Hazard lights?

[Wildstreak]

Rewired my truck with painless and the turn signals worked but no hazards, I replaced the switch and still no hazard lights. The fuse is good and all the other lights work fine. Any ideas?

[Jarvis-69 GMC 1500CK]

As far as I can tell (I do not know much) it has a different flasher unit for 4 ways, try making sure using a power probe the flasher socket is doing something, from there you can make your way to the switch.

I don't think the issue would be past the fuse box, they all use the same wires anyways.

I was doing some troubleshooting because nothing in my truck works the way it is supposed to (actually going to be getting a painless harness next year out of frustration).

I found when I took the bigger flasher unit out the 4 ways would stop all together, so I assume that is a flasher for the 4 ways.

Take my advise with a grain of salt though, this is just what I assume, and assuming makes an ass out of you and me!

[Wildstreak]

There was a second flasher fuse I was missing in the top left that I didnt think about. Thanks man all working now!

[Jarvis-69 GMC 1500CK]

yay! first issue actually solved and it is not even on my truck glad I could help.

How easy are the painless harness's by the way?