CA WTB: Factory heater delete firewall panel

[ghalperin]

My truck originally was built as heater delete and I want to remove the dealer installed heater. I still have the original dash plate. Thanks for any leads.
Posted via Mobile Device
Posted via Mobile Device

[hooverfish]

Board member jasonvw reproduces this part for sale. Check this link:

http://67-72chevytrucks.com/vboard/s...ghlight=delete

Originals are very hard to find .

[Classic Bowties]

Are you considering the above linked repro/copy of the firewall heater delete panel? If you prefer OE, we can supply you with an original heater delete firewall panel removed from a 70 short stepside, it probably wouldn't be until Monday 8/22 that I could research what the OE one's have been trading hands at and what the price split would be since you already have the interior dash delete/control panel block off plate. Let us know, Mel.

[ghalperin]

Originally Posted by hooverfish

Board member jasonvw reproduces this part for sale. Check this link:

http://67-72chevytrucks.com/vboard/s...ghlight=delete

Originals are very hard to find .

I sent him a PM with no response yet.
Posted via Mobile Device

[ghalperin]

Originally Posted by Classic Bowties

Are you considering the above linked repro/copy of the firewall heater delete panel? If you prefer OE, we can supply you with an original heater delete firewall panel removed from a 70 short stepside, it probably wouldn't be until Monday 8/22 that I could research what the OE one's have been trading hands at and what the price split would be since you already have the interior dash delete/control panel block off plate. Let us know, Mel.

I want it, let me know. I'll send you a pm.
Posted via Mobile Device

[invicta455]

not trying to hijack your post but if you take the under hood block off i ll take the interior plate if you don't need that

[35boulder]

I tried to go to the thread posted by hooverfish and that thread is closed. Not sure what that means but there you have it.

[ghalperin]

Originally Posted by Classic Bowties

Are you considering the above linked repro/copy of the firewall heater delete panel? If you prefer OE, we can supply you with an original heater delete firewall panel removed from a 70 short stepside, it probably wouldn't be until Monday 8/22 that I could research what the OE one's have been trading hands at and what the price split would be since you already have the interior dash delete/control panel block off plate. Let us know, Mel.

Have you decided on a price?
Posted via Mobile Device

[lolife99]

Originally Posted by hooverfish

Board member jasonvw reproduces this part for sale. Check this link:

http://67-72chevytrucks.com/vboard/s...ghlight=delete

Originals are very hard to find .

This is the reproduction version member jasonvw sells.

[Classic Bowties]

Originally Posted by ghalperin

Have you decided on a price?
Posted via Mobile Device

Yes, had a chance to do a bit of research yesterday. Am going to ask $225. plus shipping cost on the firewall heater delete cover, will get some pictures taken and posted later today. Mel

[Classic Bowties]

Originally Posted by lolife99

This is the reproduction version member jasonvw sells.

Hi Keith, have you purchased one of these repro heater delete firewall covers yet, any feedback to give on them? We have a Cali customer that mentioned these repro's are molded in a plastic resin and have a sorta plastic feeling to them, can you confirm if the copies are metal or plastic? Thanks, Mel.

[ghalperin]

Originally Posted by Classic Bowties

Hi Keith, have you purchased one of these repro heater delete firewall covers yet, any feedback to give on them? We have a Cali customer that mentioned these repro's are molded in a plastic resin and have a sorta plastic feeling to them, can you confirm if the copies are metal or plastic? Thanks, Mel.

They are fiberglass.
Posted via Mobile Device

[ghalperin]

Originally Posted by Classic Bowties

Yes, had a chance to do a bit of research yesterday. Am going to ask $225. plus shipping cost on the firewall heater delete cover, will get some pictures taken and posted later today. Mel

Pm sent with shipping address
Posted via Mobile Device

[Pancho_peso]

If anyone has an extra dash heater delete plate I'll take it

[lolife99]

Originally Posted by Pancho_peso

If anyone has an extra dash heater delete plate I'll take it

Good luck with that. Super rare piece. ($$$)

[Pancho_peso]

Originally Posted by lolife99

Good luck with that. Super rare piece. ($$$)

Would a radio plate work

[Classic Bowties]

Originally Posted by ghalperin

I want it, let me know. I'll send you a pm.
Posted via Mobile Device

Originally Posted by ghalperin

Pm sent with shipping address
Posted via Mobile Device

Here are the pics of the optional RPO C48 "Heater & Defroster Deletion" metal delete plates, both plates are OE removed from a 70 short step w/spid stating "C48 Less Heater EQ". The firewall plate is free of dents, bends and rust but will need some holes welded up, overall its a nice solid straight hard to find piece. As stated above the price is $225., shipping via USPS priority insured is $18.05 to CA. 92627. As mentioned above we will split this delete plate set up, should you decide to pass on the firewall delete plate, we will go in order of received interest as stated below. Thanks, Mel.

Order of interest
Firewall Heater delete plate: ghalperin, 68bowtie
Interior control delete plate: invicta455, Pancho_peso

[ghalperin]

Where do you want the money sent? Do you have the round cover as well? I also have a list of other parts needed?

[Pancho_peso]

Originally Posted by Classic Bowties

Here are the pics of the optional RPO C48 "Heater & Defroster Deletion" metal delete plates, both plates are OE removed from a 70 short step w/spid stating "C48 Less Heater EQ". The firewall plate is free of dents, bends and rust but will need some holes welded up, overall its a nice solid straight hard to find piece. As stated above the price is $225., shipping via USPS priority insured is $18.05 to CA. 92627. As mentioned above we will split this delete plate set up, should you decide to pass on the firewall delete plate, we will go in order of received interest as stated below. Thanks, Mel.

Order of interest
Firewall Heater delete plate: ghalperin, 68bowtie
Interior control delete plate: invicta455, Pancho_peso

It's crazy my first post isn't showing on here this thread is what made me become a member

[Classic Bowties]

Originally Posted by ghalperin

Where do you want the money sent? Do you have the round cover as well? I also have a list of other parts needed?

A pm has been sent with or payment info. It's a no on the round cover, all that we offered had here in this thread was the firewall delete and the interior control delete plates. Thanks, Mel.

[ghalperin]

Are you interested in selling other parts?

[Classic Bowties]

Originally Posted by Pancho_peso

It's crazy my first post isn't showing on here this thread is what made me become a member

You have already been placed inline on the interior control delete plate, or are you saying that you had posted interest before invicta455? If so, and being that we are a paid site vendor here and you were getting inline for a part being offered F/S here, the only explanation I can think of for your post being deleted is that your name/handle is still pink, they are fairly serious around here about collecting the due's and you may want to get paid up. Mel

[invicta455]

I'll take the dash plate pm payment info

[Classic Bowties]

Originally Posted by ghalperin

Are you interested in selling other parts?

What is it that you are needing? We have a ton of stuff between two locations but time is pretty scarce at the moment if the needed stuff/parts are not already pulled and on the shelf. Mel

Also, here are a couple of clearer shots taken outside showing the holes needing repaired.

[Pancho_peso]

Originally Posted by Classic Bowties

You have already been placed inline on the interior control delete plate, or are you saying that you had posted interest before invicta455? If so, and being that we are a paid site vendor here and you were getting inline for a part being offered F/S here, the only explanation I can think of for your post being deleted is that your name/handle is still pink, they are fairly serious around here about collecting the due's and you may want to get paid up. Mel

I even sent you a DM asking you about it