The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1947 - 1959 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 09-29-2016, 11:09 PM   #1
LEEVON
Moderator
 
LEEVON's Avatar
 
Join Date: Jul 2006
Location: Ozark, MO
Posts: 4,888
Fuel gauge problems

I have a new, factory style gauge set with the updated oil pressure and temp. I also have a new fuel sending unit, in a brand new tank, with brand new wiring. Both the gauge and sending unit are supposed to be as original, 30ohm. With a full tank the needle barely reads empty, but it does move from the rest position with key on. The float is not obstructed. I have tried two sending units. Is it possible the gauge is not actually 30ohm as advertised? I called Classic Parts again to be sure. Where does my troubleshooting start?
__________________
'20 Silverado Trail Boss ~ '17 Tahoe ~ '79 K15 Sierra Grande ~ '76 Blazer 2wd ~ '71 Cheyenne swb ~ '55 Pontiac Safari ~'50 3100 bagged ~ '80 Wife ~ Late model kids
LEEVON is offline   Reply With Quote
Old 09-30-2016, 01:37 PM   #2
mr48chev
Registered User
 
mr48chev's Avatar
 
Join Date: Jul 2007
Location: Toppenish, WA
Posts: 15,705
Re: Fuel gauge problems

It's pretty easy to test the sending unit with an ohm meter but I've never tested the guage it's self and don't remember seeing a process for checking one.

The only thing I have done in that respect is to connect the sender to the lead from the gauge and ground and run the arm though it's arc to see if the gauge reads so that it matches the position of the sender. I've done that with aftermarket gauges and senders.
__________________
Founding member of the too many projects, too little time and money club.

My ongoing truck projects:
48 Chev 3100 that will run a 292 Six.
71 GMC 2500 that is getting a Cad 500 transplant.
77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.
mr48chev is offline   Reply With Quote
Old 09-30-2016, 02:21 PM   #3
joedoh
Senior Member
 
joedoh's Avatar
 
Join Date: May 2007
Location: Doodah Kansas
Posts: 7,774
Re: Fuel gauge problems

I wrote up on testing a fuel sender and gauge last time this came up, here is the link

67-72chevytrucks.com/vboard/showthread.php?t=714135
__________________
the mass of men live lives of quiet desperation


if there is a problem, I can have it.

new project WAYNE http://67-72chevytrucks.com/vboard/s...d.php?t=844393
joedoh is offline   Reply With Quote
Old 09-30-2016, 10:09 PM   #4
LEEVON
Moderator
 
LEEVON's Avatar
 
Join Date: Jul 2006
Location: Ozark, MO
Posts: 4,888
Re: Fuel gauge problems

Thanks fellas! Joedoh that's exactly the dumbed down diagnostic procedure I needed...will be back with results. Leevon
__________________
'20 Silverado Trail Boss ~ '17 Tahoe ~ '79 K15 Sierra Grande ~ '76 Blazer 2wd ~ '71 Cheyenne swb ~ '55 Pontiac Safari ~'50 3100 bagged ~ '80 Wife ~ Late model kids
LEEVON is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 09:08 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com