Drag Link 2wd vrs. 4wd - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*ck5566* · 09-30-2016, 08:30 PM

I would like to know if there is any difference's in the 1/2 ton 2wd from the 1/2 ton 4wd trucks drag/center links. Here is a ruff drawing of what mine measures out to. Thanks in advance for any help.

**jerry moss** · 09-30-2016, 10:22 PM

2wd vs 4wd are totally different. even the steering box sector shaft is different.

'68 Newtricks · 10-01-2016, 01:31 AM

Even 1/2 ton VS 3/4 ton 2wd trucks are different. Hole taper is different.

*ck5566* · 10-01-2016, 11:02 AM

Quote:

Originally Posted by ck5566

I would like to know if there is any difference's in the 1/2 ton 2wd from the 1/2 ton 4wd trucks drag/center links. Here is a ruff drawing of what mine measures out to. Thanks in advance for any help.

I should have said my truck is a 68 C10 6cyl if that matters and non power steering if that also matters. Also is the Angles different at the points where the Pitman Arm & Idler Arm & the Tie Rod Ends are in relation to each other from the 2wd to the 4wd Trucks, Thanks again in advance

Bigdav160 · 10-01-2016, 11:07 AM

4WD doesn't use parallelogram linkage but rather push - pull with toe rod

*ck5566* · 10-01-2016, 11:14 AM

Quote:

Originally Posted by Bigdav160

4WD doesn't use parallelogram linkage but rather push - pull with toe rod

NOW you got me there, can you explain that "parallelogram linkage" but rather push-pull with toe rod mouth full of word thing to me. LOL on the last sentence.

09-30-2016, 08:30 PM	#1
ck5566 Account Suspended Join Date: Apr 2016 Location: Rancho Mirage, Ca. Posts: 875	Drag Link 2wd vrs. 4wd I would like to know if there is any difference's in the 1/2 ton 2wd from the 1/2 ton 4wd trucks drag/center links. Here is a ruff drawing of what mine measures out to. Thanks in advance for any help. Attached Images

09-30-2016, 10:22 PM	#2
jerry moss Born Psycho Join Date: Feb 2001 Location: brentwood,cal,usa Posts: 4,936	Re: Drag Link 2wd vrs. 4wd 2wd vs 4wd are totally different. even the steering box sector shaft is different. __________________ jerry moss 72 cheyenne super K20- tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,tow hooks,bumper guards,toolbox,aux. fuel tank,posi front and rear,plus other goodies!!! SOLD 69 suburban K20-tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,4 inch all spring lift,4 speed, 14 bolt full floater, dana 44 HD,warn winch,posi front and rear,tow hooks,plus other goodies. 73/80 chevy/gmc K20 SB400,turbo 400,205,tilt,a-c,gas hog. 77 K/5 cheyenne blazer-daily driver/beater. SON HAS IT NOW BRENTWOOD,CALIFORNIA

10-01-2016, 01:31 AM	#3
'68 Newtricks Registered User Join Date: Feb 2014 Location: Los Angeles area :( Posts: 499	Re: Drag Link 2wd vrs. 4wd Even 1/2 ton VS 3/4 ton 2wd trucks are different. Hole taper is different. __________________ '68 C10 SWB '85 K30 Blazer

10-01-2016, 11:07 AM	#5
Bigdav160 Registered User Join Date: Apr 2011 Location: Klein Texas Posts: 3,852	Re: Drag Link 2wd vrs. 4wd 4WD doesn't use parallelogram linkage but rather push - pull with toe rod __________________ My Classics: '72 K20 Suburban + '65 Dodge Town Wagon '72 Corvette Roadster +'67 Corvette Roadster '73 Z-28 Camaro '63 Ford SWB Uni Pickup '50 Ford Coupe



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.