Help with LED installation into parking lights - The 1947 - Present Chevrolet & GMC Truck Message Board Network

prin · 10-01-2016, 09:24 PM

So, I have read almost every post dealing with LEDs on here. I bought some 1156 leds for my front park/signal lights. Installed them along with a EL12 flasher, and of course, they would flash when the signal light was triggered. But, they would not flash with parking lights turned on. I even tried putting a load resistor in and still the same thing. What am I missing here???

Andy4639 · 10-01-2016, 09:45 PM

Quote:

Originally Posted by prin

So, I have read almost every post dealing with LEDs on here. I bought some 1156 leds for my front park/signal lights. Installed them along with a EL12 flasher, and of course, they would flash when the signal light was triggered. But, they would not flash with parking lights turned on. I even tried putting a load resistor in and still the same thing. What am I missing here???

The bulbs you are talking about are not in my opinion worth the money are the trouble they will cause in the truck. I tried everything several years ago and nothing worked. I gave up and bought panel LED for the truck.

Robznob11 · 10-01-2016, 09:55 PM

My guess would be this. The wires are reverse for the functions you want. They probably have a resistor in them so they have a bright side and a dime side. Since it is backwards of your system you get a blink on the dim side when the park light is off, but when you turn the park light on you have full voltage making them constant bright. Therefore you see no blink. Now the only way to know for a fact is flip your wires around but that probably requires cutting them and in my .02 not worth the trouble caus they are not very good or bright any how. The dim side should be constant on with park. Then when you hit turn you get full voltage and the light gets brighter causing a noticeable blink.

prin · 10-01-2016, 10:04 PM

Hmm, yeah, I really don't want to switch wires around. I could have sworn that someone had made this work somehow! Thanks for the responses! Keep them coming!!!!

Robznob11 · 10-01-2016, 10:11 PM

Well the thing is gm did not wire every truck exactly the same. I get this with tail light installs. Some work great. Some have to swap their wires. I guess they figured it did not matter since a bulb will work the same no matter how you turn it. Leds are not like that. One wire is park one is turn and it gets ground from the housing. If you have 3 wires and alligator clips you could at least check with out cutting....

prin · 10-01-2016, 10:29 PM

OK, thanks Rob! I will try that tomorrow!!

firedemon · 10-01-2016, 11:04 PM

if its an 1156 bulb the pins are the same height you can just flip the bulb in the socket but aren't 1156 only 1 filament bulbs anyway they wouldn't have a bright and dim

prin · 10-02-2016, 11:22 PM

Update: I tried to flip the wires around lid Rob suggested and still the same error. It was like I did nothing. I am pretty confused on this one!!!

prin · 10-02-2016, 11:23 PM

Quote:

Originally Posted by firedemon

if its an 1156 bulb the pins are the same height you can just flip the bulb in the socket but aren't 1156 only 1 filament bulbs anyway they wouldn't have a bright and dim

I think they are 1157 bulbs. Sorry, but the pins aren't the same height.

Robznob11 · 10-02-2016, 11:24 PM

Wow. I'm stumped. Can't think of what would cause it.not to work.

**Already Gone** · 10-03-2016, 05:20 AM

subscribed

Andy4639 · 10-03-2016, 01:29 PM

Good luck with it.

As I stated in my first post I never could get them to work like they advertised. Just a big head ache and time consuming.
I also swapped wires and fixed wires and changed fittings. You name it I did it!
Keep at it though and maybe you will discover what the right combo is to get them working.

prin · 10-19-2016, 10:18 PM

I have finally got this to work!!!!! So, I ordered a flasher with dual polarity and the ground lead wire. Installed it today and I also installed an led into the side marker on that side. That's all it took!!!

71meangreenc10 · 10-20-2016, 02:19 PM

Quote:

Originally Posted by prin

I have finally got this to work!!!!! So, I ordered a flasher with dual polarity and the ground lead wire. Installed it today and I also installed an led into the side marker on that side. That's all it took!!!

Can you post a link for the flasher or part number?

Smitty

cmg96 · 10-20-2016, 03:37 PM

So how do they look in comparison to the original? Do you see a major difference and what is the total out of pocket on your project?
I was looking at replacing mine with the LEDs not just the bulbs. Do you have any before and after pics?

prin · 10-20-2016, 08:58 PM

I have only done one side. I will do a comparison in a day or so.

Quote:

Originally Posted by cmg96

So how do they look in comparison to the original? Do you see a major difference and what is the total out of pocket on your project?
I was looking at replacing mine with the LEDs not just the bulbs. Do you have any before and after pics?

RUN GMC · 10-20-2016, 10:38 PM

You know I could still be persuaded to trade trucks when you get them lights right.....

prin · 10-21-2016, 10:58 PM

Sure, here is an amazon link from where I bought it. Only thing is that once the blinker switch goes back to the neutral position, I still hear the blinker click a couple more times. The lights don't blink, but it makes the sound

EF32RLNP Electronic LED Compatible Turn Signal Flasher Relay, DOT APPROVED, POLARITY INDEPENDENT, 2 Prongs + Ground Wire, 12 Volts
https://www.amazon.com/EF32RLNP-Elec.../dp/B01GIU9M0Y

Quote:

Originally Posted by 71meangreenc10

Can you post a link for the flasher or part number?

Smitty

prin · 10-21-2016, 11:02 PM

Hey Dude! Man you should come with us to TN on the first of the month!!!

Quote:

Originally Posted by RUN GMC

You know I could still be persuaded to trade trucks when you get them lights right.....

71meangreenc10 · 10-22-2016, 01:35 PM

Thanks,

Smitty

Quote:

Originally Posted by prin

Sure, here is an amazon link from where I bought it. Only thing is that once the blinker switch goes back to the neutral position, I still hear the blinker click a couple more times. The lights don't blink, but it makes the sound

EF32RLNP Electronic LED Compatible Turn Signal Flasher Relay, DOT APPROVED, POLARITY INDEPENDENT, 2 Prongs + Ground Wire, 12 Volts
https://www.amazon.com/EF32RLNP-Elec.../dp/B01GIU9M0Y

prin · 10-23-2016, 09:35 PM

Here is difference between regular bulbs and leds...

Here is both leds installed...

This is with the parking lights turned on and the signal light blinking

Here it is with only the signal light flashing and parking lights turned off

Only thing that I wished is that when the parking lights turned on and the signal light on as well, that the light "flashes" more.

10-01-2016, 09:24 PM	#1
prin Registered User Join Date: Oct 2006 Location: Huntsville, AL Posts: 172	Help with LED installation into parking lights So, I have read almost every post dealing with LEDs on here. I bought some 1156 leds for my front park/signal lights. Installed them along with a EL12 flasher, and of course, they would flash when the signal light was triggered. But, they would not flash with parking lights turned on. I even tried putting a load resistor in and still the same thing. What am I missing here???

10-01-2016, 09:55 PM	#3
Robznob11 Registered User Join Date: Feb 2004 Location: brownfield texas (west texas) Posts: 1,936	Re: Help with LED installation into parking lights My guess would be this. The wires are reverse for the functions you want. They probably have a resistor in them so they have a bright side and a dime side. Since it is backwards of your system you get a blink on the dim side when the park light is off, but when you turn the park light on you have full voltage making them constant bright. Therefore you see no blink. Now the only way to know for a fact is flip your wires around but that probably requires cutting them and in my .02 not worth the trouble caus they are not very good or bright any how. The dim side should be constant on with park. Then when you hit turn you get full voltage and the light gets brighter causing a noticeable blink. __________________ The Ghost 67 short wide full custom. 550 hp LSX, 4l80E, narrowed 9". Body dropped w/air ride! ........................ ___ .........________//__{\_____ ,,,,,,,/__(⊙)___//___/__(O)_/ @disciple2.rc 💪instagram💪 LED TAILS

10-01-2016, 10:04 PM	#4
prin Registered User Join Date: Oct 2006 Location: Huntsville, AL Posts: 172	Re: Help with LED installation into parking lights Hmm, yeah, I really don't want to switch wires around. I could have sworn that someone had made this work somehow! Thanks for the responses! Keep them coming!!!!

10-01-2016, 10:11 PM	#5
Robznob11 Registered User Join Date: Feb 2004 Location: brownfield texas (west texas) Posts: 1,936	Re: Help with LED installation into parking lights Well the thing is gm did not wire every truck exactly the same. I get this with tail light installs. Some work great. Some have to swap their wires. I guess they figured it did not matter since a bulb will work the same no matter how you turn it. Leds are not like that. One wire is park one is turn and it gets ground from the housing. If you have 3 wires and alligator clips you could at least check with out cutting.... __________________ The Ghost 67 short wide full custom. 550 hp LSX, 4l80E, narrowed 9". Body dropped w/air ride! ........................ ___ .........________//__{\_____ ,,,,,,,/__(⊙)___//___/__(O)_/ @disciple2.rc 💪instagram💪 LED TAILS

10-01-2016, 10:29 PM	#6
prin Registered User Join Date: Oct 2006 Location: Huntsville, AL Posts: 172	Re: Help with LED installation into parking lights OK, thanks Rob! I will try that tomorrow!!

10-01-2016, 11:04 PM	#7
firedemon Registered User Join Date: Jun 2015 Location: @ Posts: 890	Re: Help with LED installation into parking lights if its an 1156 bulb the pins are the same height you can just flip the bulb in the socket but aren't 1156 only 1 filament bulbs anyway they wouldn't have a bright and dim

10-02-2016, 11:22 PM	#8
prin Registered User Join Date: Oct 2006 Location: Huntsville, AL Posts: 172	Re: Help with LED installation into parking lights Update: I tried to flip the wires around lid Rob suggested and still the same error. It was like I did nothing. I am pretty confused on this one!!!

10-02-2016, 11:24 PM	#10
Robznob11 Registered User Join Date: Feb 2004 Location: brownfield texas (west texas) Posts: 1,936	Re: Help with LED installation into parking lights Wow. I'm stumped. Can't think of what would cause it.not to work. __________________ The Ghost 67 short wide full custom. 550 hp LSX, 4l80E, narrowed 9". Body dropped w/air ride! ........................ ___ .........________//__{\_____ ,,,,,,,/__(⊙)___//___/__(O)_/ @disciple2.rc 💪instagram💪 LED TAILS

10-03-2016, 05:20 AM	#11
Already Gone 70+ ( Old Skool Club ) Join Date: Nov 2003 Location: Saskatoon, Saskatchewan ,Canada Posts: 9,143	Re: Help with LED installation into parking lights subscribed __________________ 1972 C10 Custom/Deluxe 613 Highlander 406/700R4 1999 White Tahoe LS 4x2 with Z56 Police Package 1992 K1500 GMC Suburban Members I have personally met: MusicMan70 - HeavyD - ChewyChevy67 - StingRay -71SWB4x4 - 67 Burb - DeadheadNM - too much stuff - bc65 - das601 " Circumsatances Do Not Change Responsibility " " The Sky is not the Limit, Your Mind is." Marilyn Monroe .. RIP Charlie Watts 1941 - 2021

10-03-2016, 01:29 PM	#12
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Re: Help with LED installation into parking lights Good luck with it. As I stated in my first post I never could get them to work like they advertised. Just a big head ache and time consuming. I also swapped wires and fixed wires and changed fittings. You name it I did it! Keep at it though and maybe you will discover what the right combo is to get them working. __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

10-19-2016, 10:18 PM	#13
prin Registered User Join Date: Oct 2006 Location: Huntsville, AL Posts: 172	Re: Help with LED installation into parking lights I have finally got this to work!!!!! So, I ordered a flasher with dual polarity and the ground lead wire. Installed it today and I also installed an led into the side marker on that side. That's all it took!!!

10-20-2016, 03:37 PM	#15
cmg96 Registered User Join Date: Oct 2016 Location: austin, tx Posts: 115	Re: Help with LED installation into parking lights So how do they look in comparison to the original? Do you see a major difference and what is the total out of pocket on your project? I was looking at replacing mine with the LEDs not just the bulbs. Do you have any before and after pics?

10-20-2016, 10:38 PM	#17
RUN GMC Registered User Join Date: May 2014 Location: North AL Posts: 363	Re: Help with LED installation into parking lights You know I could still be persuaded to trade trucks when you get them lights right..... __________________ http://i204.photobucket.com/albums/b...baae5d9a7e.jpg

10-23-2016, 09:35 PM	#21
prin Registered User Join Date: Oct 2006 Location: Huntsville, AL Posts: 172	Re: Help with LED installation into parking lights Here is difference between regular bulbs and leds... Here is both leds installed... This is with the parking lights turned on and the signal light blinking Here it is with only the signal light flashing and parking lights turned off Only thing that I wished is that when the parking lights turned on and the signal light on as well, that the light "flashes" more.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.