelle SBC mild cam Pypes Violator
http://youtu.be/fOnk9ws-Dio

69 Chevelle Pypes Street Pro
http://youtu.be/XLHrumt58jQ

Both sound good. I think violator is just a little louder than street pro

Mrturner1 · 08-19-2016, 12:29 AM

Quote:

Originally Posted by Boyd67

70 Chevelle SBC mild cam Pypes Violator
http://youtu.be/fOnk9ws-Dio

69 Chevelle Pypes Street Pro
http://youtu.be/XLHrumt58jQ

Both sound good. I think violator is just a little louder than street pro

Those Pypes street pros sound great! How do they sound under acceleration and WOT?

Mrturner1 · 08-19-2016, 12:31 AM

This is my new 3" setup with Flowmaster 10's. I love the idle, but there's really no cruise or part throttle tone to it, just loud. Idles wicked though lol

https://youtu.be/dlPlRTIL2wA

ReeceB · 08-19-2016, 01:34 AM

I Vote Dynomax ultra flow too, they are great for cruising around as you can hear your self think, but when getting on the loud pedal they get mean as!

They don't sound as hollow/tin can as the Flowmasters, they have a more deep throaty sound.

un4gvn! · 08-19-2016, 03:16 AM

I have 2" Hooker Comp full length headers through 3" Pypes turn downs with cut outs coming out under the doors for fun and racing. The other end of the 3" Pypes flow through a flowmaster x pipe and super 44s and dump just before the rear end. I want to run a tail pipe over the rear and dump under the rear bumper. The panard bar and blazer tank are giving me a challenge. I'll get it.

**Ironangel** · 08-19-2016, 03:50 AM

I'm running Thrush 17649 Welded mufflers off Hedman 69110's and dumped in front of the MT 50's. They sound awesome, can vary the growl tone with throttle position...

aboesec10 · 08-19-2016, 09:27 AM

Quote:

Originally Posted by AnotherWs6

You behave and do not suggest this to anyone, lol. I'm sure it sounds amazing but good G it must be loud.

Oh i love it!! my neighbor may not though......

Boyd67 · 08-19-2016, 09:57 AM

Quote:

Originally Posted by Mrturner1

Those Pypes street pros sound great! How do they sound under acceleration and WOT?

Violator drive by
https://youtu.be/sC9LUu4tZnM

Street pros
https://youtu.be/64XIkPvT7_g

Marshy · 08-19-2016, 11:50 PM

Let me know if this clip doesn't work.

Http://s600.photobucket.com/user/WMa...22740.mp4.html

Mrturner1 · 08-20-2016, 01:42 AM

Quote:

Originally Posted by Marshy

Let me know if this clip doesn't work.

Http://s600.photobucket.com/user/WMa...22740.mp4.html

What kind of mufflers are those? Sounds pretty good man. And what a beautiful truck.

Marshy · 08-20-2016, 08:20 AM

Quote:

Originally Posted by Mrturner1

What kind of mufflers are those? Sounds pretty good man. And what a beautiful truck.

Thanks! They are Flowmaster Delta Flow Super 40's. I have long tube headers with (IIRC) 1-5/8" primary to 3" collectors. Then reduced to 2-1/5" pipes with no cross over.

Custom.Chevy · 08-23-2016, 01:11 PM

Quote:

Originally Posted by Mrturner1

This I would like to hear. I had a pair of bullets in 2.5" and returned them when I went to 3". Dynomax bullets sound great at WOT too

Im running long tube headers to 3 inch collectors as well i guess i forgot to mention that part. I wish we could post short little videos here or audio clips.

08-17-2016, 11:40 PM	#1
Mrturner1 Registered User Join Date: Nov 2015 Location: Colfax California Posts: 1,644	Help from guys with 3" exhaust I was wondering what mufflers you guys with 3" exhaust are using? I lnow its gonna be loud regardless, but which ones make a real nice tone or exhaust note? I've been watching YouTube and so far I've liked DynoMax Bullets Dynomax Ultraflo mufflers Borla XR1's but it was a crappy vid so couldn't really tell how it sounded Please include video and how your exhaust is set up. I have been hearing that muffler placement has a big part in sound as well??

08-18-2016, 09:14 AM	#2
aboesec10 Registered User Join Date: Jan 2010 Location: Katy Texas Posts: 501	Re: Help from guys with 3" exhaust Im running Flowmaster 10's.... Its loud as hell but hard to beat at @3000 rpm's, Will almost give you a chubby!!!lol __________________ c10clubtexas

08-18-2016, 10:52 AM	#7
Custom.Chevy Registered User Join Date: Apr 2016 Location: Klamath Falls Oregon Posts: 135	Re: Help from guys with 3" exhaust im running dynomax race bullet mufflers on my 3" system . i have no crossover pipe and side exit before the rear tire. yes its very loud at high rpms but really not bad at cruising speeds and highway use. the idle sound is to die for though. to each his own. __________________ instagram - @custom.chevy

08-18-2016, 12:00 PM	#9
68350 Senior Member Join Date: Jan 2002 Location: Williston, ND Posts: 2,999	Re: Help from guys with 3" exhaust I have 3 inch pypes violators on my camaro. It sounds pretty amazing! __________________ 68 Chevy CST/10, 50th Anniversary, 327/th400, 373 posi, buckets 68 GMC Shortbox Stepside, 402/th400, Tilt, Tach, Bucket Seats, 3.08 Positraction 69 Chevy Camaro SS, 383, 4 speed, positraction 70 Chevy El Camino SS396, Triple Black, 454/th400, Tach 70 Chevy Shortbox Stepside 4x4, 350/th350, Tilt, Tach, Cab Lights, Bumper Guards, Tow Hooks 70 Chevy 3/4 Longbox, 350/auto, 70k, SURVIVOR 71 Chevy Blazer, CST, 350/auto 71 GMC Sierra K2500, 454, 4 speed, 4.10 posi, 37s 71 Custom/30, Open Road, 350/th400, tilt 72 Chevy Shortbox Fleetside, 496 Stroker/th400, Tilt, Tach, Bucket Seats, 3.42 Posi 72 GMC Sierra Grande 2500. 427/th400, tilt, a/c, tool and stowage, buckets/console, 3.54 posi

08-18-2016, 12:56 PM	#10
Marshy Registered User Join Date: Nov 2012 Location: Mexico, NY Posts: 559	Re: Help from guys with 3" exhaust I'll see if I can get a clip loaded of my truck. I only have 2.5" but do have super 40's. I love their growl and idle note. __________________ '84 K10, SM465, NP208, 3.42 Gears, 33x12.5-15 GM 4 bolt 880 roller block, 062 Vortec Heads Comp Cams XR258HR-10, MSD Street Fighter HEI Edelbrock: Performer Intake 2116, 1405 Carb Long tube headers, 2.5" duals to Flow Master Super 40's Vortec Engine Build

08-18-2016, 01:18 PM	#11
Ekliptix Registered User Join Date: Aug 2013 Location: Calgary, Alberta Posts: 681	Re: Help from guys with 3" exhaust Not installed yet, but I have 3" with a X-Pipe and I chose Spintech mufflers after a lot of youtube videos. http://www.spintechmufflers.com/muff...0/cat_175.html On a vette: https://www.youtube.com/watch?v=BdoSrdvKGhk Will upload a video when it's done in 2-3 weeks.

08-18-2016, 04:54 PM	#14
Boyd67 Registered User Join Date: Feb 2016 Location: China Grove, NC Posts: 93	Re: Help from guys with 3" exhaust 70 Chevelle SBC mild cam Pypes Violator http://youtu.be/fOnk9ws-Dio 69 Chevelle Pypes Street Pro http://youtu.be/XLHrumt58jQ Both sound good. I think violator is just a little louder than street pro __________________ Boyd -67' C10 SWB FLEETSIDE LS 5.3 4 speed muncie Last edited by Boyd67; 08-18-2016 at 05:01 PM. Reason: Added video

08-19-2016, 12:31 AM	#16
Mrturner1 Registered User Join Date: Nov 2015 Location: Colfax California Posts: 1,644	Re: Help from guys with 3" exhaust This is my new 3" setup with Flowmaster 10's. I love the idle, but there's really no cruise or part throttle tone to it, just loud. Idles wicked though lol https://youtu.be/dlPlRTIL2wA

08-19-2016, 01:34 AM	#17
ReeceB Registered User Join Date: May 2016 Location: vancouver BC Posts: 11	Re: Help from guys with 3" exhaust I Vote Dynomax ultra flow too, they are great for cruising around as you can hear your self think, but when getting on the loud pedal they get mean as! They don't sound as hollow/tin can as the Flowmasters, they have a more deep throaty sound.

08-19-2016, 03:16 AM	#18
un4gvn! Registered User Join Date: Mar 2006 Location: Latrobe, Pa. 15650 Posts: 344	Re: Help from guys with 3" exhaust I have 2" Hooker Comp full length headers through 3" Pypes turn downs with cut outs coming out under the doors for fun and racing. The other end of the 3" Pypes flow through a flowmaster x pipe and super 44s and dump just before the rear end. I want to run a tail pipe over the rear and dump under the rear bumper. The panard bar and blazer tank are giving me a challenge. I'll get it.

08-19-2016, 03:50 AM	#19
Ironangel Senior Member Join Date: Feb 2010 Location: Falls City, Nebraska "100 Miles From Nowhere" Posts: 2,219	Re: Help from guys with 3" exhaust I'm running Thrush 17649 Welded mufflers off Hedman 69110's and dumped in front of the MT 50's. They sound awesome, can vary the growl tone with throttle position... __________________ Michael of the clan Hill, "Two Seventy Two's" 71 1-ton Dually 350 4-Speed 71 C/50 Grain Truck, 350 Split-Axle 4-Speed 02 3/4 ton Express 14 Indian Chief Vintage 1952 Ford 8N, "Only Ford Allowed On The Property" "Be American, Buy American"

08-19-2016, 11:50 PM	#22
Marshy Registered User Join Date: Nov 2012 Location: Mexico, NY Posts: 559	Re: Help from guys with 3" exhaust Let me know if this clip doesn't work. Http://s600.photobucket.com/user/WMa...22740.mp4.html __________________ '84 K10, SM465, NP208, 3.42 Gears, 33x12.5-15 GM 4 bolt 880 roller block, 062 Vortec Heads Comp Cams XR258HR-10, MSD Street Fighter HEI Edelbrock: Performer Intake 2116, 1405 Carb Long tube headers, 2.5" duals to Flow Master Super 40's Vortec Engine Build



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.